cpqFcaAccelBadData
CPQFCA-MIB ·
.1.3.6.1.4.1.232.16.2.2.2.1.4
Object
column
mandatory
Enumeration
Array Accelerator Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly charged when the system was initialized.
Possible (3)
Indicates that at power up, the battery packs were not
sufficiently charged. Because the batteries did not retain
sufficient charge when the system resumed power, the board
has not retained any data that may have been stored.
If no data was on the board, no data was lost. Several things
may have caused this condition:
* If the system was without power for eight days, and the
battery packs were on (battery packs only activate if
system looses power unexpectedly), any data that may have
been stored in the cache was lost.
* There may be a problem with the battery pack.
See the Battery Status for more information.
* This status will also appear if the Array Accelerator
board is replaced with a new board that has discharged
batteries. No data has been lost in this case, and posted
writes will automatically be enabled when the batteries
reach full charge.
Context
- MIB
- CPQFCA-MIB
- OID
.1.3.6.1.4.1.232.16.2.2.2.1.4- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cpqFcaAccelEntry
- Table
- cpqFcaAccelTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | none |
3 | possible |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpqFcaAccelBoxIndex mandatory External Array Controller Storage Box Index.
The storage box index indicates which storage box this
accelerator is in. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.1 |
| cpqFcaAccelWriteCache mandatory Write Cache Memory.
This shows the amount of memory allocated for the write cache in
megabytes. Because data is kept in duplicate (mirrored), the
actual amount of … | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.10 |
| cpqFcaAccelReadCache mandatory Read Cache Memory.
This shows the amount of memory allocated for the read cache in
megabytes. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.11 |
| cpqFcaAccelSerialNumber mandatory Array Accelerator Board Serial Number.
This value can be used to further identify the cache
controller. If the serial number is not supported, the agent
will retur… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.12 |
| cpqFcaAccelTotalMemory mandatory Array Accelerator Total Memory.
This value is the total amount of accelerator memory in
megabytes, including both battery-backed and non-battery-backed
memory. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.13 |
| cpqFcaAccelFailedBatteries mandatory Array Accelerator Failed Batteries.
This lists the location of accelerator failed batteries.
Each octet present contains the position number of a failed
battery. A… | column | OctetString | .1.3.6.1.4.1.232.16.2.2.2.1.14 |
| cpqFcaAccelBoxIoSlot mandatory External Array Controller Box I/O Slot.
This identifies the physical I/O slot where this accelerator
resides in the storage box. | column | Integer32 | .1.3.6.1.4.1.232.16.2.2.2.1.2 |
| cpqFcaAccelStatus mandatory Array Accelerator Board Status.
This describes the status of the Array Accelerator Cache.
The status can be:
Other (1)
Indicates tha… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.3 |
| cpqFcaAccelErrCode mandatory Array Accelerator Board Error Code.
Use this to determine the status of the write cache operations.
The status can be:
Other (1)
Ind… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.5 |
| cpqFcaAccelBatteryStatus mandatory Array Accelerator Board Battery Status.
This monitors the status of each battery pack on the board. The
batteries can only recharge when the system has power appli… | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.6 |
| cpqFcaAccelReadErrs mandatory Array Accelerator Board Read Errors.
This shows the total number of read memory parity errors that
were detected while reading from the Array Accelerator board.
The… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.2.2.2.1.7 |
| cpqFcaAccelWriteErrs mandatory Array Accelerator Board Write Errors.
This shows the total number of write memory parity errors that
were detected while writing to the Array Accelerator board.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.232.16.2.2.2.1.8 |
| cpqFcaAccelCondition mandatory The condition of the device. This value represents the overall
condition of this array accelerator. | column | Enumeration | .1.3.6.1.4.1.232.16.2.2.2.1.9 |