eoPowerNameplate
ENERGY-OBJECT-MIB ·
.1.3.6.1.2.1.229.1.2.1.2
Object
This object indicates the rated maximum consumption for
the fully populated Energy Object. The nameplate power
requirements are the maximum power numbers given in SI
watts and, in almost all cases, are well above the
expected operational consumption. Nameplate power is
widely used for power provisioning. This value is
specified in either units of watts or voltage and
current. The units are therefore SI watts or equivalent
Volt-Amperes with the magnitude (milliwatts, kilowatts,
etc.) indicated separately in eoPowerUnitMultiplier.
Context
- MIB
- ENERGY-OBJECT-MIB
- OID
.1.3.6.1.2.1.229.1.2.1.2- Type
- column
- Access
- readonly
- Status
- current
- Units
- watts
- Parent
- eoPowerEntry
- Table
- eoPowerTable
- Siblings
- 9
Syntax
watts SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoPower This object indicates the power measured for the Energy
Object. For alternating current, this value is obtained
as an average over fixed number of AC cycles. This value
is speci… | column | watts SNMPv2-SMIInteger32 | .1.3.6.1.2.1.229.1.2.1.1 |
| eoPowerStateEnterReason This string object describes the reason for the
eoPowerAdminState transition. Alternatively, this string
may contain with the entity that configured this Energy
Ob… | column | RMON-MIBOwnerString | .1.3.6.1.2.1.229.1.2.1.10 |
| eoPowerUnitMultiplier The magnitude of watts for the usage value in eoPower
and eoPowerNameplate. | column | UnitMultiplier | .1.3.6.1.2.1.229.1.2.1.3 |
| eoPowerAccuracy This object indicates a percentage value, in hundredths of a
percent, representing the assumed accuracy of the usage
reported by eoPower. For example, the value 1010 means
the re… | column | hundredths of percent Integer32 | .1.3.6.1.2.1.229.1.2.1.4 |
| eoPowerMeasurementCaliber This object specifies how the usage value reported by
eoPower was obtained:
- unavailable(1): Indicates that the usage is not
available. In such a case, the eoPowe… | column | Enumeration | .1.3.6.1.2.1.229.1.2.1.5 |
| eoPowerCurrentType This object indicates whether the eoPower for the
Energy Object reports alternating current 'ac', direct
current 'dc', or that the current type is unknown. | column | Enumeration | .1.3.6.1.2.1.229.1.2.1.6 |
| eoPowerMeasurementLocal This object indicates the source of power measurement
and can be useful when modeling the power usage of
attached devices. The power measurement can be performed
b… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.229.1.2.1.7 |
| eoPowerAdminState This object specifies the desired Power State and the
Power State Set for the Energy Object. Note that other(0)
is not a Power State Set and unknown(255) is not a Power
State as … | column | IANAPowerStateSet-MIBPowerStateSet | .1.3.6.1.2.1.229.1.2.1.8 |
| eoPowerOperState This object specifies the current operational Power
State and the Power State Set for the Energy Object.
other(0) is not a Power State Set and unknown(255) is not
a Power State as… | column | IANAPowerStateSet-MIBPowerStateSet | .1.3.6.1.2.1.229.1.2.1.9 |