hwMacAddressFlappingDetectionUpperThreshold

HUAWEI-ETHERLIKE-EXT-MIB · .1.3.6.1.4.1.2011.5.14.1.16
MIB view Table view

Object

scalar r/w Integer32 
Indicates the MAC address flapping detection upper threshold. The lower threshold 
must be smaller than the upper threshold.
Range: 3-100
Default: 100

Context

MIB
HUAWEI-ETHERLIKE-EXT-MIB
OID
.1.3.6.1.4.1.2011.5.14.1.16
Type
scalar
Access
readwrite
Status
current
Parent
hwL2IfMibObject
Siblings
17

Syntax

Integer32

Values & Constraints

Object Constraints
range: 3-100

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwSlotPortMax
Describes L2 global interface objects.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.14.1.1
hwL2MacAgingMode
Indicates the MAC address aging mode. Options: 1. bidirectional(1) -indicates that the MAC address aging mode is bidirectional. 2. unidirectional(2) -indicates that the MAC addr…
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.10
hwBoardMacAddressLearningVlanConnectTable
Used to enable or disable the MAC address learning function on S+C traffic streams. The indexes of this table are hwFrameIndex and hwSlotIndex.
table-.1.3.6.1.4.1.2011.5.14.1.11
hwMacAddressLearnPolicy
Indicates the MAC address learning policy. Options: 1. svlanBased(1) -indicates that the MAC address learning is based on SVLAN(service VLAN) 2. cvlanBased(2) -indicates that t…
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.12
hwMacAddressFlappingDetectionControl
Indicates the switch for the MAC address flapping detection. Options: 1. enabled(1) -Enable the MAC address flapping detection. 2. disabled(2) -Disable the MAC address flapping …
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.13
hwMacAddressFlappingDetectionPeriod
Indicates the MAC address flapping detection period. Range: 10-300 Unit: second Default: 300
scalarInteger32.1.3.6.1.4.1.2011.5.14.1.14
hwMacAddressFlappingDetectionLowerThreshold
Indicates the MAC address flapping detection lower threshold. The upper threshold must be bigger than the lower threshold. Range: 3-100 Default: 3
scalarInteger32.1.3.6.1.4.1.2011.5.14.1.15
hwFabricMacHashConflictAutoAdjust
Indicates the switch for the MAC hash conflict auto adjust. Options: 1. enabled(1) -indicates that the MAC address hash conflict auto adjust function is enabled. 2. disabled(2) …
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.17
hwMacHashConflictRecordTable
Indicates the line parameter configuration table of an MAC hash conflict. It is used to query MAC hash congfig log. This table mainly involves configuring parameters such as Mac…
table-.1.3.6.1.4.1.2011.5.14.1.18
hwSwitchPortMax
Max ports that this switch includes
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.14.1.2
hwMacExpire
Indicates the aging time of a dynamic MAC address. Range: 1000-100000000. Unit: cent seconds. When this leaf is set to 0, it indicates that the MAC address does not age. Default: …
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2011.5.14.1.3
hwEthernetTable
Indicates the line parameter configuration table of an ETH port. It is used for setting the rate, duplex, auto-negotiation, MDI, traffic control, Combo mode of an Ethernet port.…
table-.1.3.6.1.4.1.2011.5.14.1.4
hwifVLANTrunkStatusTable
Indicates the VLAN trunk feature. The index of this table is hwifVLANTrunkIndex.
table-.1.3.6.1.4.1.2011.5.14.1.5
hwSystemSwitchMode
Options: 1. standbyPortUp(1) -Auto system switch mode (undo shutdown standby port) …
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.6
hwFabricMacLearning
Indicates the MAC address learning switch of the LSW chip of the control board. Options: 1. enable(1) -indicates that the MAC address learning switch is enabled 2. disable(2) -i…
scalarEnumeration.1.3.6.1.4.1.2011.5.14.1.7
hwUNIMacLearningPriority
Indicates the MAC learning priority of the user side in the mainboard. Range: 0-3 Default: 0
scalarInteger32.1.3.6.1.4.1.2011.5.14.1.8
hwNNIMacLearningPriority
Indicates the MAC learning priority of the network side in the mainboard. Range: 0-3 Default: 3
scalarInteger32.1.3.6.1.4.1.2011.5.14.1.9