criticalTemperature
CONTIVITY-TRAPS-V1-MIB ·
.1.3.6.1.4.1.2505.1.1.17
Object
scalar
RFC1213-MIBDisplayString
Status of critical temperature reading.
Possible Values:
Alert: Critical Temperature: Critial temperature out of range;
This indicates that the box is running at a critically high
temperature above the normal operating range. This is only
supported on certain platforms. See the Admin Guide for a
list of platforms which support this.
The box must be shut down immediately. Component failure
may already have occurred. If the reason for such a high
operating temperature cannot be determined, contact a
qualified Nortel representative.
Context
- MIB
- CONTIVITY-TRAPS-V1-MIB
- OID
.1.3.6.1.4.1.2505.1.1.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hardwareCESTrapInfo
- Siblings
- 25
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hardDisk1Status Hard Disk Number 1 Status.
Possible Values:
Warning: Hard Disk 1 : Device /ide1/ not available
Warning: Hard Disk 1 : Utilization exceeds 75%% on /ide1/
Alert: Hard Disk 1 : Util… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.1 |
| fiveVoltsMinus Status of -5 Volt power.
Possible Values:
Alert: Voltage 5 V Minus: Voltage out of range;
The supplied voltage to the system is not within the
the specified… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.10 |
| threeVoltsPositive Status of +3 Volt power.
Possible Values:
Alert: Voltage 3.3 V Plus: Voltage out of range;
The supplied voltage to the system is not within the
the specifie… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.11 |
| twoDotFiveVA Status of 2.5VA power.
Possible Values:
Alert: Voltage 2.5 VA: Voltage out of range;
This is the voltage supplied to the primary processor.
The supplied vol… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.12 |
| twoDotFiveVB Status of 2.5VB power.
Possible Values:
Alert: Voltage 2.5 VB: Voltage out of range;
This is the voltage supplied to the seconary processor.
The supplied vo… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.13 |
| twelveVoltsPositive Status of +12 Volt power.
Possible Values:
Alert: Voltage 12 V Plus: Voltage out of range;
The supplied voltage to the system is not within the
the specifie… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.14 |
| twelveVoltsMinus Status of -12 Volt power.
Possible Values:
Alert: Voltage 12 V Minus: Voltage out of range;
The supplied voltage to the system is not within the
the specifi… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.15 |
| normalTemperature Status of normal temperature reading.
Possible Values:
Alert: Normal Temperature: Normal temperature out of range;
This indicates that the box is running above … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.16 |
| chassisIntrusion The chassis intrusion sensor indicates that the unit has been opened.
Possible Values:
Alert: Intrusion: Box has been opened;
The cover to the CES ha… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.18 |
| dualPowerSupply Status of the redundant power supplies.
Possible Values:
Alert: Dual Power Supply: Redundant supply faulted
This indicates that, on systems with redundant power… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.19 |
| hardDisk0Status Hard Disk Number 0 Status.
Possible Values:
Warning: Hard Disk 0 : Device /ide0/ not available
Warning: Hard Disk 0 : Utilization exceeds 75%% on /ide0/
Alert: Hard Disk 0 : Util… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.2 |
| t1WANStatus Status of T1 WAN card(s).
Possible Values:
For Wanic support:
Alert: Invalid Device X
Warning: Device WanicX disabled
Alert: Device WanicX down
W… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.20 |
| t3WANStatus Status of T3 WAN card
Possible Values:
Alert: Invalid Index X
Warning: Device HSSIX disabled
Alert: Device HSSIX down
Warning: Device HSSIX not initialized
Alert: Device HSSIX PPP… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.21 |
| hwAccelStatus Status of hardware accelerator card. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.22 |
| v90WANStatus Status of V.90 Interface card
Possible Values:
Please note that X corresponds to the unit number of the card.
Alert: V.90 Invalid index X
Disabled: Device IntModem-X disabled
He… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.24 |
| briWANStatus Status of ISDN BRI Interface card
Possible Values:
Please note that X corresponds to the unit number of the card.
Alert: BRI Invalid index X
Alert: Device BRI-X not Responding. … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.25 |
| serUartStatus Status of Serial (COM) port/interface
Possible Values:
Please note that X corresponds to the unit number of the serial interface
Alert: COM port Invalid index X
Healthy: Device … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.26 |
| adslWANStatus Status of ADI ADSL card
Possible Values:
Please note that X corresponds to the unit number of the serial interface
Alert: Invalid index X
Alert: Device ADIADSLX off line
Disable… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.27 |
| memoryUsage Memory Usage Status.
Possible Values:
Warning: Memory Usage : Utilization exceeds 75%
Alert: Memory Usage : Utilization exceeds 87.5% | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.3 |
| lanCardStatus Status of any LAN cards on the system.
Possible Values:
Please note that X corresponds to the Xth slot in the system.
Please note that Y corresponds to the relative positi… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.4 |
| cpuTwoStatus Status of second CPU.
Possible Values:
Alert: CPU 2: Program load failed;
Alert: CPU 2: Bootup did not complete;
Alert: CPU 2: Communication lost;
Alert: CPU 2: Failed. Reason unk… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.5 |
| fanOneStatus Status of the first CPU fan.
Possible Values:
Alert: CPU One Fan: Fan not functioning;
This indicates that the fan on the primary processor is
running either below the … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.6 |
| fanTwoStatus Status of the second CPU fan
Possible Values:
Alert: CPU Two Fan: Fan not functioning;
This indicates that the fan on the auxiliary processor is
running either below th… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.7 |
| chassisFanStatus Status of the chassis fan.
Possible Values:
Alert: Chassis Fan: Fan not functioning;
Alert: Chassis Fan 2: Fan not functioning;
This indicates that one of t… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.8 |
| fiveVoltsPositive Status of +5 Volt power.
Possible Values:
Alert: Voltage 5 V Plus: Voltage out of range;
The supplied voltage to the system is not within the
the specified … | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| severityLevel Severity of specific trap. | scalar | Enumeration | .1.3.6.1.4.1.2505.1.7 |
| fanTwoStatus Status of the second CPU fan
Possible Values:
Alert: CPU Two Fan: Fan not functioning;
This indicates that the fan on the auxiliary processor is
running either below th… | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.1.7 |
| systemName System Name. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.8 |
| systemDate System Date. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.9 |
| systemTime System Time. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.10 |
| systemUpTime System Up Time. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2505.1.11 |