ethLanSwitchMaxPacketSize
ALFOPLUS-SIAE-MIB ·
.1.3.6.1.4.1.3373.25.25.3.1.6
Object
column
r/w
Enumeration
Define the max ethernet packet size
Context
- MIB
- ALFOPLUS-SIAE-MIB
- OID
.1.3.6.1.4.1.3373.25.25.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ethLanSwitchRecord
- Table
- ethLanSwitchTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | sz-std |
2 | sz-max |
3 | sz-jumbo |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethLanSwitchUnitId This object is used as Index of the Ethernet Lan Switch Table.
It identifies one of the Equipment's unit | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.25.25.3.1.1 |
| ethLanSwitchStpHelloTime The time interval (seconds) between the generation of Configuration
BPDUs by the Root. This parameter is not directly used by the
Spanning Tree Algorithm but is conveyed in Config… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.10 |
| ethLanSwitchStpForwardDelay A timeout value (seconds) to be used by all Bridges in the Bridged
LAN. The value of Forward Delay is set by the Root. This parameter
is conveyed to ensure that each Bridge in a B… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.11 |
| ethLanSwitchStpForceVersion Force Protocol Version. In an RSTP Bridge, this variable can take
the value 0 (indicating that the RSTP state machines operate in
STP Compatibility. mode) or 2 (the default value,… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.3.1.12 |
| ethLanSwitchStpBridge1UnitMacAddress This is a 6 byte object that shows the MAC address of the first
bridge | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.25.3.1.13 |
| ethLanSwitchStpBridge2UnitMacAddress This is a 6 byte object that shows the MAC address of the second
bridge | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.25.3.1.14 |
| ethLanSwitchStpBridge3UnitMacAddress This is a 6 byte object that shows the MAC address of the third
bridge | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.25.3.1.15 |
| ethLanSwitchStpBridge1Priority The priority part of the first Bridge Identifier. The Bridge
Identifier comprises two parts, one of which is derived from the
unique Bridge Address (MAC address) and assures the u… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.16 |
| ethLanSwitchStpBridge2Priority The priority part of the second Bridge Identifier. The Bridge
Identifier comprises two parts, one of which is derived from the
unique Bridge Address (MAC address) and assures the … | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.17 |
| ethLanSwitchStpBridge3Priority The priority part of the third Bridge Identifier. The Bridge
Identifier comprises two parts, one of which is derived from the
unique Bridge Address (MAC address) and assures the u… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.18 |
| ethLanSwitchNodalVlanTable It is a 8x32 bytes buffer, each 32 bytes are reserved to a switch
device (IDU of multiplan configuration) according to the
following schema:
+--------------… | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.25.3.1.19 |
| ethLanSwitchPriorityWeight It defines the queue controller policy used to output packets.
wfq8421: use a weighted round robin queuing scheme
(default is 8,4,2,1)
strictPriority: use S… | column | Enumeration | .1.3.6.1.4.1.3373.25.25.3.1.2 |
| ethLanSwitchMacTablePerVid It enables the MAC table management per Vlan Id | column | Enumeration | .1.3.6.1.4.1.3373.25.25.3.1.20 |
| ethLanSwitchPTOSPriorityTable For each of 64 values of the 6-bit DSCP field (bit 7-2
of IP TOS/DiffServ/Traffic ) two bit are reserved coding one of
the 3 internal buffers reserved for the corresponding value.… | column | SNMPv2-SMIOpaque | .1.3.6.1.4.1.3373.25.25.3.1.3 |
| ethLanSwitchCommonPriorityQueue This object is used to map the internal priority (or queue 0..3)
according to the priority of the incoming packets.
This parameter is common to all ports.
To each priority (0..7) … | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.4 |
| ethLanSwitchAgingTimer The aging timer specifies the time interval (expressed as seconds)
between aging checks at each address. The age time can be modified
in 15 second steps, 0 means aging disabled (R… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.5 |
| ethLanSwitchLLFWaitTime The LLF Wait Time specifies the time interval (expressed as seconds)
to wait for before actuating the Link Loss Forwarding. | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.7 |
| ethLanSwitchCoreTag This Tag Protocol Identifier is added to frames that egress the
switch ad Double Tagged frames. It is the TPID expected during
ingress to determine if a frame is Tagged or not on … | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.8 |
| ethLanSwitchStpMaxAge A timeout value (seconds) to be used by all Bridges in the Bridged
LAN. The value of Max Age is set by the Root. This parameter is
conveyed to ensure that each Bridge in a Bridged… | column | Integer32 | .1.3.6.1.4.1.3373.25.25.3.1.9 |