efmCuPmeLineAtnCrossing
EFM-CU-MIB ·
.1.3.6.1.2.1.167.1.2.0.1
Object
notification
This notification indicates that the loop attenuation
threshold (as per the efmCuPmeThreshLineAtn
value) has been reached/exceeded for the 2BASE-TL/10PASS-TS
PME. This notification MAY be sent on the crossing event in
both directions: from normal to exceeded and from exceeded
to normal.
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and the notification,
is implemented to prevent intermittent notifications from
being sent.
Generation of this notification is controlled by the
efmCuPmeLineAtnCrossingEnable object.
Context
- MIB
- EFM-CU-MIB
- OID
.1.3.6.1.2.1.167.1.2.0.1- Type
- notification
- Status
- current
- Parent
- efmCuPmeNotifications
- Siblings
- 4
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPmeSnrMgnCrossing This notification indicates that the SNR margin threshold
(as per the efmCuPmeThreshSnrMgn value) has been
reached/exceeded for the 2BASE-TL/10PASS-TS PME.
This notification MAY b… | notification | - | .1.3.6.1.2.1.167.1.2.0.2 |
| efmCuPmeDeviceFault This notification indicates that a fault in the PME has been
detected by a vendor-specific diagnostic or a self-test.
Generation of this notification is controlled by t… | notification | - | .1.3.6.1.2.1.167.1.2.0.3 |
| efmCuPmeConfigInitFailure This notification indicates that PME initialization has
failed, due to inability of the PME link to achieve the
requested configuration profile.
Generation o… | notification | - | .1.3.6.1.2.1.167.1.2.0.4 |
| efmCuPmeProtocolInitFailure This notification indicates that the peer PME was using
an incompatible protocol during initialization.
Generation of this notification is controlled by the
efmCuPmePro… | notification | - | .1.3.6.1.2.1.167.1.2.0.5 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| efmCuPmeLineAtn The current Line Attenuation in dB as perceived by the local
PME.
The value of 65535 is returned when the PME is Down or
Initializing.
If a Clause 45… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.3.1.7 |
| efmCuPmeThreshLineAtn Desired Line Attenuation threshold for the 2B/10P PME.
This object configures the line attenuation alarm threshold.
When the current value of Line Attenuation reaches or
exceeds t… | column | dB Integer32 | .1.3.6.1.2.1.167.1.2.1.1.4 |