cpqFcaAccelWriteErrs
CPQFCA-MIB ·
.1.3.6.1.4.1.232.16.2.2.2.1.8
Object
Array Accelerator Board Write Errors.
This shows the total number of write memory parity errors that
were detected while writing to the Array Accelerator board.
Write parity errors occur when the system detects that
information has not been transferred to the Array
Accelerator board correctly. A parity bit is included for
each byte of information stored in memory. When the
microprocessor reads or writes data, the system counts the
value of the bits in each byte. If the total does not match
the system`s expectations, a parity error has occurred.
Context
- MIB
- CPQFCA-MIB
- OID
.1.3.6.1.4.1.232.16.2.2.2.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqFcaAccelEntry
- Table
- cpqFcaAccelTable
- Siblings
- 13
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqFcaAccelBoxIndex mandatory External Array Controller Storage Box Index.
The storage box index indicates which storage box this
accelerator is in. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.1 |
| cpqFcaAccelWriteCache mandatory Write Cache Memory.
This shows the amount of memory allocated for the write cache in
megabytes. Because data is kept in duplicate (mirrored), the
actual amount of … | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.10 |
| cpqFcaAccelReadCache mandatory Read Cache Memory.
This shows the amount of memory allocated for the read cache in
megabytes. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.11 |
| cpqFcaAccelSerialNumber mandatory Array Accelerator Board Serial Number.
This value can be used to further identify the cache
controller. If the serial number is not supported, the agent
will retur… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.12 |
| cpqFcaAccelTotalMemory mandatory Array Accelerator Total Memory.
This value is the total amount of accelerator memory in
megabytes, including both battery-backed and non-battery-backed
memory. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.13 |
| cpqFcaAccelFailedBatteries mandatory Array Accelerator Failed Batteries.
This lists the location of accelerator failed batteries.
Each octet present contains the position number of a failed
battery. A… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.14 |
| cpqFcaAccelBoxIoSlot mandatory External Array Controller Box I/O Slot.
This identifies the physical I/O slot where this accelerator
resides in the storage box. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.2 |
| cpqFcaAccelStatus mandatory Array Accelerator Board Status.
This describes the status of the Array Accelerator Cache.
The status can be:
Other (1)
Indicates tha… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.3 |
| cpqFcaAccelBadData mandatory Array Accelerator Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.4 |
| cpqFcaAccelErrCode mandatory Array Accelerator Board Error Code.
Use this to determine the status of the write cache operations.
The status can be:
Other (1)
Ind… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.5 |
| cpqFcaAccelBatteryStatus mandatory Array Accelerator Board Battery Status.
This monitors the status of each battery pack on the board. The
batteries can only recharge when the system has power appli… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.6 |
| cpqFcaAccelReadErrs mandatory Array Accelerator Board Read Errors.
This shows the total number of read memory parity errors that
were detected while reading from the Array Accelerator board.
The… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.2.2.2.1.7 |
| cpqFcaAccelCondition mandatory The condition of the device. This value represents the overall
condition of this array accelerator. | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.9 |