hwADSLLineProfChangeTrap
HUAWEI-ADSL-EXT-MIB ·
.1.3.6.1.4.1.2011.6.31.2.1.0.7
Object
notification
ADSL line profile change trap. This trap message is generated when the ADSL line profile changed.
Context
- MIB
- HUAWEI-ADSL-EXT-MIB
- OID
.1.3.6.1.4.1.2011.6.31.2.1.0.7- Type
- notification
- Status
- current
- Parent
- hwAdslCommonTrapsPrefix
- Siblings
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAdslPortActRateMonitorInfoTrap If ADSL act rate is lower than threshold,
hwTrapType is 1. Otherwise, hwTrapType is 2.
This trap message is generated when the ADSL port rate fails to meet the requirement. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.1 |
| hwAdslPortRateChangeInfoTrap ADSL act rate is change trap.
This trap message is generated when the ADSL port rate changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.2 |
| hwAdslDynamicCollectInfoTrap XDSL dynamic collect trap.
This trap message is generated when xDSL port Dynamic information collect. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.3 |
| hwAdslDeltOperResultInfoTrap ADSL delt trap.
This trap message is generated when the ADSL port delt test finish. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.4 |
| hwAdslPortStatusChangeInfoTrap ADSL port status change trap.
This trap message is generated when the ADSL port status changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.5 |
| hwAdslSeltStartResultTrap ADSL selt test start trap.
This trap message is generated when the ADSL port selt test finish. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.6 |
| hwADSLAlarmProfChangeTrap ADSL alarm profile change trap.
This trap message is generated when the ADSL alarm profile changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.8 |
| hwADSLExtLineProfChangeTrap ADSL extended line profile change trap.
This trap message is generated when the ADSL extended line profile changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwConfigChangeIP The serial IP of configuration changes.
If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0.
If it is triggered by the SNMP user, the IP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.8.1.5 |
| hwADSLProfOperType ADSL profile operate type.
Options:
1.add(1) - Add an ADSL profile
2.modify(2) - Modify an ADSL profile
3.delete(3) - Delete an ADSL profile | scalar | Enumeration | .1.3.6.1.4.1.2011.6.31.3.4 |
| ADSL-LINE-MIBadslLineConfProfileName This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user spec… | column | OctetString | .1.3.6.1.2.1.10.94.1.1.14.1.1 |
| ADSL-LINE-MIBadslAtucConfRateMode Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information. | column | Enumeration | .1.3.6.1.2.1.10.94.1.1.14.1.2 |
| ADSL-LINE-EXT-MIBadslConfProfileLineType This object is used to configure the ADSL physical
line mode. It has following valid values:
noChannel(1), when no channels exist.
fastOnly(2), when only fast chan… | column | Enumeration | .1.3.6.1.2.1.10.94.3.1.22.1.1 |
| ADSL-LINE-MIBadslAtucConfTargetSnrMgn Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.4 |
| ADSL-LINE-MIBadslAtucConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.5 |
| ADSL-LINE-MIBadslAtucConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.6 |
| ADSL-LINE-MIBadslAtucConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode… | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.7 |
| ADSL-LINE-MIBadslAtucConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is n… | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.8 |
| ADSL-LINE-MIBadslAtucConfMinUpshiftTime Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.9 |
| ADSL-LINE-MIBadslAtucConfMinDownshiftTime Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.10 |
| ADSL-LINE-MIBadslAtucChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for
ATUC receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.11 |
| ADSL-LINE-MIBadslAtucChanConfInterleaveMinTxRate Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and see
ATUR transmit rate for receive rate… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.12 |
| ADSL-LINE-MIBadslAtucChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and see ATUR transmit rate for
ATUC receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.13 |
| ADSL-LINE-MIBadslAtucChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and ATUR transmit
rate for ATUC receive rat… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.14 |
| ADSL-LINE-MIBadslAtucChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
sub… | column | milli-seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.15 |
| ADSL-LINE-MIBadslAturConfTargetSnrMgn Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.18 |
| ADSL-LINE-MIBadslAturConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.19 |
| ADSL-LINE-MIBadslAturConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.20 |
| ADSL-LINE-MIBadslAturConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.21 |
| ADSL-LINE-MIBadslAturConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.22 |
| ADSL-LINE-MIBadslAturConfMinUpshiftTime Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.23 |
| ADSL-LINE-MIBadslAturConfMinDownshiftTime Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.24 |
| ADSL-LINE-MIBadslAturChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.25 |
| ADSL-LINE-MIBadslAturChanConfInterleaveMinTxRate Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and ATUC transmit rate
for ATUR receive rat… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.26 |
| ADSL-LINE-MIBadslAturChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.27 |
| ADSL-LINE-MIBadslAturChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and see
ATUC transmit rate for ATUR receive… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.28 |
| ADSL-LINE-MIBadslAturChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
sub… | column | milli-seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.29 |
| HUAWEI-ADSL-MIBhwAdslAtucConfDownBitSwap | - | - | - |
| HUAWEI-ADSL-MIBhwAdslAtucConfUpBitSwap | - | - | - |
| HUAWEI-ADSL-MIBhwAdslTrellionsModeEnable | - | - | - |
| hwAdslTransmissionModeCfg Indicates the transmission mode of this channel.
Options:
1. all(1) - All (G992.1, G992.2, T1.413)(Default)
2. fullRate(2) - Full rate(G992.1 or T1.413)
3. gliteO… | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.4.1.4 |
| ADSL-LINE-EXT-MIBadslConfProfileLineType This object is used to configure the ADSL physical
line mode. It has following valid values:
noChannel(1), when no channels exist.
fastOnly(2), when only fast chan… | column | Enumeration | .1.3.6.1.2.1.10.94.3.1.22.1.1 |