cpqCrLogDrvStatus

CPQCR-MIB · .1.3.6.1.4.1.232.141.2.3.1.1.4

Object

column mandatory Enumeration

RAIDset Status.
              
The RAIDset can be in one of the following states:
              
Good (2)
  Indicates that the RAIDset is fully operational.
              
Reduced (3)
  Indicates that the RAIDset is operating in a degraded or
  reduced state. One or more of the physical disks which make
  up the RAIDset are either missing or failed, but the
  RAIDset can continue to operate without data loss.
              
Failed (4)
  Indicates that the RAIDset is not operational.
              
Reconstructing (5)
  Indicates that the RAIDset is regenerating a failed
  physical drive's data onto a replacement drive that is part
  of the RAIDset.
              
  All user data remains available during the reconstruction
  process, but some performance reduction may occur when a
  request requires access to the device being reconstructed.
              
Initializing (6)
  Indicates that the controller is writing its file structure
  onto the RAIDset's member devices.

Context

MIB: CPQCR-MIB
OID: .1.3.6.1.4.1.232.141.2.3.1.1.4
Type: column
Access: readonly
Status: mandatory
Parent: cpqCrLogDrvEntry
Table: cpqCrLogDrvTable
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	other
`2`	good
`3`	reduced
`4`	failed
`5`	reconstructing
`6`	initializing

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cpqCrLogDrvCntlrIndex mandatory Clustered RAID RAIDset Controller Index. This maps the RAIDsets into their respective controllers. Controller index 'i' under the controller group owns the associat…	column	Integer32	`.1.3.6.1.4.1.232.141.2.3.1.1.1`
cpqCrLogDrvCondition mandatory RAIDset condition. This value represents the overall condition of this RAIDset and any associated physical drives.	column	Enumeration	`.1.3.6.1.4.1.232.141.2.3.1.1.10`
cpqCrLogDrvPartitionIDs mandatory RAIDset Logical Drive IDs. This lists the logical drive IDs which are associated with this RAIDset. These are the same IDs which can be used as indices into the log…	column	OctetString	`.1.3.6.1.4.1.232.141.2.3.1.1.11`
cpqCrLogDrvIndex mandatory Clustered RAID RAIDset Index. This logical drive number keeps track of multiple instances of logical drives which are on the same controller. For each controller i…	column	Integer32	`.1.3.6.1.4.1.232.141.2.3.1.1.2`
cpqCrLogDrvRAIDLevel mandatory RAID Level. This shows the RAID level of the RAIDset. To change the RAID level, run the CL1850 Array Configuration Utility. The following values are …	column	Enumeration	`.1.3.6.1.4.1.232.141.2.3.1.1.3`
cpqCrLogDrvRebuildPercentage mandatory RAIDset Rebuild Percentage Complete. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value shows how far the r…	column	Integer32	`.1.3.6.1.4.1.232.141.2.3.1.1.5`
cpqCrLogDrvAvailSpares mandatory RAIDset Available Spares. This indicates if this RAIDset has one or more spares designated for it that are not currently in use by another drive. Each octet present…	column	OctetString	`.1.3.6.1.4.1.232.141.2.3.1.1.7`
cpqCrLogDrvSize mandatory RAIDset Size. This is the size of the RAIDset in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes …	column	Integer32	`.1.3.6.1.4.1.232.141.2.3.1.1.8`
cpqCrLogDrvPhyDrvIDs mandatory RAIDset Physical Drive IDs. This lists the physical drive IDs which are associated with this RAIDset. These are the same IDs which can be used as indices into the p…	column	OctetString	`.1.3.6.1.4.1.232.141.2.3.1.1.9`