cmdot11plusAclEnable
CM-dot11plus-MIB ·
.1.3.6.1.4.1.1166.1.19.51.1.1.1.3
Object
This object controls whether MAC address ACL checking is enabled in the access point.
When 'true', AP allows only those stations listed in cmdot11plusAclTable to associate.
When 'false', AP allows any station to associate.
This MIB object is only valid for products supporting a single SSID
Context
- MIB
- CM-dot11plus-MIB
- OID
.1.3.6.1.4.1.1166.1.19.51.1.1.1.3- Type
- scalar
- Access
- readwrite
- Status
- deprecated
- Parent
- cmdot11plusMgmtObjects
- Siblings
- 12
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmdot11plusWepMode deprecated The WEP encryption mode of 802.11 interface.
This object is not writable and its return value should be ignored
if cmdot11plusSecurityMode is not set to wep(2).
… | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.1 |
| cmdot11plusTxOutputPower deprecated This object controls the ouput power of the 802.11 transmitter. The number
is a percentage of the maximum power possible based on 802.11 technology
and other board specific iss… | scalar | Integer32 | .1.3.6.1.4.1.1166.1.19.51.1.1.1.10 |
| cmdot11plusWepPassPhrase deprecated Controls and reflects the WEP pass phrase.
This MIB object is only valid for products supporting a single SSID | scalar | OctetString | .1.3.6.1.4.1.1166.1.19.51.1.1.1.11 |
| cmdot11plusGenerateWepKeys deprecated Applies the WEP PassPhrase by generating new keys from the string
set in cmdot11plusWepPassPhrase. The keys are generated using the
algorithm described in 802.11i appendix F. Th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.12 |
| cmdot11plusSecurityMode deprecated Sets the network authentication and/or security method.
WEP requires cmdot11plusWepMode to be set to either 64bit or 128bit
encryption and valid keys be entered.
WPA requires … | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.13 |
| cmdot11plusWep128DefaultKeysTable deprecated Table containing 128-bit WEP parameters.
This table shall contain the four WEP default secret 128-bit key values
corresponding to the four possible values. The WEP default secret… | table | - | .1.3.6.1.4.1.1166.1.19.51.1.1.1.2 |
| cmdot11plusAclTable deprecated MAC ACL table contains a list of MAC addresses for stations that are allowed to
associate with the access point.
This MIB object is only valid for products supporting a… | table | - | .1.3.6.1.4.1.1166.1.19.51.1.1.1.4 |
| cmdot11plusSsidBroadcastEnable deprecated When 'true', AP does broadcast SSID in beacon packets.
When 'false', AP does not broadcast SSID in beacon packets.
This MIB object is only valid for products supporting… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.5 |
| cmdot11plusBasicRates deprecated Set of data rates that all stations in a BSS must be capable of receiving.
This MIB object is only valid for products supporting a single SSID | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.6 |
| cmdot11plusShortPreambleEnable deprecated When 'true', AP tranamits packets using a short preamble.
When 'false', AP transmits packets with the standard long preamble.
This MIB object is only valid for products… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.7 |
| cmdot11plusCountersReset deprecated Setting this object to true(1) resets the counters in dot11CountersTable.
Reading this object always returns false(2).
This MIB object is only valid for products suppor… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1166.1.19.51.1.1.1.8 |
| cmdot11plusPhyOperatingMode deprecated This is the supported wireless operating mode of the SBG.
Select the default 11b/11g standard(1) option for most cases as this is the
most flexible mode. It allows both 802.11b a… | scalar | Enumeration | .1.3.6.1.4.1.1166.1.19.51.1.1.1.9 |