eoPowerMeasurementCaliber
ENERGY-OBJECT-MIB ·
.1.3.6.1.2.1.229.1.2.1.5
Object
column
Enumeration
This object specifies how the usage value reported by
eoPower was obtained:
- unavailable(1): Indicates that the usage is not
available. In such a case, the eoPower value must be 0
for devices that cannot measure or report power this
option can be used.
- unknown(2): Indicates that the way the usage was
determined is unknown. In some cases, entities report
aggregate power on behalf of another device. In such
cases it is not known whether the usage reported is
actual, estimated, or static.
- actual(3): Indicates that the reported usage was
measured by the entity through some hardware or direct
physical means. The usage data reported is not estimated
or static but is the measured consumption rate.
- estimated(4): Indicates that the usage was not
determined by physical measurement. The value is a
derivation based upon the device type, state, and/or
current utilization using some algorithm or heuristic. It
is presumed that the entity's state and current
configuration were used to compute the value.
- static(5): Indicates that the usage was not determined
by physical measurement, algorithm, or derivation. The
usage was reported based upon external tables,
specifications, and/or model information. For example, a
PC Model X draws 200W, while a PC Model Y draws 210W.
Context
- MIB
- ENERGY-OBJECT-MIB
- OID
.1.3.6.1.2.1.229.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eoPowerEntry
- Table
- eoPowerTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unavailable |
2 | unknown |
3 | actual |
4 | estimated |
5 | static |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoPower This object indicates the power measured for the Energy
Object. For alternating current, this value is obtained
as an average over fixed number of AC cycles. This value
is speci… | column | watts SNMPv2-SMIInteger32 | .1.3.6.1.2.1.229.1.2.1.1 |
| eoPowerStateEnterReason This string object describes the reason for the
eoPowerAdminState transition. Alternatively, this string
may contain with the entity that configured this Energy
Ob… | column | RMON-MIBOwnerString | .1.3.6.1.2.1.229.1.2.1.10 |
| eoPowerNameplate This object indicates the rated maximum consumption for
the fully populated Energy Object. The nameplate power
requirements are the maximum power numbers given in SI
watts and, i… | column | watts SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.229.1.2.1.2 |
| eoPowerUnitMultiplier The magnitude of watts for the usage value in eoPower
and eoPowerNameplate. | column | UnitMultiplier | .1.3.6.1.2.1.229.1.2.1.3 |
| eoPowerAccuracy This object indicates a percentage value, in hundredths of a
percent, representing the assumed accuracy of the usage
reported by eoPower. For example, the value 1010 means
the re… | column | hundredths of percent Integer32 | .1.3.6.1.2.1.229.1.2.1.4 |
| eoPowerCurrentType This object indicates whether the eoPower for the
Energy Object reports alternating current 'ac', direct
current 'dc', or that the current type is unknown. | column | Enumeration | .1.3.6.1.2.1.229.1.2.1.6 |
| eoPowerMeasurementLocal This object indicates the source of power measurement
and can be useful when modeling the power usage of
attached devices. The power measurement can be performed
b… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.229.1.2.1.7 |
| eoPowerAdminState This object specifies the desired Power State and the
Power State Set for the Energy Object. Note that other(0)
is not a Power State Set and unknown(255) is not a Power
State as … | column | IANAPowerStateSet-MIBPowerStateSet | .1.3.6.1.2.1.229.1.2.1.8 |
| eoPowerOperState This object specifies the current operational Power
State and the Power State Set for the Energy Object.
other(0) is not a Power State Set and unknown(255) is not
a Power State as… | column | IANAPowerStateSet-MIBPowerStateSet | .1.3.6.1.2.1.229.1.2.1.9 |