docsIfMCmtsEqamDownstreamAllocationTimeout
DOCS-IF-M-CMTS-MIB ·
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7
Object
column
r/w
seconds Unsigned32
Indicates the number of seconds the EQAM device waits
before advertising the QAM channel resource is idle and/or
accepting a session establishment from a different
control plane to the previous one. As a side effect,
the entry in docsIfMCmtsDepiSessionConfigTable is aged out
and destroyed only after the expiration of this reservation
timeout. A value zero makes the resource available
immediately for allocation to others.
Note that not explicit indefinite timeout needs to be
defined to indicate exclusive allocation to a requester.
The EQAM device can support this condition for example by
configuring restricted access to certain Resource
Allocation control plane to a particular IP host in the
form of source IP or authentication mechanisms.
Context
- MIB
- DOCS-IF-M-CMTS-MIB
- OID
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- docsIfMCmtsEqamDownstreamEntry
- Table
- docsIfMCmtsEqamDownstreamTable
- Siblings
- 8
Syntax
seconds Unsigned32
Values & Constraints
Object Constraints
range: 0-120
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfMCmtsEqamDownstreamTSID Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 |
| docsIfMCmtsEqamDownstreamPhyDependencies The summary of the M-CMTS Downstream Interface
dependencies based on the constraints of
docsIfMCmtsEqamGroupDependencyEntry.
A BIT position set to '1' indicates the PHY parameter… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 |
| docsIfMCmtsEqamDownstreamDevicePhyParamLock Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 |
| docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock Administrative configuration of lock bits for EQAM
channels PHY parameters.
A BIT set of this object is meaningful when the same BIT
set in docsIfMCmtsEqamDownstrea… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 |
| docsIfMCmtsEqamDownstreamAllocationType Indicates the mechanisms authorized to reserve and control
this M-CMTS Downstream interface.
When configured to 'docsisOnly' indicates that it can be
allocated only to serve data… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 |
| docsIfMCmtsEqamDownstreamAllocationStatus Indicates the service(s) the M-CMTS Downstream Interface
is allocated for.
'other' BIT set to '1' indicates the resource is currently
allocated to DOCSIS and/or Video services by … | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 |
| docsIfMCmtsEqamDownstreamDRRPAdvertizing Indicates when a QAM channel resource should be advertised
via DRRP (DOCSIS Resource Registration Protocol) to an Edge
Resource Manager (ERM).
This Object is useful… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8 |
| docsIfMCmtsEqamDownstreamUdpPortMapping The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mappi… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9 |