hwSrvAddInfoTrap
HUAWEI-ETHERLIKE-EXT-MIB ·
.1.3.6.1.4.1.2011.5.14.10.1.0.9
Object
notification
This trap is sent when a traffic stream is set up.
Context
- MIB
- HUAWEI-ETHERLIKE-EXT-MIB
- OID
.1.3.6.1.4.1.2011.5.14.10.1.0.9- Type
- notification
- Status
- current
- Parent
- hwEthernetCommonTrapsOids
- Siblings
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIpdslamDisplayLocationTrap Trap of display location query.
The trap that is generated when IP or MAC address changed. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.1 |
| hwSrvDelInfoTrap This trap is sent when a traffic stream is deleted. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.10 |
| hwSrvAttrChangedInfoTrap This trap is sent when the traffic stream attribute is modified. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.11 |
| hwSrvFlowBundleTrap The trap generated when service virtual port bundle created or deleted. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.12 |
| hwSrvFlowBatModifyInfoTrap The trap generated when service virtual port batch modifyed. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.13 |
| hwEthernetLoopbackTestTrap This trap will be sent when a ethernet loopback test finished successfully. The trap shows the result of the loopback test. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.14 |
| hwEthernetPortCfgChangeTrap The trap generated when ethernet port configuration modified. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.15 |
| hwEthernetPortAggCfgChangeTrap The trap generated when a link-aggregation group of Ethernet ports is created, modified or deleted.
If you run this command with all specified, the system reports only one trap wi… | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.16 |
| hwQryGlobalStatisticTrap Trap of one key mode of query flow quantity.
The trap that is generated when query global statistics. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.2 |
| hwBitsPortStatusChangeInfoTrap The trap generated when BITS port state changes | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.3 |
| hwBindBoardOprateResultInfoTrap The trap generated when bind board or undo bind board, The first two FrameIndex And SlotIndex is Masterborad, and the other is SlaveBoard | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.4 |
| hwPortSpeedTypeSwitchResultInfoTrap The trap generated when port speed type switched | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.5 |
| hwPortStateChangeInfoTrap This trap message is generated when the port status changes,
for example from up to down or from down to up. The parameter
information about the trap message describes the current… | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.6 |
| hwIpTrafficParamChangeTrap The trap generated when ip traffic profile created, deleted or modified. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.7 |
| hwPortAutounloopSwitchInfoTrap A trap message is generated when the loopback on a port is canceled automatically. | notification | - | .1.3.6.1.4.1.2011.5.14.10.1.0.8 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwConfigChangeIP The serial IP of configuration changes.
If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0.
If it is triggered by the SNMP user, the IP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.8.1.5 |
| hwSrvOperType The operation type of the traffic stream.
Options:
1. add(1) -means to create a traffic stream.
2. modify(2) -means to modify a traffic stream (this operation is not supported… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.14.10.0.1.6 |
| hwExtSrvFlowIndex Indicates the service flow index, a unique value to identify a service flow.
To create a service flow, this leaf is optional. If a valid free value is specified,
the value will b… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.1 |
| hwExtSrvFlowMultiServiceType Indicates the traffic classification criteria on the port or logical port for user services.
Options:
1. byUserVlan(1) -indicates traffic classification by C-VLAN.
2. byEnca… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.11 |
| hwExtSrvFlowMultiServiceUserPara Indicates the traffic classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowMultiServiceType:
If the value … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.12 |
| hwExtSrvFlowPara1 The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf indicates the PVC connect ID.
If the value of hwExtSrvF… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.2 |
| hwExtSrvFlowPara2 The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf is reserved.
If the value of hwExtSrvFlowParaType is se… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.3 |
| hwExtSrvFlowPara3 The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, this leaf is reserved.
If the value of hwExtSrvFlowParaType is se… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.4 |
| hwExtSrvFlowPara4 The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 7, or 16, this leaf is reserved.
If the value of hwExtSrvFlowP… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.5 |
| hwExtSrvFlowPara5 The meaning is variable with the value of hwExtSrvFlowParaType:
If the value of hwExtSrvFlowParaType is set to 1, 2, 3, 5, 6, 7, 8, 15, or 16, this leaf is reserved.
If the value … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.6 |
| hwExtSrvFlowParaType The mode of create flow.
Options:
1. pvc(1) -indicates that PVC is the logical port for service flow,
applicable for xDSL ATM mode access and A… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.7 |
| hwExtSrvFlowVlanid Service VLAN ID, identifying the global VLAN for switch-oriented service flow. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.5.2.1.8 |
| hwExtSrvFlowReceiveTrafficDescrIndex Indicates the index of the IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user
port (for terminal users, it is the Rx dir… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.9 |
| hwExtSrvFlowTransmitTrafficDescrIndex Indicates the index of the IP traffic table (hwIpTrafficParamTable) applying to
the service flow in the inbound direction of the user port (for terminal users,
it is the Tx dire… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.10 |
| hwExtSrvFlowAdminStatus Indicates the administrative status of the service flow.
Options:
1. up(1) -indicates that traffic is allowed to pass.
2. down(2) -indicates that traffic is blocked.
Default:… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.13 |
| hwExtSrvFlowSimulationServiceType Indicates the type of a simulation service.
Options:
1. invalid(-1) -indicates a connection-oriented service flow, only for read
2. default(0) -indicates a switch-oriented servi… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.19 |
| hwExtSrvFlowInboundTrafficTableName Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the inbound direction of the user port. | column | OctetString | .1.3.6.1.4.1.2011.5.14.5.2.1.22 |
| hwExtSrvFlowOutboundTrafficTableName Indicates the name of IP traffic table (hwIpTrafficParamTable)
applying to the service flow in the outbound direction of the user port. | column | OctetString | .1.3.6.1.4.1.2011.5.14.5.2.1.21 |
| hwExtSrvFlowInnerVlanId Multi-Service up inner vlan id,
the bound of parameter is 1 to 4095. | column | Integer32 | .1.3.6.1.4.1.2011.5.14.5.2.1.16 |
| hwExtSrvFlowSourceType Indicates the source end-point type of a service flow.
Options:
1. root(1) -indicates that the source end-point is a switch domain.
A switch domain for service flow … | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.29 |
| hwExtSrvFlowDestinationType Indicates the destination end-point type of a service flow.
Options:
1. invalid(-1) -indicates invalid.
2. leaf(2) -indicates that the source end-point is a port or logical… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.30 |
| hwExtSrvFlowSourceParaType The value and meaning of the parameter:
Options:
1. invalid(-1) -indicates invalid.
2. eth(2) -indicates that the source end-point of the service flow is based on Ethernet p… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.31 |
| hwExtSrvFlowSourcePara1 The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the shelf ID.
If the value of h… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.32 |
| hwExtSrvFlowSourcePara2 The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the slot ID.
If the value of hw… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.33 |
| hwExtSrvFlowSourcePara3 The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf indicates the port ID.
If the value of hw… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.34 |
| hwExtSrvFlowSourcePara4 The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf is reserved and the returned value is -1.
I… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.35 |
| hwExtSrvFlowSourcePara5 The meaning is variable with the value of hwExtSrvFlowSourceParaType:
If the value of hwExtSrvFlowSourceParaType is set to 2, this leaf is reserved and the returned value is -1.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.36 |
| hwExtSrvFlowSourceMultiServiceType Indicates the traffic classification criteria on the port or logical port.
For the source end-point.
Options:
1. invalid(-1) -invalid
2. byUserVlan(1) -indicates traffic cl… | column | Enumeration | .1.3.6.1.4.1.2011.5.14.5.2.1.37 |
| hwExtSrvFlowSourceMultiServiceUserPara The flow classification parameter on the port or logical port for user service.
The meaning is variable with the value of hwExtSrvFlowSourceMultiServiceType:
If the hwExtSrvFlowS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.38 |
| hwExtSrvFlowSourceInnerVlanId Multi-Service up inner vlan id, the bound of parameter is 1 to 4095.
If a service flow is not connection-oriented, or the value of this leaf is not set,
the returned value of this… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.5.2.1.39 |
| hwExtSrvFlowBundleIndex Indicates the service flow bundle index.
A service flow bundle is an entity including certain service flows from
one L3 access user such as residential gateway device. Traffic as… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.14.5.2.1.27 |
| hwExtSrvFlowBundleMemberSortPara Indicates the corresponding key value of a service flow in service flow bundle.
Now service flow bundle type must be byPbit(1), indicating that the key para is CoS.
The range of… | column | Integer32 | .1.3.6.1.4.1.2011.5.14.5.2.1.28 |