docsIfMCmtsEqamDownstreamUdpPortMapping
DOCS-IF-M-CMTS-MIB ·
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9
Object
column
INET-ADDRESS-MIBInetPortNumber
The UDP Port within a L2TPv3 Session PDU the EQAM uses to map DEPI flows to the EQAM channels associated to this table entry. When the EQAM device does not support UDP port mapping to DEPI flows, this object reports the value 1701 (the default UDP port when M-CMTS Initiates a DEPI session with L2TPv3 header over UDP).
Context
- MIB
- DOCS-IF-M-CMTS-MIB
- OID
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- docsIfMCmtsEqamDownstreamEntry
- Table
- docsIfMCmtsEqamDownstreamTable
- Siblings
- 8
Syntax
INET-ADDRESS-MIBInetPortNumber
- Source
- INET-ADDRESS-MIBInetPortNumber
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfMCmtsEqamDownstreamTSID Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 |
| docsIfMCmtsEqamDownstreamPhyDependencies The summary of the M-CMTS Downstream Interface
dependencies based on the constraints of
docsIfMCmtsEqamGroupDependencyEntry.
A BIT position set to '1' indicates the PHY parameter… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 |
| docsIfMCmtsEqamDownstreamDevicePhyParamLock Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 |
| docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock Administrative configuration of lock bits for EQAM
channels PHY parameters.
A BIT set of this object is meaningful when the same BIT
set in docsIfMCmtsEqamDownstrea… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 |
| docsIfMCmtsEqamDownstreamAllocationType Indicates the mechanisms authorized to reserve and control
this M-CMTS Downstream interface.
When configured to 'docsisOnly' indicates that it can be
allocated only to serve data… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 |
| docsIfMCmtsEqamDownstreamAllocationStatus Indicates the service(s) the M-CMTS Downstream Interface
is allocated for.
'other' BIT set to '1' indicates the resource is currently
allocated to DOCSIS and/or Video services by … | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 |
| docsIfMCmtsEqamDownstreamAllocationTimeout Indicates the number of seconds the EQAM device waits
before advertising the QAM channel resource is idle and/or
accepting a session establishment from a different
control plane … | column | seconds Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 |
| docsIfMCmtsEqamDownstreamDRRPAdvertizing Indicates when a QAM channel resource should be advertised
via DRRP (DOCSIS Resource Registration Protocol) to an Edge
Resource Manager (ERM).
This Object is useful… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 |