cmdot11plusCountersReset
CM-dot11plus-MIB ·
.1.3.6.1.4.1.1166.1.19.51.1.1.1.8
Object
Setting this object to true(1) resets the counters in dot11CountersTable.
Reading this object always returns false(2).
This MIB object is only valid for products supporting a single SSID
Context
- MIB
- CM-dot11plus-MIB
- OID
.1.3.6.1.4.1.1166.1.19.51.1.1.1.8- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- cmdot11plusMgmtObjects
- Siblings
- 12
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmdot11plusWepMode deprecated The WEP encryption mode of 802.11 interface.
This object is not writable and its return value should be ignored
if cmdot11plusSecurityMode is not set to wep(2).
… | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.1 |
| cmdot11plusTxOutputPower deprecated This object controls the ouput power of the 802.11 transmitter. The number
is a percentage of the maximum power possible based on 802.11 technology
and other board specific iss… | scalar | Integer32 | .1.3.6.1.4.1.1166.1.19.51.1.1.1.10 |
| cmdot11plusWepPassPhrase deprecated Controls and reflects the WEP pass phrase.
This MIB object is only valid for products supporting a single SSID | scalar | OctetString | .1.3.6.1.4.1.1166.1.19.51.1.1.1.11 |
| cmdot11plusGenerateWepKeys deprecated Applies the WEP PassPhrase by generating new keys from the string
set in cmdot11plusWepPassPhrase. The keys are generated using the
algorithm described in 802.11i appendix F. Th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.12 |
| cmdot11plusSecurityMode deprecated Sets the network authentication and/or security method.
WEP requires cmdot11plusWepMode to be set to either 64bit or 128bit
encryption and valid keys be entered.
WPA requires … | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.13 |
| cmdot11plusWep128DefaultKeysTable deprecated Table containing 128-bit WEP parameters.
This table shall contain the four WEP default secret 128-bit key values
corresponding to the four possible values. The WEP default secret… | table | - | .1.3.6.1.4.1.1166.1.19.51.1.1.1.2 |
| cmdot11plusAclEnable deprecated This object controls whether MAC address ACL checking is enabled in the access point.
When 'true', AP allows only those stations listed in cmdot11plusAclTable to associate.
When '… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.3 |
| cmdot11plusAclTable deprecated MAC ACL table contains a list of MAC addresses for stations that are allowed to
associate with the access point.
This MIB object is only valid for products supporting a… | table | - | .1.3.6.1.4.1.1166.1.19.51.1.1.1.4 |
| cmdot11plusSsidBroadcastEnable deprecated When 'true', AP does broadcast SSID in beacon packets.
When 'false', AP does not broadcast SSID in beacon packets.
This MIB object is only valid for products supporting… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.5 |
| cmdot11plusBasicRates deprecated Set of data rates that all stations in a BSS must be capable of receiving.
This MIB object is only valid for products supporting a single SSID | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.6 |
| cmdot11plusShortPreambleEnable deprecated When 'true', AP tranamits packets using a short preamble.
When 'false', AP transmits packets with the standard long preamble.
This MIB object is only valid for products… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.7 |
| cmdot11plusPhyOperatingMode deprecated This is the supported wireless operating mode of the SBG.
Select the default 11b/11g standard(1) option for most cases as this is the
most flexible mode. It allows both 802.11b a… | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.9 |