hwL2IfMibObject
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.1
Object
node
No description available.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.1- Type
- node
- Parent
- hwEthernetPort
- Siblings
- 36
- Children
- 18
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwEthernetTraps | node | - | .1.3.6.1.4.1.2011.5.14.10 |
| hwStaticMacTable Describes static MAC addresses and used for setting, querying, and deleting static MAC addresses.
The index of this table is hwStaticMacIndex, a free index can be obtained throug… | table | - | .1.3.6.1.4.1.2011.5.14.11 |
| hwStaticMacNextFreeIndex Used for obtaining a free index during the creation of a static MAC address.
The obtained value is used when hwStaticMacIndex is input. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.12 |
| hwPortIsolate | node | - | .1.3.6.1.4.1.2011.5.14.13 |
| hwDynamicMac | node | - | .1.3.6.1.4.1.2011.5.14.14 |
| hwEthHistoryStats | node | - | .1.3.6.1.4.1.2011.5.14.16 |
| hwDynamicMacQueryTable Query Dynamic MAC address.
The indexes of this table are ifIndex, hwDynamicMacVlanId, hwDynamicMacIndex, hwDynamicMacQueryType,
hwDynamicMacQueryPara0, hwDynamicMacQueryPara1, hwD… | table | - | .1.3.6.1.4.1.2011.5.14.17 |
| hwUniServiceDataQueryTable The hwUniServiceDataQueryTable is used for querying the service flow configuration of xDSL port.
This table supports to query bind IP, static MAC, igmp user and service flow.
The… | table | - | .1.3.6.1.4.1.2011.5.14.18 |
| hwVlanIsolateState VlAN isolate state.
Options:
1. enable(1) -indicates the VLAN isolate state is enable
2. disable(2) -indicates the VLAN isolate state is disable | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.19 |
| hwExtInterface | node | - | .1.3.6.1.4.1.2011.5.14.2 |
| hwCtpEthAttributeCfgTable Indicates the CTP_ETH port attribute configuration. The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.20 |
| hwGlobalStatisticOper Query global statistics.
Options:
1. startup(1) -enable global statistics | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.21 |
| hwEthernetTrapsVbOids | node | - | .1.3.6.1.4.1.2011.5.14.22 |
| hwExtDefaultPolicy | node | - | .1.3.6.1.4.1.2011.5.14.23 |
| hwXdslEtherStatsTable Statistics of xdsl port query table.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.24 |
| hwExtProtocolForwardingPolicyTable | node | - | .1.3.6.1.4.1.2011.5.14.25 |
| hwServiceTypeDetect | node | - | .1.3.6.1.4.1.2011.5.14.26 |
| hwEthernetLine | node | - | .1.3.6.1.4.1.2011.5.14.27 |
| hwDownMcTrafficPolicy Indicates the traffic policy of downstream multicast packets.
Options:
1. noconfig(1) -indicates no configuration ,the traffic policy of downstream multicast packets is decided b… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.28 |
| hwPortPermitForwardTable The indexes of this table are hwExtPermitForwardIfIdex and hwExtPermitForwardSecondIndex.
This table is used to set or query the forwarding status of the port protocol packet.
It … | table | - | .1.3.6.1.4.1.2011.5.14.29 |
| hwExtIpdslam | node | - | .1.3.6.1.4.1.2011.5.14.3 |
| hwResourceOverloadAwareTable The index of this table is hwResourceType.
This table is used to query the configuration of resource overload.
It supports the query and set operations. | table | - | .1.3.6.1.4.1.2011.5.14.30 |
| hwInfinibandTable The index of this table is ifIndex.
This table is used to query the status parameters of infiniband port. | table | - | .1.3.6.1.4.1.2011.5.14.31 |
| hwInfinibandTraps | node | - | .1.3.6.1.4.1.2011.5.14.32 |
| hwPriTagTransDownstream Indicates the priority-tag switching policy for downstream packets of VLAN priority service ports.
Options:
1. priorityTagged(1) -indicates the priority-tag of downstream packets… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.33 |
| hwEthTrafficSuppressDefaultTable | node | - | .1.3.6.1.4.1.2011.5.14.34 |
| hwPortAutoServiceParaTable Port auto service para table.
The index of this table is ifIndex. | table | - | .1.3.6.1.4.1.2011.5.14.35 |
| hwMacLimitActionSwitch If or not to shutdown the port when the number of MAC addresses of the port reaches an upper limit.
Options:
1. activate(1) -not to shutdown the port when the number of MA… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.36 |
| hwMacLimitSendEvent Indicates the priority-tag switching policy for downstream packets of VLAN priority service ports.
Options:
1. enabled(1) -not to send event when the number of MAC address… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.37 |
| hwDslamTrafficUpportMonitor | node | - | .1.3.6.1.4.1.2011.5.14.38 |
| hwMacAddressClearForOntPortDownSwitch Indicates the switch of clearing dynamic MAC address for service flows when the ONT port goes offline.
Options:
1. enabled(1) - Indicates that the switch of clearing dynamic MAC… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.39 |
| hwExtLanBoard | node | - | .1.3.6.1.4.1.2011.5.14.4 |
| hwDslamNonUnicastUpportMonitor | node | - | .1.3.6.1.4.1.2011.5.14.40 |
| hwPort10GLicControlObjects | node | - | .1.3.6.1.4.1.2011.5.14.41 |
| hwExtProtocolForceForwardingPolicyTable | node | - | .1.3.6.1.4.1.2011.5.14.42 |
| hwExtSrvFlow | node | - | .1.3.6.1.4.1.2011.5.14.5 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSlotPortMax Describes L2 global interface objects. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.1.1 |
| hwL2MacAgingMode Indicates the MAC address aging mode.
Options:
1. bidirectional(1) -indicates that the MAC address aging mode is bidirectional.
2. unidirectional(2) -indicates that the MAC addr… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.10 |
| hwBoardMacAddressLearningVlanConnectTable Used to enable or disable the MAC address learning function on S+C traffic streams.
The indexes of this table are hwFrameIndex and hwSlotIndex. | table | - | .1.3.6.1.4.1.2011.5.14.1.11 |
| hwMacAddressLearnPolicy Indicates the MAC address learning policy.
Options:
1. svlanBased(1) -indicates that the MAC address learning is based on SVLAN(service VLAN)
2. cvlanBased(2) -indicates that t… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.12 |
| hwMacAddressFlappingDetectionControl Indicates the switch for the MAC address flapping detection.
Options:
1. enabled(1) -Enable the MAC address flapping detection.
2. disabled(2) -Disable the MAC address flapping … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.13 |
| hwMacAddressFlappingDetectionPeriod Indicates the MAC address flapping detection period.
Range: 10-300
Unit: second
Default: 300 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.14 |
| hwMacAddressFlappingDetectionLowerThreshold Indicates the MAC address flapping detection lower threshold. The upper threshold
must be bigger than the lower threshold.
Range: 3-100
Default: 3 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.15 |
| hwMacAddressFlappingDetectionUpperThreshold Indicates the MAC address flapping detection upper threshold. The lower threshold
must be smaller than the upper threshold.
Range: 3-100
Default: 100 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.16 |
| hwFabricMacHashConflictAutoAdjust Indicates the switch for the MAC hash conflict auto adjust.
Options:
1. enabled(1) -indicates that the MAC address hash conflict auto adjust function is enabled.
2. disabled(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.17 |
| hwMacHashConflictRecordTable Indicates the line parameter configuration table of an MAC hash conflict.
It is used to query MAC hash congfig log.
This table mainly involves configuring parameters such as Mac… | table | - | .1.3.6.1.4.1.2011.5.14.1.18 |
| hwSwitchPortMax Max ports that this switch includes | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.1.2 |
| hwMacExpire Indicates the aging time of a dynamic MAC address.
Range: 1000-100000000.
Unit: cent seconds.
When this leaf is set to 0, it indicates that the MAC address does not age.
Default: … | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2011.5.14.1.3 |
| hwEthernetTable Indicates the line parameter configuration table of an ETH port.
It is used for setting the rate, duplex, auto-negotiation, MDI,
traffic control, Combo mode of an Ethernet port.… | table | - | .1.3.6.1.4.1.2011.5.14.1.4 |
| hwifVLANTrunkStatusTable Indicates the VLAN trunk feature.
The index of this table is hwifVLANTrunkIndex. | table | - | .1.3.6.1.4.1.2011.5.14.1.5 |
| hwSystemSwitchMode Options:
1. standbyPortUp(1) -Auto system switch mode (undo shutdown standby port) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.6 |
| hwFabricMacLearning Indicates the MAC address learning switch of the LSW chip of the control board.
Options:
1. enable(1) -indicates that the MAC address learning switch is enabled
2. disable(2) -i… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.1.7 |
| hwUNIMacLearningPriority Indicates the MAC learning priority of the user side in the mainboard.
Range: 0-3
Default: 0 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.8 |
| hwNNIMacLearningPriority Indicates the MAC learning priority of the network side in the mainboard.
Range: 0-3
Default: 3 | scalar | Integer32 | .1.3.6.1.4.1.2011.5.14.1.9 |