cpqNicIfLogMapAdapterOKCount
CPQNIC-MIB ·
.1.3.6.1.4.1.232.18.2.2.1.1.6
Object
column
mandatory
Integer32
The number of physical adapters associated with this logical adapter that have an OK condition.
Context
- MIB
- CPQNIC-MIB
- OID
.1.3.6.1.4.1.232.18.2.2.1.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqNicIfLogMapEntry
- Table
- cpqNicIfLogMapTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqNicIfLogMapIndex mandatory An index that uniquely specifies this entry. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.1 |
| cpqNicIfLogMapCondition mandatory The condition of this interface. This value represents the
overall condition of the logical adapter group.
This value is driven by the cpqNicIfLogMapStatus object
a… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.10 |
| cpqNicIfLogMapStatus mandatory The status of the logical group.
The following values are valid for the logical group status:
unknown(1)
The instrument agent may not support this … | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.11 |
| cpqNicIfLogMapNumSwitchovers mandatory The number of times a fault tolerant switchover has
occurred. Switchovers occur because the primary adapter
fails. | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.18.2.2.1.1.12 |
| cpqNicIfLogMapHwLocation optional A text description of the hardware location, on complex
multi SBB hardware only, for the adapters.
A NULL string indicates that the hardware location could not
be determined or is… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.13 |
| cpqNicIfLogMapSpeed mandatory An estimate of the interface`s current bandwidth
in bits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this obje… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.18.2.2.1.1.14 |
| cpqNicIfLogMapVlanCount mandatory The number of VLANs associated with this logical
adapter. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.15 |
| cpqNicIfLogMapVlans mandatory An array of octets corresponding to the indices in the
cpqNicIfVlanMapTable of the VLANs associated with this
logical adapter. The number of octets is equal to
cpqNicIfLogMapVlan… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.16 |
| cpqNicIfLogMapLastChange mandatory The time the underlying link associated with this
interface changed its status from either link up to
link down or link down to link up. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.232.18.2.2.1.1.17 |
| cpqNicIfLogMapAdvancedTeaming mandatory This bitmap indicates the advanced features being used by the
logical adapter (team).
cpqNicIfLogMapAdvancedTeaming AND 1 is 1, Active Path Failover is
enabled.
cpqNicIfLogMapAdva… | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.18 |
| cpqNicIfLogMapSpeedMbps optional An estimate of the interface`s current bandwidth
in Megabits per second. For interfaces which do not
vary in bandwidth or for those where no accurate
estimation can be made, this … | column | RFC1155-SMIGauge | .1.3.6.1.4.1.232.18.2.2.1.1.19 |
| cpqNicIfLogMapIfNumber mandatory An OCTET STRING representing an array of MIB II Interface
Numbers implemented by this logical adapter. Each entry is
a 32-bit value, represented by 4 octets in LSB...MSB
(Little-E… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.2 |
| cpqNicIfLogMapIPV6Address optional The CIDR(Classless Inter-Domain Routing) notation that the logical adapter
presents to the network. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.18.2.2.1.1.20 |
| cpqNicIfLogMapLACNumber optional Local Area Connection number that the logical adapter
presents to the network. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.18.2.2.1.1.21 |
| cpqNicIfLogMapDHCP mandatory This value indicates whether logical adapter ip address
was obtained via a DHCP server.
The following values are valid:
true(1)
ip address is a dhcp… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.22 |
| cpqNicIfLogMapPciLocation optional A string designating the PCI device location for the controller,
following the format DDDD:BB:DD.F, where DDDD is the PCI domain number,
BB is the PCI bus number, DD is the PCI de… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.23 |
| cpqNicIfLogMapDescription mandatory Description of the logical adapter. This string
is NULL terminated. | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.3 |
| cpqNicIfLogMapGroupType mandatory The type of Fault Tolerance supplied by this logical adapter.
The following types of Fault Tolerance are supported:
unknown(1)
Indicates that the i… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.4 |
| cpqNicIfLogMapAdapterCount mandatory The number of physical adapters associated with this logical
adapter. | column | Integer32 | .1.3.6.1.4.1.232.18.2.2.1.1.5 |
| cpqNicIfLogMapPhysicalAdapters mandatory An array of octets corresponding to the indices in the
cpqNicIfPhysAdapterTable of the physical adapters
associated with this logical adapter. The number
of octets is equal to cp… | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.7 |
| cpqNicIfLogMapMACAddress mandatory The MAC (physical) address that the logical adapter
presents to the network. | column | OctetString | .1.3.6.1.4.1.232.18.2.2.1.1.8 |
| cpqNicIfLogMapSwitchoverMode mandatory The algorithm used to determine when to switch network traffic
from one adapter to another.
The following algorithms are supported:
unknown(1)
Indi… | column | Enumeration | .1.3.6.1.4.1.232.18.2.2.1.1.9 |