hwIpTrafficParamChangeTrap
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.10.1.0.7
Object
notification
The trap generated when ip traffic profile created, deleted or modified.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.10.1.0.7- Type
- notification
- Status
- current
- Parent
- hwEthernetCommonTrapsOids
- Siblings
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpdslamDisplayLocationTrap Trap of display location query.
The trap that is generated when IP or MAC address changed. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.1 |
| hwSrvDelInfoTrap This trap is sent when a traffic stream is deleted. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.10 |
| hwSrvAttrChangedInfoTrap This trap is sent when the traffic stream attribute is modified. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.11 |
| hwSrvFlowBundleTrap The trap generated when service virtual port bundle created or deleted. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.12 |
| hwSrvFlowBatModifyInfoTrap The trap generated when service virtual port batch modifyed. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.13 |
| hwEthernetLoopbackTestTrap This trap will be sent when a ethernet loopback test finished successfully. The trap shows the result of the loopback test. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.14 |
| hwEthernetPortCfgChangeTrap The trap generated when ethernet port configuration modified. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.15 |
| hwEthernetPortAggCfgChangeTrap The trap generated when a link-aggregation group of Ethernet ports is created, modified or deleted.
If you run this command with all specified, the system reports only one trap wi… | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.16 |
| hwQryGlobalStatisticTrap Trap of one key mode of query flow quantity.
The trap that is generated when query global statistics. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.2 |
| hwBitsPortStatusChangeInfoTrap The trap generated when BITS port state changes | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.3 |
| hwBindBoardOprateResultInfoTrap The trap generated when bind board or undo bind board, The first two FrameIndex And SlotIndex is Masterborad, and the other is SlaveBoard | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.4 |
| hwPortSpeedTypeSwitchResultInfoTrap The trap generated when port speed type switched | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.5 |
| hwPortStateChangeInfoTrap This trap message is generated when the port status changes,
for example from up to down or from down to up. The parameter
information about the trap message describes the current… | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.6 |
| hwPortAutounloopSwitchInfoTrap A trap message is generated when the loopback on a port is canceled automatically. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.8 |
| hwSrvAddInfoTrap This trap is sent when a traffic stream is set up. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwConfigChangeIP The serial IP of configuration changes.
If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0.
If it is triggered by the SNMP user, the IP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.8.1.5 |
| hwIpTrafficParamChangeCause The change cause of IP traffic profile change trap.
Options:
1. addIpTrafficProfile(1) -add an IP traffic profile
2. modifyIpTrafficProfile(2) -modify the IP traffic profile
3.… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.22.18 |
| hwIpTrafficIndex Indicates the table index.
Range: 1-1024, -1
When creating an IP traffic profile, you can specify or not specify a profile index.
If you specify it to 4294967295, the system will… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.1 |
| hwIpTrafficName Indicates the traffic table name.
Each IP traffic profile has a unique name. When creating an IP traffic profile,
you can specify or not specify a profile name. If you do not sp… | column | OctetString | .1.3.6.1.4.1.2011.5.14.3.8.1.2 |
| hwIpTrafficCir Indicates the committed information rate (CIR).
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
CIR is a mandatory parameter. This parameter must be an integer multiple of 64.
If th… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.3 |
| hwIpTrafficCbs Indicates the committed burst size (CBS).
Range: -1, 0-1024000000 bytes.
Unit: bytes.
CBS is an optional parameter. If the parameter is not specified,
it can be obtained by form… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.4 |
| hwIpTrafficPir Indicates the peak information rate (PIR).
Range: -1, 64-10240000 kbit/s.
Unit: kbit/s.
PIR is an optional parameter. If the parameter is not specified,
it can be obtained throu… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.5 |
| hwIpTrafficPbs Indicates the peak burst size (PBS).
Range: -1, 2000-1024000000 bytes.
Unit: bytes.
PBS is an optional parameter.If the parameter is not specified,
it can be obtained by formula… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.6 |
| hwIpTrafficParamPriority Indicate the outer priority. Equal to the lower 16 bits of the value of hwIpTrafficPriority.
Range: 0-7 | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.22.19 |
| hwIpTrafficParamPriorityMappingPolicy Indicate the outer priority mapping policy. Equal to the higher 16 bits of the value of hwIpTrafficPriority.
Outer priority mapping policy:
0xFF (specified priority), 0xFE (prior… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.22.20 |
| hwIpTrafficPriorityPolicy Indicates the queue-joining trust priority policy of the IP traffic profile.
Options:
1. localPriority(1) -Indicates the queue-joining trust the priority set by IP … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.9 |
| hwIpTrafficCm Indicates the color-aware mode of the IP traffic profile.
Options:
1. colorBlind(1) -Indicates color blind mode.
2. colorAware(2) -Indicates color aware mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.7 |
| hwIpTrafficColorPolicy Indicates the color policy of the IP traffic profile.
Options:
1. dei(1) -Indicate the dei mode.
2. cos(2) -Indicate the CoS mode. | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.14 |
| hwIpTrafficFixBandWidth Indicates the fixed bandwidth to be allocated by the DBA. This parameter takes effect to the E2E service flow only on a GPON board.
Range: -1, 0-10240000 kbit/s.
Unit: kbit/s.
hwI… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.16 |
| hwIpTrafficDSCP Indicates the DSCP source.
The most significant 16 bits indicate the DSCP policy, and the least significant 16 bits indicate the DSCP value.
------------------------------… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.3.8.1.18 |
| hwIpTrafficDSCPMappingIndex Indicates the index of the referenced DSCP mapping profile.
When the hwIpTrafficDSCP is set to user-dscp(OxFE), the mapping profile index must be set to a valid profile.
When the… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.19 |
| hwIpTrafficDropPrecedence Indicates the packet discarding policy.
Options:
1. invalid(-1) -indicates that this function is not supported.
2. remarkedOuterPriority(0) -indicates that the internal pack… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.20 |
| hwIpTrafficColorDEI Indicates the color mark. It indicates whether and where the color is marked.
Options:
1. unmarkDei(0) -indicates that the color is not marked.
2. outerDei(1) -indicate… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.21 |
| hwIpTrafficColorSource Indicates the color source. It indicates where the color is marked.
Default: outerDei(1).
Options:
1. invalid(-1) -invalid value.
2. outerDei(1) -indicates that the col… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.3.8.1.22 |
| hwIpTrafficWrrWeightYellow Indicates the WRR weight for yellow color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.28 |
| hwIpTrafficWrrWeightGreen Indicates the WRR weight for green color packet.
Range: 0, 1-12
Default: 0
0 indicates WRR weight is auto calculated by PIR and CIR. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.3.8.1.29 |