cpqFcaAccelBatteryStatus
CPQFCA-MIB ·
.1.3.6.1.4.1.232.16.2.2.2.1.6
Object
column
mandatory
Enumeration
Array Accelerator Board Battery Status.
This monitors the status of each battery pack on the board. The
batteries can only recharge when the system has power applied.
The following values are valid:
Other (1)
Indicates that the instrument agent does not recognize
battery status. You may need to update your software.
Ok (2)
Indicates that a particular battery pack is fully charged.
Charging (3)
The battery power is less than 75%. The array controller
is attempting to recharge the battery. A battery can take
as long as 36 hours to fully recharge. After 36 hours,
if the battery has not recharged, it is considered failed.
Failed (4)
The battery pack is below the sufficient voltage level and
has not recharged in 36 hours. Your Array Accelerator board
needs to be serviced.
Degraded (5)
The battery is still operating, however, one of the batteries
in the pack has failed to recharge properly. Your Array
Accelerator board should be serviced as soon as possible.
NotPresent (6)
There are no batteries associated with this controller.
Context
- MIB
- CPQFCA-MIB
- OID
.1.3.6.1.4.1.232.16.2.2.2.1.6- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqFcaAccelEntry
- Table
- cpqFcaAccelTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | ok |
3 | recharging |
4 | failed |
5 | degraded |
6 | notPresent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqFcaAccelBoxIndex mandatory External Array Controller Storage Box Index.
The storage box index indicates which storage box this
accelerator is in. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.1 |
| cpqFcaAccelWriteCache mandatory Write Cache Memory.
This shows the amount of memory allocated for the write cache in
megabytes. Because data is kept in duplicate (mirrored), the
actual amount of … | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.10 |
| cpqFcaAccelReadCache mandatory Read Cache Memory.
This shows the amount of memory allocated for the read cache in
megabytes. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.11 |
| cpqFcaAccelSerialNumber mandatory Array Accelerator Board Serial Number.
This value can be used to further identify the cache
controller. If the serial number is not supported, the agent
will retur… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.12 |
| cpqFcaAccelTotalMemory mandatory Array Accelerator Total Memory.
This value is the total amount of accelerator memory in
megabytes, including both battery-backed and non-battery-backed
memory. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.13 |
| cpqFcaAccelFailedBatteries mandatory Array Accelerator Failed Batteries.
This lists the location of accelerator failed batteries.
Each octet present contains the position number of a failed
battery. A… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.14 |
| cpqFcaAccelBoxIoSlot mandatory External Array Controller Box I/O Slot.
This identifies the physical I/O slot where this accelerator
resides in the storage box. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.2 |
| cpqFcaAccelStatus mandatory Array Accelerator Board Status.
This describes the status of the Array Accelerator Cache.
The status can be:
Other (1)
Indicates tha… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.3 |
| cpqFcaAccelBadData mandatory Array Accelerator Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.4 |
| cpqFcaAccelErrCode mandatory Array Accelerator Board Error Code.
Use this to determine the status of the write cache operations.
The status can be:
Other (1)
Ind… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.5 |
| cpqFcaAccelReadErrs mandatory Array Accelerator Board Read Errors.
This shows the total number of read memory parity errors that
were detected while reading from the Array Accelerator board.
The… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.2.2.2.1.7 |
| cpqFcaAccelWriteErrs mandatory Array Accelerator Board Write Errors.
This shows the total number of write memory parity errors that
were detected while writing to the Array Accelerator board.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.2.2.2.1.8 |
| cpqFcaAccelCondition mandatory The condition of the device. This value represents the overall
condition of this array accelerator. | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.9 |