vpwsBindCfgRemoteSiteID

DC-VPWS-MIB · .1.3.6.1.4.1.629.10.19.1.3.1.9

Object

column r/w DC-L2VPN-MIBL2vpnVeIdOrZero

The remote VPWS site ID of the PW to bind the AC to, or zero
if not specified.
              
This is only used if the pseudowire (PW) is created as a
result of BGP auto-discovery, that is if vpwsBindCfgPwBindType
= lclRmtVeId.
              
If vpwsBindCfgPwBindType = lclRmtVeId then the AC is bound to
a PW that connects the local VPWS site (vpwsConfigLocalSiteID)
to the remote VPWS site, using auto-discovery to determine
the remote PE router that hosts the remote VPWS site.
              
This remote VPWS site ID should match the local VPWS site ID
configured on the remote PE router.
              
The valid range for VPWS site IDs depends on whether
LDP or BGP signaling is used.
-  For LDP signaling (vpwsConfigSigType = ldp) the valid
   range is 1-4294967295 (4 bytes).
-  For BGP signaling (vpwsConfigSigType = bgp) the valid
   range is 1-65535 (2 bytes).
              
Changing this value will cause an interruption to data
flow from this AC onto the VPWS.

Context

MIB: DC-VPWS-MIB
OID: .1.3.6.1.4.1.629.10.19.1.3.1.9
Type: column
Access: readwrite
Status: current
Parent: vpwsBindCfgEntry
Table: vpwsBindCfgTable
Siblings: 7

Syntax

DC-L2VPN-MIBL2vpnVeIdOrZero

Source: DC-L2VPN-MIBL2vpnVeIdOrZero
Base type: Unsigned32

Values & Constraints

Type Constraints

range: 0..4294967295

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vpwsBindCfgLclSwitchIfIndex Interface index that the AC should be bound to directly, via a layer 2 local switching rule (hairpin). Only relevant if the local PE hosts both VPWS sites concerned in this bindi…	column	IF-MIBInterfaceIndexOrZero	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.10`
vpwsBindCfgRowStatus The row status for this VPWS Binding Configuration Table entry, used to create and destroy table entries.	column	SNMPv2-TCRowStatus	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.3`
vpwsBindCfgAdminStatus The administrative status of this VPWS binding, used to activate and deactivate the VPWS binding.	column	DC-MASTER-TCAdminStatus	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.4`
vpwsBindCfgOperStatus The current operational status of this VPWS binding. If the operational status is 'up' then the cross-connect for this binding is programmed in the data plane.	column	DC-MASTER-TCNpgOperStatus	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.5`
vpwsBindCfgVpwsIndex Index identifying the VPWS instance. This field must be set to a non-zero value before the VPWS binding can go into operational status 'up'. Changing…	column	DC-MASTER-TCNumericIndexOrZero	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.6`
vpwsBindCfgPwBindType The VPWS pseudowire (PW) binding type. This field specifies the identifiers used for the PW to which the AC is bound. If the PW is provisioned in the pwTable, then…	column	DC-L2VPN-MIBL2vpnPwBindType	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.7`
vpwsBindCfgPwSetIndex Index for the set of PWs to which the AC should be bound. The AC is bound to every PW in the pwTable with pwRedundancySetId set to this value. This is only used if …	column	Unsigned32	`.1.2.826.0.1.1578918.5.94.114.4.1.1.3.1.8`