hwUNIMacLearningPriority
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.1.8
Object
scalar
r/w
Integer32
Indicates the MAC learning priority of the user side in the mainboard. Range: 0-3 Default: 0
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwL2IfMibObject
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotPortMax Describes L2 global interface objects. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.1.1 |
| hwL2MacAgingMode Indicates the MAC address aging mode.
Options:
1. bidirectional(1) -indicates that the MAC address aging mode is bidirectional.
2. unidirectional(2) -indicates that the MAC addr… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.10 |
| hwBoardMacAddressLearningVlanConnectTable Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.1.11 |
| hwMacAddressLearnPolicy Indicates the MAC address learning policy.
Options:
1. svlanBased(1) -indicates that the MAC address learning is based on SVLAN(service VLAN)
2. cvlanBased(2) -indicates that t… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.12 |
| hwMacAddressFlappingDetectionControl Indicates the switch for the MAC address flapping detection.
Options:
1. enabled(1) -Enable the MAC address flapping detection.
2. disabled(2) -Disable the MAC address flapping … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.13 |
| hwMacAddressFlappingDetectionPeriod Indicates the MAC address flapping detection period.
Range: 10-300
Unit: second
Default: 300 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.14 |
| hwMacAddressFlappingDetectionLowerThreshold Indicates the MAC address flapping detection lower threshold. The upper threshold
must be bigger than the lower threshold.
Range: 3-100
Default: 3 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.15 |
| hwMacAddressFlappingDetectionUpperThreshold Indicates the MAC address flapping detection upper threshold. The lower threshold
must be smaller than the upper threshold.
Range: 3-100
Default: 100 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.16 |
| hwFabricMacHashConflictAutoAdjust Indicates the switch for the MAC hash conflict auto adjust.
Options:
1. enabled(1) -indicates that the MAC address hash conflict auto adjust function is enabled.
2. disabled(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.17 |
| hwMacHashConflictRecordTable Indicates the line parameter configuration table of an MAC hash conflict.
It is used to query MAC hash congfig log.
This table mainly involves configuring parameters such as Mac… | table | - | .1.3.6.1.4.1.2011.5.14.1.18 |
| hwSwitchPortMax Max ports that this switch includes | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.1.2 |
| hwMacExpire Indicates the aging time of a dynamic MAC address.
Range: 1000-100000000.
Unit: cent seconds.
When this leaf is set to 0, it indicates that the MAC address does not age.
Default: … | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.5.14.1.3 |
| hwEthernetTable Indicates the line parameter configuration table of an ETH port.
It is used for setting the rate, duplex, auto-negotiation, MDI,
traffic control, Combo mode of an Ethernet port.… | table | - | .1.3.6.1.4.1.2011.5.14.1.4 |
| hwifVLANTrunkStatusTable Indicates the VLAN trunk feature.
The index of this table is hwifVLANTrunkIndex. | table | - | .1.3.6.1.4.1.2011.5.14.1.5 |
| hwSystemSwitchMode Options:
1. standbyPortUp(1) -Auto system switch mode (undo shutdown standby port) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.6 |
| hwFabricMacLearning Indicates the MAC address learning switch of the LSW chip of the control board.
Options:
1. enable(1) -indicates that the MAC address learning switch is enabled
2. disable(2) -i… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.7 |
| hwNNIMacLearningPriority Indicates the MAC learning priority of the network side in the mainboard.
Range: 0-3
Default: 3 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.9 |