cmdot11plusPhyOperatingMode

CM-dot11plus-MIB · .1.3.6.1.4.1.1166.1.19.51.1.1.1.9
MIB view Table view

Object

scalar deprecated r/w Enumeration 
This is the supported wireless operating mode of the SBG.
Select the default 11b/11g standard(1) option for most cases as this is the 
most flexible mode. It allows both 802.11b and 802.11g stations to work 
with the SBG device.  Select the 11g enhanced(2) option only if all 
802.11g stations in use are compatible with the performance enhancing 
features of the 11g Enhanced mode. Note: 11g enhanced is a proprietary 
mode which is not supported by all 802.11g stations.
          
This MIB object is only valid for products supporting a single SSID

Context

MIB
CM-dot11plus-MIB
OID
.1.3.6.1.4.1.1166.1.19.51.1.1.1.9
Type
scalar
Access
readwrite
Status
deprecated
Parent
cmdot11plusMgmtObjects
Siblings
12

Syntax

Enumeration

Values & Constraints

Enumerated Values
1standard
2enhanced

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmdot11plusWepMode deprecated
The WEP encryption mode of 802.11 interface. This object is not writable and its return value should be ignored if cmdot11plusSecurityMode is not set to wep(2). …
scalarEnumeration.1.3.6.1.4.1.1166.1.19.51.1.1.1.1
cmdot11plusTxOutputPower deprecated
This object controls the ouput power of the 802.11 transmitter. The number is a percentage of the maximum power possible based on 802.11 technology and other board specific iss…
scalarInteger32.1.3.6.1.4.1.1166.1.19.51.1.1.1.10
cmdot11plusWepPassPhrase deprecated
Controls and reflects the WEP pass phrase. This MIB object is only valid for products supporting a single SSID
scalarOctetString.1.3.6.1.4.1.1166.1.19.51.1.1.1.11
cmdot11plusGenerateWepKeys deprecated
Applies the WEP PassPhrase by generating new keys from the string set in cmdot11plusWepPassPhrase. The keys are generated using the algorithm described in 802.11i appendix F. Th…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.1.1.1.12
cmdot11plusSecurityMode deprecated
Sets the network authentication and/or security method. WEP requires cmdot11plusWepMode to be set to either 64bit or 128bit encryption and valid keys be entered. WPA requires …
scalarEnumeration.1.3.6.1.4.1.1166.1.19.51.1.1.1.13
cmdot11plusWep128DefaultKeysTable deprecated
Table containing 128-bit WEP parameters. This table shall contain the four WEP default secret 128-bit key values corresponding to the four possible values. The WEP default secret…
table-.1.3.6.1.4.1.1166.1.19.51.1.1.1.2
cmdot11plusAclEnable deprecated
This object controls whether MAC address ACL checking is enabled in the access point. When 'true', AP allows only those stations listed in cmdot11plusAclTable to associate. When '…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.1.1.1.3
cmdot11plusAclTable deprecated
MAC ACL table contains a list of MAC addresses for stations that are allowed to associate with the access point. This MIB object is only valid for products supporting a…
table-.1.3.6.1.4.1.1166.1.19.51.1.1.1.4
cmdot11plusSsidBroadcastEnable deprecated
When 'true', AP does broadcast SSID in beacon packets. When 'false', AP does not broadcast SSID in beacon packets. This MIB object is only valid for products supporting…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.1.1.1.5
cmdot11plusBasicRates deprecated
Set of data rates that all stations in a BSS must be capable of receiving. This MIB object is only valid for products supporting a single SSID
scalarEnumeration.1.3.6.1.4.1.1166.1.19.51.1.1.1.6
cmdot11plusShortPreambleEnable deprecated
When 'true', AP tranamits packets using a short preamble. When 'false', AP transmits packets with the standard long preamble. This MIB object is only valid for products…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.1.1.1.7
cmdot11plusCountersReset deprecated
Setting this object to true(1) resets the counters in dot11CountersTable. Reading this object always returns false(2). This MIB object is only valid for products suppor…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1166.1.19.51.1.1.1.8