hwTrunkIfBackupPreemptEnable

HUAWEI-IF-EXT-MIB · .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32

Object

column r/w EnabledStatus

The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode.
In default condition, the preemption is disabled.

Context

MIB: HUAWEI-IF-EXT-MIB
OID: .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32
Type: column
Access: readwrite
Status: current
Parent: hwTrunkIfEntry
Table: hwTrunkIfTable
Siblings: 35

Syntax

EnabledStatus

Source: EnabledStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	enabled
`2`	disabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwTrunkIndex The value of this object identifies the index of a trunk interface. The currently supported value ranges from 0 to 511.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1`
hwTrunkIfWorkingState Current working state of backup-access trunk. 1: general mode working state 2: initialization 3: master working 4: backup working	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10`
hwTrunkIfAutoRecover If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11`
hwTrunkIfPreemptEnable This object indicates whether LACP priority preemption in static mode is enabled. By default, this function is not enabled.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12`
hwTrunkIfPreemptDelay The value of this object identifies the delay for LACP priority preemption in static mode. You can set this object only after hwTrunkIfPreemptEnable is enabled. The value ranges f…	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13`
hwTrunkIfTimeoutReceive The value of this object identifies the timeout period for receiving LACPDUs on an interface in static LACP mode. The value can be: fast: specifies the timeout period for receivin…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14`
hwTrunkIfFlushSendEnable Whether or not permit the trunk to transmit FlushDUs.It is only used when it is in the handwork 1:1 mode.Once it is enabled, the newly active interface in the trunk will send Sm…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15`
hwTrunkIfFlushVlanId The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16`
hwTrunkIfFlushPasswd A 16-octet read-create value used to define the password for negotiation.	column	SnmpPasswdString	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17`
hwTrunkIfForceSwitchEnable It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. Howeve…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18`
hwTrunkIfStatReset Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19`
hwTrunkIfID The identification of the Trunk interface. It may identify Trunk and is an index of the interface.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2`
hwTrunkBandwidth Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20`
hwTrunkIfArpSendSpeed Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21`
hwTrunkIfLagSelectedPortStd This object indicates the port selection standard of LACP: based either on the port rate or on the port priority. By default, LACP selects ports based on the port priority. speed(…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22`
hwTrunkIfLagMaxActiveLinkNum The value of this object identifies the upper threshold of interfaces that can be selected by the Eth-Trunk in static mode.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23`
hwTrunkETrunkPriority The priority of the E-Trunk.	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24`
hwTrunkETrunkSysID The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25`
hwTrunkETrunkPriorityReset Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26`
hwTrunkETrunkSysIDReset Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27`
hwTrunkLocalPrefMode Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1).	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28`
hwTrunkIfTrackVrrpVrid The VRID which the static mode Eth-trunk tracked to.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29`
hwTrunkIfType The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3`
hwTrunkIfTrackVrrpIfIndex The VRRP interface which the static mode Eth-trunk tracked to.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30`
hwTrunkIfTrackVrrpReset Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is t…	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31`
hwTrunkIfBackupPreemptDelay The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operati…	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33`
hwTrunkIfCrcErrorSwitchEnable make trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is low	column	EnabledStatus	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.34`
hwTrunkIfLagTimeOut The expired time(Unit is second) of the port to receive LACPDUS in the fast mode. The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in …	column	Integer32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.35`
hwTrunkMemCount The count of Trunk member interfaces per Trunk.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.36`
hwTrunkIfIndex Index number of the Trunk interface, it is consistent with ifIndex of ifTable in IF-MIB.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4`
hwTrunkIfModel Participated model of interface load. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5`
hwTrunkIfBandWidthAffectLinkNum The value of this object identifies the maximum number of trunk interfaces that can be created. By default, the maximum number of trunk interfaces that can be created is 32. This …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6`
hwTrunkIfMinLinkNum The value of this object identifies the minimum number of trunk interfaces that can be created. The currently supported value ranges from 1 to 32. By default, the minimum number o…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7`
hwTrunkIfRowStatus Current operation status of the row	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8`
hwTrunkIfWorkingMode The value of this object identifies the working mode of an Eth-Trunk interface. 1: master/backup access mode 2: normal mode 3: static LACP mode 4: compatible LACP mode 5: …	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9`

Indexes