docsIfMCmtsEqamDownstreamDRRPAdvertizing
DOCS-IF-M-CMTS-MIB ·
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8
Object
Indicates when a QAM channel resource should be advertised
via DRRP (DOCSIS Resource Registration Protocol) to an Edge
Resource Manager (ERM).
This Object is useful when a device is allocated for
instance to DOCSIS only by a static reservation
(docsIfMCmtsEqamDownstreamAllocationType 'docsisOnly').
It means an Edge Resource Manager won't have this QAM
channel resource available allocate upon requests from
different entities.
Note that DRRP currently does not signal EQAM resources
as reserved for a particular service.
The MIB objects docsIfMCmtsEqamDownstreamDRRPAdvertizing
and docsIfMCmtsEqamDownstreamAllocationType are used
primarily to statically reserve QAM channels and prevent
its allocation by dynamic means such ERM or some other
existing mechanisms. Therefore, caution is needed when
setting this object to 'true' since the allocation Type
docsIfMCmtsEqamDownstreamAllocationType is not known by
ERMs with DRRP support.
Context
- MIB
- DOCS-IF-M-CMTS-MIB
- OID
.1.3.6.1.4.1.4491.2.1.6.1.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsIfMCmtsEqamDownstreamEntry
- Table
- docsIfMCmtsEqamDownstreamTable
- Siblings
- 8
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIfMCmtsEqamDownstreamTSID Represents the TSID value for the QAM channel of this
M-CMTS Downstream Interface.
The value '0' indicates no TSID is being configured in the
EQAM device for this interface entry. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.1 |
| docsIfMCmtsEqamDownstreamPhyDependencies The summary of the M-CMTS Downstream Interface
dependencies based on the constraints of
docsIfMCmtsEqamGroupDependencyEntry.
A BIT position set to '1' indicates the PHY parameter… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.2 |
| docsIfMCmtsEqamDownstreamDevicePhyParamLock Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.3 |
| docsIfMCmtsEqamDownstreamDeviceConfigPhyParamLock Administrative configuration of lock bits for EQAM
channels PHY parameters.
A BIT set of this object is meaningful when the same BIT
set in docsIfMCmtsEqamDownstrea… | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.4 |
| docsIfMCmtsEqamDownstreamAllocationType Indicates the mechanisms authorized to reserve and control
this M-CMTS Downstream interface.
When configured to 'docsisOnly' indicates that it can be
allocated only to serve data… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.5 |
| docsIfMCmtsEqamDownstreamAllocationStatus Indicates the service(s) the M-CMTS Downstream Interface
is allocated for.
'other' BIT set to '1' indicates the resource is currently
allocated to DOCSIS and/or Video services by … | column | Bits | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.6 |
| docsIfMCmtsEqamDownstreamAllocationTimeout Indicates the number of seconds the EQAM device waits
before advertising the QAM channel resource is idle and/or
accepting a session establishment from a different
control plane … | column | seconds Unsigned32 | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.7 |
| docsIfMCmtsEqamDownstreamUdpPortMapping The UDP Port within a L2TPv3 Session PDU the EQAM uses
to map DEPI flows to the EQAM channels associated to this
table entry.
When the EQAM device does not support UDP port mappi… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.6.1.3.1.1.9 |