cpqNicIfLogMapSpeedMbps
CPQNIC-MIB ·
.1.3.6.1.4.1.232.18.2.2.1.1.19
Object
An estimate of the interface`s current bandwidth in Megabits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
Context
- MIB
- CPQNIC-MIB
- OID
.1.3.6.1.4.1.232.18.2.2.1.1.19- Type
- column
- Access
- readonly
- Status
- optional
- Parent
- cpqNicIfLogMapEntry
- Table
- cpqNicIfLogMapTable
- Siblings
- 22
Syntax
RFC1155-SMIGauge
- Source
- RFC1155-SMIGauge
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqNicIfLogMapIndex mandatory An index that uniquely specifies this entry. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.1 |
| cpqNicIfLogMapCondition mandatory The condition of this interface. This value represents the
overall condition of the logical adapter group.
This value is driven by the cpqNicIfLogMapStatus object
a… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.10 |
| cpqNicIfLogMapStatus mandatory The status of the logical group.
The following values are valid for the logical group status:
unknown(1)
The instrument agent may not support this … | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.11 |
| cpqNicIfLogMapNumSwitchovers mandatory The number of times a fault tolerant switchover has
occurred. Switchovers occur because the primary adapter
fails. | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.18.2.2.1.1.12 |
| cpqNicIfLogMapHwLocation optional A text description of the hardware location, on complex
multi SBB hardware only, for the adapters.
A NULL string indicates that the hardware location could not
be determined or is… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.13 |
| cpqNicIfLogMapSpeed mandatory An estimate of the interface`s current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this obje… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.18.2.2.1.1.14 |
| cpqNicIfLogMapVlanCount mandatory The number of VLANs associated with this logical
adapter. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.15 |
| cpqNicIfLogMapVlans mandatory An array of octets corresponding to the indices in the
cpqNicIfVlanMapTable of the VLANs associated with this
logical adapter. The number of octets is equal to
cpqNicIfLogMapVlan… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.16 |
| cpqNicIfLogMapLastChange mandatory The time the underlying link associated with this
interface changed its status from either link up to
link down or link down to link up. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.232.18.2.2.1.1.17 |
| cpqNicIfLogMapAdvancedTeaming mandatory This bitmap indicates the advanced features being used by the
logical adapter (team).
cpqNicIfLogMapAdvancedTeaming AND 1 is 1, Active Path Failover is
enabled.
cpqNicIfLogMapAdva… | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.18 |
| cpqNicIfLogMapIfNumber mandatory An OCTET STRING representing an array of MIB II Interface
Numbers implemented by this logical adapter. Each entry is
a 32-bit value, represented by 4 octets in LSB...MSB
(Little-E… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.2 |
| cpqNicIfLogMapIPV6Address optional The CIDR(Classless Inter-Domain Routing) notation that the logical adapter
presents to the network. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.18.2.2.1.1.20 |
| cpqNicIfLogMapLACNumber optional Local Area Connection number that the logical adapter
presents to the network. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.18.2.2.1.1.21 |
| cpqNicIfLogMapDHCP mandatory This value indicates whether logical adapter ip address
was obtained via a DHCP server.
The following values are valid:
true(1)
ip address is a dhcp… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.22 |
| cpqNicIfLogMapPciLocation optional A string designating the PCI device location for the controller,
following the format DDDD:BB:DD.F, where DDDD is the PCI domain number,
BB is the PCI bus number, DD is the PCI de… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.23 |
| cpqNicIfLogMapDescription mandatory Description of the logical adapter. This string
is NULL terminated. | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.3 |
| cpqNicIfLogMapGroupType mandatory The type of Fault Tolerance supplied by this logical adapter.
The following types of Fault Tolerance are supported:
unknown(1)
Indicates that the i… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.4 |
| cpqNicIfLogMapAdapterCount mandatory The number of physical adapters associated with this logical
adapter. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.5 |
| cpqNicIfLogMapAdapterOKCount mandatory The number of physical adapters associated with this logical
adapter that have an OK condition. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.6 |
| cpqNicIfLogMapPhysicalAdapters mandatory An array of octets corresponding to the indices in the
cpqNicIfPhysAdapterTable of the physical adapters
associated with this logical adapter. The number
of octets is equal to cp… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.7 |
| cpqNicIfLogMapMACAddress mandatory The MAC (physical) address that the logical adapter
presents to the network. | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.8 |
| cpqNicIfLogMapSwitchoverMode mandatory The algorithm used to determine when to switch network traffic
from one adapter to another.
The following algorithms are supported:
unknown(1)
Indi… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.9 |