hwADSLAlarmProfChangeTrap
HUAWEI-ADSL-EXT-MIB ·
.1.3.6.1.4.1.2011.6.31.2.1.0.8
Object
notification
ADSL alarm profile change trap. This trap message is generated when the ADSL alarm profile changed.
Context
- MIB
- HUAWEI-ADSL-EXT-MIB
- OID
.1.3.6.1.4.1.2011.6.31.2.1.0.8- Type
- notification
- Status
- current
- Parent
- hwAdslCommonTrapsPrefix
- Siblings
- 8
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAdslPortActRateMonitorInfoTrap If ADSL act rate is lower than threshold,
hwTrapType is 1. Otherwise, hwTrapType is 2.
This trap message is generated when the ADSL port rate fails to meet the requirement. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.1 |
| hwAdslPortRateChangeInfoTrap ADSL act rate is change trap.
This trap message is generated when the ADSL port rate changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.2 |
| hwAdslDynamicCollectInfoTrap XDSL dynamic collect trap.
This trap message is generated when xDSL port Dynamic information collect. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.3 |
| hwAdslDeltOperResultInfoTrap ADSL delt trap.
This trap message is generated when the ADSL port delt test finish. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.4 |
| hwAdslPortStatusChangeInfoTrap ADSL port status change trap.
This trap message is generated when the ADSL port status changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.5 |
| hwAdslSeltStartResultTrap ADSL selt test start trap.
This trap message is generated when the ADSL port selt test finish. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.6 |
| hwADSLLineProfChangeTrap ADSL line profile change trap.
This trap message is generated when the ADSL line profile changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.7 |
| hwADSLExtLineProfChangeTrap ADSL extended line profile change trap.
This trap message is generated when the ADSL extended line profile changed. | notification | - | .1.3.6.1.4.1.2011.6.31.2.1.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| HUAWEI-DEVICE-MIBhwConfigChangeIP The serial IP of configuration changes.
If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0.
If it is triggered by the SNMP user, the IP a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.3.8.1.5 |
| hwADSLProfOperType ADSL profile operate type.
Options:
1.add(1) - Add an ADSL profile
2.modify(2) - Modify an ADSL profile
3.delete(3) - Delete an ADSL profile | scalar | Enumeration | .1.3.6.1.4.1.2011.6.31.3.4 |
| ADSL-LINE-MIBadslLineAlarmConfProfileName This object is used by the line alarm configuration
table in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is use… | column | OctetString | .1.3.6.1.2.1.10.94.1.1.15.1.1 |
| ADSL-LINE-MIBadslAtucThresh15MinLofs The number of Loss of Frame Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtu… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.2 |
| ADSL-LINE-MIBadslAtucThresh15MinLoss The number of Loss of Signal Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAt… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.3 |
| ADSL-LINE-MIBadslAtucThresh15MinLols The number of Loss of Link Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtuc… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.4 |
| ADSL-LINE-MIBadslAtucThresh15MinLprs The number of Loss of Power Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtu… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.5 |
| ADSL-LINE-MIBadslAtucThresh15MinESs The number of Errored Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfE… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.6 |
| ADSL-LINE-MIBadslAtucThreshFastRateUp Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this obje… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.7 |
| ADSL-LINE-MIBadslAtucThreshInterleaveRateUp Applies to `Interleave' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus … | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.8 |
| ADSL-LINE-MIBadslAtucThreshFastRateDown Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this ob… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.9 |
| ADSL-LINE-MIBadslAtucThreshInterleaveRateDown Applies to `Interleave' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
t… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.10 |
| ADSL-LINE-MIBadslAtucInitFailureTrapEnable Enables and disables the InitFailureTrap. This
object is defaulted disable(2). | column | Enumeration | .1.3.6.1.2.1.10.94.1.1.15.1.11 |
| ADSL-LINE-MIBadslAturThresh15MinLofs The number of Loss of Frame Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtu… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.12 |
| ADSL-LINE-MIBadslAturThresh15MinLoss The number of Loss of Signal Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAt… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.13 |
| ADSL-LINE-MIBadslAturThresh15MinLprs The number of Loss of Power Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtu… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.14 |
| ADSL-LINE-MIBadslAturThresh15MinESs The number of Errored Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send a… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.15.1.15 |
| ADSL-LINE-MIBadslAturThreshFastRateUp Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this obj… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.16 |
| ADSL-LINE-MIBadslAturThreshInterleaveRateUp Applies to `Interleave' channels only.
configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
th… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.17 |
| ADSL-LINE-MIBadslAturThreshFastRateDown Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this ob… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.18 |
| ADSL-LINE-MIBadslAturThreshInterleaveRateDown Applies to `Interleave' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
t… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.15.1.19 |
| ADSL-LINE-MIBadslLineAlarmConfProfileRowStatus This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.94.1.1.15.1.20 |
| ADSL-LINE-EXT-MIBadslAtucThreshold15MinFailedFastR The first time the value of the corresponding
instance of adslAtucPerfCurr15MinFailedFastR
reaches or exceeds this value within a given
15-minute performance data collection perio… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.3.1.23.1.1 |
| ADSL-LINE-EXT-MIBadslAtucThreshold15MinSesL The first time the value of the corresponding
instance of adslAtucPerf15MinSesL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslA… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.3.1.23.1.2 |
| ADSL-LINE-EXT-MIBadslAtucThreshold15MinUasL The first time the value of the corresponding
instance of adslAtucPerf15MinUasL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslA… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.3.1.23.1.3 |
| ADSL-LINE-EXT-MIBadslAturThreshold15MinSesL The first time the value of the corresponding
instance of adslAturPerf15MinSesL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
adslA… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.3.1.23.1.4 |
| ADSL-LINE-EXT-MIBadslAturThreshold15MinUasL The first time the value of the corresponding
instance of adslAturPerf15MinUasL reaches or
exceeds this value within a given 15-minute
performance data collection period, an
… | column | seconds Integer32 | .1.3.6.1.2.1.10.94.3.1.23.1.5 |
| hwadslLineAlarmConfProfileDyingGaspCfg This object enables/disables the report of LOSS-OF-POWER
alarm in an ADSL line. This object is defaulted enable(1).
Options:
1. enable(1) - The report of LOSS-OF-POWER alarm in a… | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.21.1.1 |
| hwadslLineAlarmConfProfXturThresh15MinLeftrs A threshold for the hwAdslAturPerfCurr15MLeftrs counter,
The value 0 means that no threshold is specified for the
associated counter.
Unit: seconds | column | seconds HC-PerfHist-TC-MIBHCPerfIntervalThreshold | .1.3.6.1.4.1.2011.6.31.1.21.1.2 |
| hwAdslLineAlarmConfProfileActiveFailAlarmSwitch This object enable/disable the active fail alarm switch.
Options:
1. enable(1) - The active fail alarm switch is enabled
2. disable(2) - The active fail alarm switch is disabled | column | Enumeration | .1.3.6.1.4.1.2011.6.31.1.21.1.3 |