ZhoneVdsl-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
295

zhoneVdslLineTable

table
.1.3.6.1.4.1.5504.5.13.1.1.1 · 1 row entry · 4 columns
Open in standard view 
This table includes common attributes describing
both ends of the line.  It is required for all VDSL
physical interfaces.  VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97).
zhoneVdslLineEntry entry .1.3.6.1.4.1.5504.5.13.1.1.1.1
An entry in the vdslLineTable.
Indexes
IF-MIBifIndex
Column Syntax OID
zhoneVdslLineCoding
Specifies the VDSL coding type used on this line.
ZhoneVdslLineCodingType
Textual Convention: ZhoneVdslLineCodingType Enumeration
Type Values:
1other
2mcm
3scm
 .1.3.6.1.4.1.5504.5.13.1.1.1.1.1
zhoneVdslLineType
Defines the type of VDSL physical line entity that exists,
by defining whether and how the line is channelized. If

the line is channelized, the value will be other than
noChannel(1). This object define…
Enumeration
Enumerated Values:
1noChannel
2fastOnly
3interleavedOnly
4fastOrInterleaved
5fastAndInterleaved
 .1.3.6.1.4.1.5504.5.13.1.1.1.1.2
zhoneVdslLineConfProfile
The value of this object identifies the row in the VDSL
Line Configuration Profile Table, zhoneVdslLineConfProfileTable,
which applies for this VDSL line, and channels if
applicable.

This object MUST be m…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5504.5.13.1.1.1.1.3
zhoneVdslLineAlarmConfProfile
The value of this object identifies the row in the VDSL
Line Alarm Configuration Profile Table,
zhoneVdslLineAlarmConfProfileTable, which applies to this
VDSL line, and channels if applicable.

This object…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5504.5.13.1.1.1.1.4

zhoneVdslPhysTable

table
.1.3.6.1.4.1.5504.5.13.1.1.2 · 1 row entry · 15 columns
Open in standard view 
This table provides one row for each Vtu.  Each row
contains the Physical Layer Parameters table for that
Vtu.  VDSL physical interfaces are those ifEntries where
ifType is equal to vdsl(97).
zhoneVdslPhysEntry entry .1.3.6.1.4.1.5504.5.13.1.1.2.1
An entry in the vdslPhysTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide
Column Syntax OID
zhoneVdslPhysSide
Identifies whether the transceiver is the Vtuc or Vtur.
ZhoneVdslLineEntity
Textual Convention: ZhoneVdslLineEntity Enumeration
Type Values:
1vtuc
2vtur
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.1
zhoneVdslPhysInvSerialNumber
The vendor specific string that identifies the

vendor equipment.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.2
zhoneVdslPhysInvVendorID
The vendor ID code is a copy of the binary vendor
identification field expressed as readable characters
in hexadecimal notation.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.3
zhoneVdslPhysInvVersionNumber
The vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field expressed as
readable characters in hexadecimal notation.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.4
zhoneVdslPhysCurrSnrMgn
Noise Margin as seen by this Vtu with respect to its
received signal in 0.10dB. The effective range is
-31.75 to +31.75 dB.
0.10dBmInteger32
Constraints:
range: -127-127
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.5
zhoneVdslPhysCurrAtn
Measured difference in the total power transmitted by
the peer Vtu and the total power received by this Vtu.
The effective range is 0 to +63.75 dB.
0.10dBmUnsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.6
zhoneVdslPhysCurrStatus
Indicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:

0 noDefect There are no defects on the line.

1 lossOfFram…
Bits
Enumerated Values:
0noDefect
1lossOfFraming
2lossOfSignal
3lossOfPower
4lossOfSignalQuality
5lossOfLink
6dataInitFailure
7configInitFailure
8protocolInitFailure
9noPeerVtuPresent
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.7
zhoneVdslPhysCurrOutputPwr
Measured total output power transmitted by this VTU.
This is the measurement that was reported during
the last activation sequence.
0.1dBmInteger32
Constraints:
range: 0-160
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.8
zhoneVdslPhysCurrAttainableRate
Indicates the maximum currently attainable data rate
in steps of 1000 bits/second by the Vtu. This value
will be equal to or greater than vdslPhysCurrLineRate.
Note that for SCM, the minimum and maximum data rates
are …
kbpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.9
zhoneVdslPhysCurrLineRate
Indicates the current data rate in steps of 1000
bits/second by the Vtu. This value will be less than
or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
1000 bps.
kbpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.10
zhoneVdslPhysCurrConnType
Indicates current connection type.

unknown(1) - could not determine connection type
not-connected(2) - connection has not been established
invalid(3) - unknown connection established
adsl(4…
Enumeration
Enumerated Values:
1unknown
2not-connected
3invalid
4adsl
5adsl2
6adsl2-annexm
7adsl2plus
8adsl2plus-annexm
9vdsl1
10vdsl2
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.12
zhoneVdslPhysCurrProfile
Indicates current VDSL profile being used in the
connection. This object is only valid for VDSL
connections.
Enumeration
Enumerated Values:
1g993-2-8a
2g993-2-8b
3g993-2-8c
4g993-2-8d
5g993-2-12a
6g993-2-12b
7g993-2-17a
8g993-2-30a
9no-vdsl-connection
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.13
zhoneVdslPhysPhyRActive
Phy Retransmit Rx Queue Active.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.14
zhoneVdslPhysGinpActive
G.INP/ITU-G.998.4 feature active
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.15
zhoneVdslPhysTransportMode
Transport mode, either ATM or PTM
Enumeration
Enumerated Values:
1atm
2ptm
 .1.3.6.1.4.1.5504.5.13.1.1.2.1.16

zhoneVdslChanTable

table
.1.3.6.1.4.1.5504.5.13.1.1.3 · 1 row entry · 5 columns
Open in standard view 
This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).
zhoneVdslChanEntry entry .1.3.6.1.4.1.5504.5.13.1.1.3.1
An entry in the vdslChanTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide
Column Syntax OID
zhoneVdslChanInterleaveDelay
Interleave Delay for this channel.

Interleave delay applies only to the interleave
(slow) channel and defines the mapping (relative
spacing) between subsequent input bytes at the

interleave…
millisecondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.3.1.1
zhoneVdslChanCrcBlockLength
Indicates the length of the channel data-block
on which the CRC operates.
bytesSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.3.1.2
zhoneVdslChanCurrTxRate
Actual transmit data rate on this channel. Note: 1
kbps = 1000 bps.
kbpsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.3.1.3
zhoneVdslChanCurrTxSlowBurstProtect
Actual level of impulse noise (burst) protection
for an interleaved (slow) channel. This parameter is
not applicable to fast channels. For fast channels,
a value of zero shall be returned.
microsecondsUnsigned32
Constraints:
range: 0-1275
 .1.3.6.1.4.1.5504.5.13.1.1.3.1.4
zhoneVdslChanCurrTxFastFec
Actual Forward Error Correction (FEC) redundancy
related overhead for a fast channel. This parameter
is not applicable to an interleaved (slow) channel.
For interleaved channels, a value of zero shall be
returned.
%Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.5504.5.13.1.1.3.1.5

zhoneVdslPerfDataTable

table
.1.3.6.1.4.1.5504.5.13.1.1.4 · 1 row entry · 54 columns
Open in standard view 
This table provides one row for each VDSL physical
interface.  VDSL physical interfaces are those ifEntries
where ifType is equal to vdsl(97).
zhoneVdslPerfDataEntry entry .1.3.6.1.4.1.5504.5.13.1.1.4.1
An entry in the vdslPerfDataTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide
Column Syntax OID
zhoneVdslPerfDataValidIntervals
Valid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.1
zhoneVdslPerfDataInvalidIntervals
Invalid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.2
zhoneVdslPerfDataLofs
Count of seconds since the unit was last reset that there
was Loss of Framing.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.3
zhoneVdslPerfDataLoss
Count of seconds since the unit was last reset that there
was Loss of Signal.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.4
zhoneVdslPerfDataLprs
Count of seconds since the unit was last reset that there
was Loss of Power.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.5
zhoneVdslPerfDataLols
Count of seconds since the unit was last reset that there
was Loss of Link.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.6
zhoneVdslPerfDataESs
Count of Errored Seconds since the unit was last reset.
An Errored Second is a one-second interval containing one
or more CRC anomalies, or one or more LOS or LOF defects.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.7
zhoneVdslPerfDataSESs
Count of Severely Errored Seconds since the unit was last
reset.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.8
zhoneVdslPerfDataUASs
Count of Unavailable Seconds since the unit was last
reset.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.9
zhoneVdslPerfDataInits
Count of the line initialization attempts since the unit
was last reset. This count includes both successful and
failed attempts.
occurrencesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.10
zhoneVdslPerfDataCurr15MinTimeElapsed
Total elapsed seconds in this interval.
secondsInteger32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.11
zhoneVdslPerfDataCurr15MinLofs
Count of seconds during this interval that there
was Loss of Framing.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.12
zhoneVdslPerfDataCurr15MinLoss
Count of seconds during this interval that there
was Loss of Signal.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.13
zhoneVdslPerfDataCurr15MinLprs
Count of seconds during this interval that there
was Loss of Power.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.14
zhoneVdslPerfDataCurr15MinLols
Count of seconds during this interval that there
was Loss of Link.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.15
zhoneVdslPerfDataCurr15MinESs
Count of Errored Seconds during this interval. An Errored
Second is a one-second interval containing one or more CRC
anomalies, or one or more LOS or LOF defects.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.16
zhoneVdslPerfDataCurr15MinSESs
Count of Severely Errored Seconds during this interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.17
zhoneVdslPerfDataCurr15MinUASs
Count of Unavailable Seconds during this interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.18
zhoneVdslPerfDataCurr15MinInits
Count of the line initialization attempts during this
interval. This count includes both successful and
failed attempts.
occurrencesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.19
zhoneVdslPerfData1DayValidIntervals
Valid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.20
zhoneVdslPerfData1DayInvalidIntervals
Invalid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.21
zhoneVdslPerfDataCurr1DayTimeElapsed
Number of seconds that have elapsed since the beginning
of the current 1-day interval.
secondsInteger32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.22
zhoneVdslPerfDataCurr1DayLofs
Count of Loss of Framing (LOF) Seconds since the
beginning of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.23
zhoneVdslPerfDataCurr1DayLoss
Count of Loss of Signal (LOS) Seconds since the beginning
of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.24
zhoneVdslPerfDataCurr1DayLprs
Count of Loss of Power (LPR) Seconds since the beginning
of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.25
zhoneVdslPerfDataCurr1DayLols
Count of Loss of Link (LOL) Seconds since the beginning
of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.26
zhoneVdslPerfDataCurr1DayESs
Count of Errored Seconds (ES) since the beginning
of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.27
zhoneVdslPerfDataCurr1DaySESs
Count of Severely Errored Seconds (SES) since the
beginning of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.28
zhoneVdslPerfDataCurr1DayUASs
Count of Unavailable Seconds (UAS) since the beginning
of the current 1-day interval.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.29
zhoneVdslPerfDataCurr1DayInits
Count of the line initialization attempts since the
beginning of the current 1-day interval. This count
includes both successful and failed attempts.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.30
zhoneVdslPhyrRetransmittedCodewords
Retransmitted Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.31
zhoneVdslPhyrCorrectedRetransmittedCodewords
Retransmitted corrected Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.32
zhoneVdslPhyrUncorrectableRetransmittedCodewords
Retransmitted uncorrectable Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.33
zhoneVdslPhyrCurr15MinRetransmittedCodewords
Current 15 minutes Retransmitted Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.34
zhoneVdslPhyrCurr15MinCorrectedRetransmittedCodewords
Current 15 minutes Retransmitted Corrected Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.35
zhoneVdslPhyrCurr15MinUncorrectableRetransmittedCodewords
Current 15 minutes Retransmitted Uncorrectable Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.36
zhoneVdslPhyrCurr1DayRetransmittedCodewords
Current Day Retransmitted Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.37
zhoneVdslPhyrCurr1DayCorrectedRetransmittedCodewords
Current Day Retransmitted Corrected Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.38
zhoneVdslPhyrCurr1DayUncorrectableRetransmittedCodewords
Current Day Retransmitted Uncorrectable Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.39
zhoneVdslPhyrPrev1DayRetransmittedCodewords
Previous Day Retransmitted Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.40
zhoneVdslPhyrPrev1DayCorrectedRetransmittedCodewords
Previous Day Retransmitted Corrected Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.41
zhoneVdslPhyrPrev1DayUncorrectableRetransmittedCodewords
Previous Day Retransmitted Uncorrectable Codewords
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.42
zhoneVdslGinpLeftrSecs
LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.43
zhoneVdslGinpErrorFreeBits
errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.44
zhoneVdslGinpMinEftr
minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.45
zhoneVdslGinpCurr15MinLeftrSecs
LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the coun…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.46
zhoneVdslGinpCurr15MinErrorFreeBits
errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the current 15 minutes.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.47
zhoneVdslGinpCurr15MinMinEftr
minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the current 15 minutes.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.48
zhoneVdslGinpCurr1DayLeftrSecs
LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the coun…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.49
zhoneVdslGinpCurr1DayErrorFreeBits
errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the current day.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.50
zhoneVdslGinpCurr1DayMinEftr
minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the current day.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.51
zhoneVdslGinpPrev1DayLeftrSecs
LEFTRS - This counter counts the number of seconds that experienced a Low
Error Free Throughput Rate (LEFTR), i,e., seconds during which the Error
Free Throughput dropped below the configured threshold. This is the coun…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.52
zhoneVdslGinpPrev1DayErrorFreeBits
errorFreeBits - This counter counts the number of bits that crossed the
alpha1/beta1 interface (bits available to carry user payload). This is
the count for the previous day.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.53
zhoneVdslGinpPrev1DayMinEftr
minEFTR - This performance monitoring parameter records the lowest value
of Error Free Throughput during the current interval. This is the count
for the previous day.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.4.1.54

zhoneVdslPerfIntervalTable

table
.1.3.6.1.4.1.5504.5.13.1.1.5 · 1 row entry · 9 columns
Open in standard view 
This table provides one row for each Vtu performance
data collection interval.  VDSL physical interfaces are
          
those ifEntries where ifType is equal to vdsl(97).
zhoneVdslPerfIntervalEntry entry .1.3.6.1.4.1.5504.5.13.1.1.5.1
An entry in the vdslPerfIntervalTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide zhoneVdslPerfIntervalNumber
Column Syntax OID
zhoneVdslPerfIntervalNumber
Performance Data Interval number 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2 to 96 are optional.
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.1
zhoneVdslPerfIntervalLofs
Count of seconds in the interval when there was Loss
of Framing.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.2
zhoneVdslPerfIntervalLoss
Count of seconds in the interval when there was Loss
of Signal.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.3
zhoneVdslPerfIntervalLprs
Count of seconds in the interval when there was Loss
of Power.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.4
zhoneVdslPerfIntervalLols
Count of seconds in the interval when there was Loss
of Link.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.5
zhoneVdslPerfIntervalESs
Count of Errored Seconds (ES) in the interval. An Errored
Second is a one-second interval containing one or more CRC
anomalies, one or more LOS or LOF defects.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.6
zhoneVdslPerfIntervalSESs
Count of Severely Errored Seconds in the interval.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.7
zhoneVdslPerfIntervalUASs
Count of Unavailable Seconds in the interval.
secondsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.8
zhoneVdslPerfIntervalInits
Count of the line initialization attempts during this
interval. This count includes both successful and
failed attempts.
HC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.5.1.9

zhoneVdslPerf1DayIntervalTable

table
.1.3.6.1.4.1.5504.5.13.1.1.6 · 1 row entry · 10 columns
Open in standard view 
This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.
zhoneVdslPerf1DayIntervalEntry entry .1.3.6.1.4.1.5504.5.13.1.1.6.1
An entry in the vdslPerf1DayIntervalTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide zhoneVdslPerf1DayIntervalNumber
Column Syntax OID
zhoneVdslPerf1DayIntervalNumber
History Data Interval number. Interval 1 is the most
recent previous day; interval 30 is 30 days ago. Intervals
2 to 30 are optional.
Unsigned32
Constraints:
range: 1-30
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.1
zhoneVdslPerf1DayIntervalMoniSecs
The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring dat…
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.2
zhoneVdslPerf1DayIntervalLofs
Count of Loss of Frame (LOF) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.3
zhoneVdslPerf1DayIntervalLoss
Count of Loss of Signal (LOS) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.4
zhoneVdslPerf1DayIntervalLprs
Count of Loss of Power (LPR) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.5
zhoneVdslPerf1DayIntervalLols
Count of Loss of Link (LOL) Seconds during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.6
zhoneVdslPerf1DayIntervalESs
Count of Errored Seconds (ES) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.7
zhoneVdslPerf1DayIntervalSESs
Count of Severely Errored Seconds (SES) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.8
zhoneVdslPerf1DayIntervalUASs
Count of Unavailable Seconds (UAS) during the 1-day
interval as measured by vdslPerf1DayIntervalMoniSecs.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.9
zhoneVdslPerf1DayIntervalInits
Count of the line initialization attempts during the
1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
This count includes both successful and failed attempts.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.6.1.10

zhoneVdslChanPerfDataTable

table
.1.3.6.1.4.1.5504.5.13.1.1.7 · 1 row entry · 12 columns
Open in standard view 
This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where
ifType is equal to interleave(124) or fast(125).
zhoneVdslChanPerfDataEntry entry .1.3.6.1.4.1.5504.5.13.1.1.7.1
An entry in the vdslChanPerfDataTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide
Column Syntax OID
zhoneVdslChanValidIntervals
Valid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.1
zhoneVdslChanInvalidIntervals
Invalid Intervals per definition found in
HC-PerfHist-TC-MIB.
intervalsInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.2
zhoneVdslChanFixedOctets
Count of corrected octets since the unit was last reset.
octetsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.3
zhoneVdslChanBadBlks
Count of uncorrectable blocks since the unit was last
reset.
blocksSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.4
zhoneVdslChanCurr15MinTimeElapsed
Total elapsed seconds in this interval.
secondsInteger32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.5
zhoneVdslChanCurr15MinFixedOctets
Count of corrected octets in this interval.
octetsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.6
zhoneVdslChanCurr15MinBadBlks
Count of uncorrectable blocks in this interval.
blocksSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.7
zhoneVdslChan1DayValidIntervals
Valid Intervals per definition found in
HC-PerfHist-TC-MIB.
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.8
zhoneVdslChan1DayInvalidIntervals
Invalid Intervals per definition found in
HC-PerfHist-TC-MIB.
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.9
zhoneVdslChanCurr1DayTimeElapsed
Number of seconds that have elapsed since the beginning
of the current 1-day interval.
secondsInteger32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.10
zhoneVdslChanCurr1DayFixedOctets
Count of corrected octets since the beginning of the
current 1-day interval.
octetsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.11
zhoneVdslChanCurr1DayBadBlks
Count of uncorrectable blocks since the beginning of the
current 1-day interval.
blocksSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.7.1.12

zhoneVdslChanIntervalTable

table
.1.3.6.1.4.1.5504.5.13.1.1.8 · 1 row entry · 3 columns
Open in standard view 
This table provides one row for each Vtu channel data
collection interval.  VDSL channel interfaces are those
ifEntries where ifType is equal to interleave(124) or
fast(125).
zhoneVdslChanIntervalEntry entry .1.3.6.1.4.1.5504.5.13.1.1.8.1
An entry in the vdslChanIntervalTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide zhoneVdslChanIntervalNumber
Column Syntax OID
zhoneVdslChanIntervalNumber
Performance Data Interval number 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2 to 96 are optional.
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.5504.5.13.1.1.8.1.1
zhoneVdslChanIntervalFixedOctets
Count of corrected octets in this interval.
octetsHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.8.1.2
zhoneVdslChanIntervalBadBlks
Count of uncorrectable blocks in this interval.
blocksHC-PerfHist-TC-MIBHCPerfIntervalCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfIntervalCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.8.1.3

zhoneVdslChan1DayIntervalTable

table
.1.3.6.1.4.1.5504.5.13.1.1.9 · 1 row entry · 4 columns
Open in standard view 
This table provides one row for each VDSL performance
data collection interval.  This table contains live data
from equipment.  As such, it is NOT persistent.
zhoneVdslChan1DayIntervalEntry entry .1.3.6.1.4.1.5504.5.13.1.1.9.1
An entry in the vdslChan1DayIntervalTable.
Indexes
IF-MIBifIndex zhoneVdslPhysSide zhoneVdslChan1DayIntervalNumber
Column Syntax OID
zhoneVdslChan1DayIntervalNumber
History Data Interval number. Interval 1 is the most
recent previous day; interval 30 is 30 days ago. Intervals
2 to 30 are optional.
Unsigned32
Constraints:
range: 1-30
 .1.3.6.1.4.1.5504.5.13.1.1.9.1.1
zhoneVdslChan1DayIntervalMoniSecs
The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring dat…
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
Textual Convention: HC-PerfHist-TC-MIBHCPerfTimeElapsed Integer32
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.5504.5.13.1.1.9.1.2
zhoneVdslChan1DayIntervalFixedOctets
Count of corrected octets in this interval.
octetsHC-PerfHist-TC-MIBHCPerfCurrentCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.9.1.3
zhoneVdslChan1DayIntervalBadBlks
Count of uncorrectable blocks in this interval.
blocksHC-PerfHist-TC-MIBHCPerfCurrentCount
Textual Convention: HC-PerfHist-TC-MIBHCPerfCurrentCount Unsigned64
 .1.3.6.1.4.1.5504.5.13.1.1.9.1.4

zhoneVdslLineConfProfileTable

table
.1.3.6.1.4.1.5504.5.13.1.1.11 · 1 row entry · 154 columns
Open in standard view 
This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
          
Entries in this table MUST be maintained in a
persistent manner.
zhoneVdslLineConfProfileEntry entry .1.3.6.1.4.1.5504.5.13.1.1.11.1
Each entry consists of a list of parameters that
represents the configuration of a VDSL line.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific…
Indexes
IF-MIBifIndex
Column Syntax OID
zhoneVdslLineConfProfileName
This object identifies a row in this table.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
docu…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.1
zhoneVdslLineConfDownRateMode
Specifies the rate selection behavior for the line
in the downstream direction.

manual(1) forces the rate to the configured rate
adaptAtInit(2) adapts the line at initialization only
dynamic(3) …
Enumerationr/w
Enumerated Values:
1manual
2adapt-at-init
3dynamic
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.2
zhoneVdslLineConfUpRateMode
Specifies the rate selection behavior for the line
in the upstream direction.

manual(1) forces the rate to the configured rate
adaptAtInit(2) adapts the line at initialization only
dynamic(3) …
Enumerationr/w
Enumerated Values:
1manual
2adapt-at-init
3dynamic
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.3
zhoneVdslLineConfDownMaxPwr
Specifies the maximum aggregate downstream power
level in the range -5.0 to 20.0 dBm.
0.10dBmInteger32r/w
Constraints:
range: -50-200
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.4
zhoneVdslLineConfUpMaxPwr
Specifies the maximum aggregate upstream power
level in the range -13.0 to 20.0 dBm.
0.10dBmInteger32r/w
Constraints:
range: -130-200
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.5
zhoneVdslLineConfDownMaxSnrMgn
Specifies the maximum downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.6
zhoneVdslLineConfDownMinSnrMgn
Specifies the minimum downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.7
zhoneVdslLineConfDownTargetSnrMgn
Specifies the target downstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
This is the Noise Margin the transceivers must achieve
with a BER of 10^-7 or better to successfully complete
initial…
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.8
zhoneVdslLineConfUpMaxSnrMgn
Specifies the maximum upstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.9
zhoneVdslLineConfUpMinSnrMgn
Specifies the minimum upstream Signal/Noise Margin
in units of 0.10 dB, for a range of 0 to 31.0 dB.
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.10
zhoneVdslLineConfUpTargetSnrMgn
Specifies the target upstream Signal/Noise Margin in
units of 0.10 dB, for a range of 0 to 31.0 dB. This
is the Noise Margin the transceivers must achieve with
a BER of 10^-7 or better to successfully complete
initiali…
0.10dBmUnsigned32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.11
zhoneVdslLineConfDownFastMaxDataRate
Specifies the maximum downstream fast channel
data rate in steps of 1000 bits/second.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.12
zhoneVdslLineConfDownFastMinDataRate
Specifies the minimum downstream fast channel
data rate in steps of 1000 bits/second.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.13
zhoneVdslLineConfDownSlowMaxDataRate
Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.

The maximum aggregate downstream transmit speed
of the line can be derived from the sum of maximum
downstream fast and…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.14
zhoneVdslLineConfDownSlowMinDataRate
Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.

The minimum aggregate downstream transmit speed
of the line can be derived from the sum of minimum
downstream fast and…
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.15
zhoneVdslLineConfUpFastMaxDataRate
Specifies the maximum upstream fast channel
data rate in steps of 1000 bits/second.

The maximum aggregate upstream transmit speed
of the line can be derived from the sum of maximum
upstream fast and slow …
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.16
zhoneVdslLineConfUpFastMinDataRate
Specifies the minimum upstream fast channel
data rate in steps of 1000 bits/second.

The minimum aggregate upstream transmit speed
of the line can be derived from the sum of minimum
upstream fast and slow …
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.17
zhoneVdslLineConfUpSlowMaxDataRate
Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.18
zhoneVdslLineConfUpSlowMinDataRate
Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second.
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.19
zhoneVdslLineConfDownRateRatio
For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is controlled by the object. This object specifies
the ratio of the allocation of the excess data …
percentUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.20
zhoneVdslLineConfUpRateRatio
For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is controlled by the object. This object specifies
the ratio of the allocation of the excess data …
percentUnsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.21
zhoneVdslLineConfDownMaxInterDelay
Specifies the maximum interleave delay for the
downstream slow channel.
millisecondsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.22
zhoneVdslLineConfUpMaxInterDelay
Specifies the maximum interleave delay for the
upstream slow channel.
millisecondsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.23
zhoneVdslLineConfDownPboControl
Downstream power backoff (PBO) control for this
line. For transceivers which do not support downstream
PBO control, this object MUST be fixed at disabled(1).
If auto(2) is selected, the transceiver will automatically
a…
Enumerationr/w
Enumerated Values:
1disabled
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.24
zhoneVdslLineConfUpPboControl
Upstream power backoff (PBO) control for this
line. For transceivers which do not support upstream
PBO control, this object MUST be fixed at disabled(1).
If auto(2) is selected, the transceiver will automatically
adjus…
Enumerationr/w
Enumerated Values:
1disabled
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.25
zhoneVdslLineConfDownPboLevel
Specifies the downstream backoff level to be used
when vdslLineConfDownPboControl = manual(3).
0.25dBUnsigned32r/w
Constraints:
range: 0-160
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.26
zhoneVdslLineConfUpPboLevel
Specifies the upstream backoff level to be used
when vdslLineConfUpPboControl = manual(3).
0.25dBUnsigned32r/w
Constraints:
range: 0-160
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.27
zhoneVdslLineConfDeploymentScenario
The VDSL line deployment scenario. When using
fttCab(1), the VTU-C is located in a street cabinet.
When using fttEx(2), the VTU-C is located at the
central office. Changes to this value will have
no effect on the tran…
Enumerationr/w
Enumerated Values:
1fttCab
2fttEx
3other
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.28
zhoneVdslLineConfAdslPresence
Indicates presence of ADSL service in the associated
cable bundle/binder.

none(1) indicates no ADSL service in the bundle
adslOverPots(2) indicates ADSL service over POTS is
presen…
Enumerationr/w
Enumerated Values:
1none
2adslOverPots
3adslOverISDN
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.29
zhoneVdslLineConfApplicableStandard
The VDSL standard to be used for the line.

ansi(1) indicates ANSI standard
etsi(2) indicates ETSI standard
itu(3) indicates ITU standard
other(4) indicates a standard other than the ab…
Enumerationr/w
Enumerated Values:
1ansi
2etsi
3itu
4other
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.30
zhoneVdslLineConfBandPlan
The VDSL band plan to be used for the line.

bandPlan997(1) is to be used for
ITU-T G.993.1 Bandplan-B
ETSI Bandplan
ANSI Plan 997

bandPlan998(2) is to be used for
ITU-T …
Enumerationr/w
Enumerated Values:
1bandPlan997
2bandPlan998
3bandPlanFx
4other
5bandPlan997-2
6bandPlan997-3
7bandPlan998-2
8bandPlan998-3
9bandPlan998-17-6
10fx-2
11fx-3
12china-a-2
13china-a-3
14china-b-2
15china-b-3
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.31
zhoneVdslLineConfBandPlanFx
The frequency limit between bands D2 and U2 when
zhoneVdslLineConfBandPlan is set to bandPlanFx(3).
kHzUnsigned32r/w
Constraints:
range: 3750-12000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.32
zhoneVdslLineConfBandOptUsage
Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).

unused(1) indicates Opt is unused
upstream(2) indicates Opt usage is for upstream
downstream(3) indicates Opt usage …
Enumerationr/w
Enumerated Values:
1unused
2upstream
3downstream
4upstream-forced
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.33
zhoneVdslLineConfUpPsdTemplate
This object has been modified by Zhone.

The upstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PSD within the internationally
standa…
Enumerationr/w
Enumerated Values:
3ansi-fftex-m1
4ansi-fftex-m2
5ansi-fftcab-m1
6fftcab-m2
7etsi-m1
8etsi-m2
9psd-custom
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.34
zhoneVdslLineConfDownPsdTemplate
This object has been modified by Zhone.

The downstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PSD within the internationally
stan…
Enumerationr/w
Enumerated Values:
3ansi-fftex-m1
4ansi-fftex-m2
5ansi-fftcab-m1
6fftcab-m2
7fftcab-m1-adsl
8fftcab-m1-adslplus
9fftcab-m2-adsl
10fftcab-m2-adslplus
11etsi-pexp1-m1
12etsi-pexp1-m2
13etsi-pexp2-m1
14etsi-pexp2-m2
15psd-custom
16etsi-pexm2-sample1
17etsi-pexm2-sample2
18etsi-pexm2-sample3
19etsi-pexm2-sample4
20etsi-pcab-m1
21etsi-pcab-m2
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.35
zhoneVdslLineConfHamBandMask
The transmit power spectral density mask code, used
to avoid interference with HAM (Handheld Amateur Radio)
radio bands by introducing power control (notching) in one
or more of these bands.

Amateur radio…
Bitsr/w
Enumerated Values:
0customNotch1
1customNotch2
2amateurBand30m
3amateurBand40m
4amateurBand80m
5amateurBand160m
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.36
zhoneVdslLineConfCustomNotch1Start
Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Start MUST
be less than or equal to vdslLineConfCustomNotch1Stop.
kHzSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.37
zhoneVdslLineConfCustomNotch1Stop
Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 1. zhoneVdslLineConfCustomNotch1Stop MUST
be greater than or equal to vdslLineConfCustomNotch1Start.
kHzSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.38
zhoneVdslLineConfCustomNotch2Start
Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Start MUST
be less than or equal to vdslLineConfCustomNotch2Stop.
kHzSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.39
zhoneVdslLineConfCustomNotch2Stop
Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 2. zhoneVdslLineConfCustomNotch2Stop MUST
be greater than or equal to vdslLineConfCustomNotch2Start.
kHzSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.40
zhoneVdslLineConfDownTargetSlowBurst
Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
microsecondsUnsigned32r/w
Constraints:
range: 0-1275
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.41
zhoneVdslLineConfUpTargetSlowBurst
Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
microsecondsUnsigned32r/w
Constraints:
range: 0-1275
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.42
zhoneVdslLineConfDownMaxFastFec
This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a fast channel.
%Unsigned32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.43
zhoneVdslLineConfUpMaxFastFec
This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a fast channel.
%Unsigned32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.44
zhoneVdslLineConfLineType
This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be
channelized, i.e., which channel type(s) are supported.
If the line is to be channelized, the value will be oth…
Enumerationr/w
Enumerated Values:
1noChannel
2fastOnly
3interleavedOnly
4fastOrInterleaved
5fastAndInterleaved
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.45
zhoneVdslLineConfProfRowStatus
This object is used to create a new row or modify or
delete an existing row in this table.

A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profil…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.47
zhoneVdslLineConfTransmissionMode
The transmission standard to be used for the line.
Enumerationr/w
Enumerated Values:
1autoNegotiateMode
2vdslMode
3vdsl2Mode
4adsl2PlusMode
5adsl2Mode
6gdmtMode
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.48
zhoneVdslLineConfVdsl2Profile
The VDSL2 standard to be used for the line.
Enumerationr/w
Enumerated Values:
1g993-2-8a
2g993-2-8b
3g993-2-8c
4g993-2-8d
5g993-2-12a
6g993-2-12b
7g993-2-17a
8g993-2-30a
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.49
zhoneVdslLineConfVdslMode
Controls which VDSL modes are available on the line.
Enumerationr/w
Enumerated Values:
1standard
2long-reach-8k
3r8k
4std-8k
5lr-8k
6std-lr
7std-lr-8k
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.50
zhoneVdslLineConfPboElectricalOverride
Override electrical length estimated by VUTU_C.
The special value 256 means do not perform
override.
.5 dBm/MhzInteger32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.51
zhoneVdslLineConfAutoModeCrtrn
Determines the policy to select optimal mode of oepration.
Enumerationr/w
Enumerated Values:
1crtrn-chip-prop
2optimize-us
3optimize-ds
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.52
zhoneVdslLineConfNetworkTimingRef
Enable/disable reference clock source.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.53
zhoneVdslLineConfAdslBandMode
Specifies whether the XDSL can use the ADSL spectrum or not.
Enumerationr/w
Enumerated Values:
1allowed
2not-allowed
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.54
zhoneVdslLineConfAdslBandModeEndFreq
Specifies the ADSL band end frequency when
the ADSL band usage is not allowed.
kHzInteger32r/w
Constraints:
range: 276-2208
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.55
zhoneVdslLineConfSeltEchoMeasurementTime
Contains the SELT echo measurement time
secsInteger32r/w
Constraints:
range: 5-240
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.56
zhoneVdslLineConfSeltNoiseMeasurementTime
Contains the SELT noise measurement time.
secsInteger32r/w
Constraints:
range: 5-240
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.57
zhoneVdslLineConfSeltAgc
Contains the SELT AGC gain value.
1 dBmInteger32r/w
Constraints:
range: -100-100
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.58
zhoneVdslLineConfDownTrellis
Enables/disables downstream Trellis coding.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.59
zhoneVdslLineConfUpTrellis
Enables/disables upstream Trellis coding.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.60
zhoneVdslLineConfDownMaxAggregateTxPwr
Maximum total power that is allowed to be transmitted
in the downstream direction.
Enumerationr/w
Enumerated Values:
4unlimited
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.61
zhoneVdslLineConfUpMaxAggregateTxPwr
Maximum total power that is allowed to be transmitted
in the upstream direction.
Enumerationr/w
Enumerated Values:
4unlimited
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.62
zhoneVdslLineConfDownMaxPsd
The maximum power spectral density level
allowed on the line at the transmitter
output downstream for initialization and
showtime signals.
.1 dBm/HzInteger32r/w
Constraints:
range: -955-0
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.63
zhoneVdslLineConfUpMaxPsd
The maximum power spectral density level
allowed on the line at the transmitter
output upstream for initialization and
showtime signals.
.1 dBm/HzInteger32r/w
Constraints:
range: -955-0
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.64
zhoneVdslLineConfDownPsdShape
Maximum transmit PSD allowed in the downstream
channel on a VDSL2 line.
Enumerationr/w
Enumerated Values:
1custom-psd
2region-a-psd
3region-c-psd
4region-b-m1-a-psd
5region-b-m1-b-psd
6region-b-m1-us0-psd
7region-b-m2-a-psd
8region-b-m2-m-psd
9region-b-m2-b-psd
10region-b-m2-us0-psd
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.65
zhoneVdslLineConfUpPsdShape
Maximum transmit PSD allowed in the upstream
channel on a VDSL2 line.
Enumerationr/w
Enumerated Values:
1custom-psd
2region-a-psd
3region-c-psd
4region-b-m1-a-psd
5region-b-m1-b-psd
6region-b-m1-us0-psd
7region-b-m2-a-psd
8region-b-m2-m-psd
9region-b-m2-b-psd
10region-b-m2-us0-psd
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.66
zhoneVdslLineConfDownVirtualNoiseSnrMode
Downstream virtual noise SNR mode on a VDSL2
line.
Enumerationr/w
Enumerated Values:
1mode1
2mode2
3mode3
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.67
zhoneVdslLineConfUpVirtualNoiseSnrMode
Upstream virtual noise SNR mode on a VDSL2
line.
Enumerationr/w
Enumerated Values:
1mode1
2mode2
3mode3
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.68
zhoneVdslLineConfDownErasureDetectionFast
Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream fast channel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.69
zhoneVdslLineConfUpErasureDetectionFast
Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream fast channel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.70
zhoneVdslLineConfDownErasureDetectionInterleave
Indicates whether the erasure detection
mechanism should be enabled or disabled in
the downstream slow channel (interleave).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.71
zhoneVdslLineConfUpErasureDetectionInterleave
Indicates whether the erasure detection
mechanism should be enabled or disabled in
the uptream slow channel (interleave).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.72
zhoneVdslLineConfDownGhsA43TonePwr
Determines the mode of the downstream tones
power used during handshake, during A43
mode.
Enumerationr/w
Enumerated Values:
1default
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.73
zhoneVdslLineConfDownGhsB43TonePwr
Determines the mode of the downstream tones
power used during handshake, during B43
mode.
Enumerationr/w
Enumerated Values:
1default
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.74
zhoneVdslLineConfDownGhsA43cTonePwr
Determines the mode of the downstream tones
power used during handshake, during A43c
mode.
Enumerationr/w
Enumerated Values:
1default
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.75
zhoneVdslLineConfDownGhsV43TonePwr
Determines the mode of the downstream tone
power used during handshake, during V43
mode.
Enumerationr/w
Enumerated Values:
1default
2auto
3manual
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.76
zhoneVdslLineConfDownGhsA43TonePwrMaxLvl
Determines the maximum power of downstream
tones used, in manual mode, during handshake
in A43 mode. A value of -99 indicates no
power used.
0.5 dBm/HzInteger32r/w
Constraints:
range: -99--40
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.77
zhoneVdslLineConfDownGhsB43TonePwrMaxLvl
Determines the maximum power of downstream
tones used, in manual mode, during handshake
in B43 mode. A value of -99 indicates no
power used.
0.5 dBm/HzInteger32r/w
Constraints:
range: -99--40
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.78
zhoneVdslLineConfDownGhsA43cTonePwrMaxLvl
Determines the maximum power of downstream
tones used, in manual mode, during handshake
in A43c mode. A value of -99 indicates no
power used.
0.5 dBm/HzInteger32r/w
Constraints:
range: -99--40
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.79
zhoneVdslLineConfDownGhsV43TonePwrMaxLvl
Determines the maximum power of downstream
tones used, in manual mode, during handshake
in V43 mode. A value of -99 indicates no
power used.
0.5 dBm/HzInteger32r/w
Constraints:
range: -99--40
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.80
zhoneVdslLineConfDownRsCoding
Parameter to enable/disable RS Coding in
downstream channel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.81
zhoneVdslLineConfUpRsCoding
Parameter to enable/disable RS Coding in
upsream channel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.82
zhoneVdslLineConfUpPboPsdTemplate
Specifies the maximum received PSD allowed
in the upstream channel on the VDSLx line.
Enumerationr/w
Enumerated Values:
1ansi-a
2ansi-f
3etsi-a
4etsi-b
5etsi-c
6etsi-d
7etsi-e
8etsi-f
9custom
10ab-param
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.83
zhoneVdslLineConfUpPboPsdParamA1
Upstream power backoff PSD parameter A1. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 4000-8589
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.84
zhoneVdslLineConfUpPboPsdParamA2
Upstream power backoff PSD parameter A2. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 4000-8589
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.85
zhoneVdslLineConfUpPboPsdParamB1
Upstream power backoff PSD parameter B1. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 0-8589
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.86
zhoneVdslLineConfUpPboPsdParamB2
Upstream power backoff PSD parameter B2. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 0-8589
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.87
zhoneVdslLineConfDownDownshiftSnrMgn
Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.88
zhoneVdslLineConfDownUpshiftSnrMgn
Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.89
zhoneVdslLineConfDownMinDownshiftTime
Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
secondsInteger32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.90
zhoneVdslLineConfDownMinUpshiftTime
Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
secondsInteger32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.91
zhoneVdslLineConfUpDownshiftSnrMgn
Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.92
zhoneVdslLineConfUpUpshiftSnrMgn
Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.93
zhoneVdslLineConfUpMinDownshiftTime
Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
secondsInteger32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.94
zhoneVdslLineConfUpMinUpshiftTime
Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
secondsInteger32r/w
Constraints:
range: 0-16383
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.95
zhoneVdslLineConfDownMinTxThresholdAlarm
Minimum CO Tx Sync rate threshold alarm. If set to 0,
this field is disregarded. Otherwise, if Tx Sync
rate falls below this value, a trap and alarm will
be issued
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.96
zhoneVdslLineConfUpMinTxThresholdAlarm
Minimum CPE Tx Sync rate threshold alarm. If set to 0,
this field is disregarded. Otherwise, if Tx Sync
rate falls below this value, a trap and alarm will
be issued
kbpsUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.97
zhoneVdslLineConfPotsBypassRelayMaxDuration
The maximum duration in seconds that an Adsl Pots Low
Pass Filter Bypass Relay will remain active (meaning
closed/energized). As a fail-safe mechanism, the relay
will automatically return a line back to normal
operation…
secsInteger32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.98
zhoneVdslLineConfDMTConfMode
Discrete Multi-Tone parameter that selects whether there
is overlap (echoCancel) or no overlap (freqDivMux) of bins.
Enumerationr/w
Enumerated Values:
1echocancel
2freqdivmux
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.99
zhoneVdslLineConfDownBitSwap
Enable or disable downstream bit swap.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.100
zhoneVdslLineConfUpBitSwap
Enable or disable upstream bit swap.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.101
zhoneVdslLineConfAdslAnnexMModeEnabled
This object indicates whether Annex-M mode is enabled
on the Adsl modem. If this object is set to 'true' then
Annex-M mode is enabled. If it is set to 'false then
Annex-M mode is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.102
zhoneVdslLineConfAdslAnnexMPsdMask
This object specifies the maximum transmit PSD
allowed in the downstream channel on an BIS
Annex-M line.
Enumerationr/w
Enumerated Values:
1eu64
2eu60
3eu56
4eu52
5eu48
6eu44
7eu40
8eu36
9eu32
10all
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.103
zhoneVdslLineConfUs0BoundaryTone
This object configures the upper boundary of US0.
US0 is used in long reach mode when there is no more
capacity in US1. The switchover is typically around
3500 feet.
Enumerationr/w
Enumerated Values:
1d32
2d36
3d40
4d44
5d48
6d52
7d56
8d64
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.104
zhoneVdslLineConfDownInp
The minimum impulse noise protection for the downstream
bearer channel expressed in symbols. One symbol equals
250 uS.
Enumerationr/w
Enumerated Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5threeSymbols
6fourSymbols
7fiveSymbols
8sixSymbols
9sevenSymbols
10eightSymbols
11nineSymbols
12tenSymbols
13elevenSymbols
14twelveSymbols
15thirteenSymbols
16fourteenSymbols
17fifteenSymbols
18sixteenSymbols
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.105
zhoneVdslLineConfUpInp
The minimum impulse noise protection for the upstream
bearer channel expressed in symbols. One symbol equals
250 uS.
Enumerationr/w
Enumerated Values:
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5fourSymbols
6eightSymbols
7sixteenSymbols
8threeSymbols
9fiveSymbols
10sixSymbols
11sevenSymbols
12nineSymbols
13tenSymbols
14elevenSymbols
15twelveSymbols
16thirteenSymbols
17fourteenSymbols
18fifteenSymbols
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.106
zhoneVdslLineConfDownMaxInterleavingDelay
The maximum inteleaving delay in the downstream direction.
A value of zero indicates no delay introduced.
millisecondsInteger32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.107
zhoneVdslLineConfUpMaxInterleavingDelay
The maximum inteleaving delay in the upstream direction.
A value of zero indicates no delay introduced.
millisecondsInteger32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.108
zhoneVdslLineConfDownPsdMaskEnable
This object selects the Psd Mask in the downstream direction.

'standard' : use the PSD Mask specified in the object
zhoneVdslLineConfDownPsdSelect

'mod' : use the pr…
Enumerationr/w
Enumerated Values:
2standard
3mod
4modFallback
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.109
zhoneVdslLineConfUpPsdMaskEnable
This object selects the Psd Mask in the upstream direction.

'standard' : use the PSD Mask specified in the object
zhoneVdslLineConfDownPsdSelect

'mod' : use the pre-…
Enumerationr/w
Enumerated Values:
2standard
3mod
4modFallback
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.110
zhoneVdslLineConfDownPsdMaskSelect
This object selects one of the standards based PSD mask for the
downstream direction. The object zhoneVdslLineConfDownPsdMaskEnable
must be set to 'standard' for this object to be active.
Enumerationr/w
Enumerated Values:
1custom
2customMOD
3dmtPSDCOMSK2
4dmtPSDFLATMSK
5dmtPSDCABMSK2
6dmtPSDCOMSK2RFI
7dmtPSDFLATMSKRFI
8dmtPSDCABMSK2RFI
9dmtPSDADSL2NONOVLPM1
10dmtPSDADSL2NONOVLPM2
11dmtPSDADSL2NONOVLPFLAT
12g993RegionC
13g993RegionA
14g993RegionA-E17a-D-32
15g993RegionA-E17a-D-48
16g993RegionA-E17a-D-64
17g993RegionA-E17a-D-128
18g998RegionB-M1x-A
19g998RegionB-M1x-B
20g998RegionB-M1x-NUS0
21g998RegionB-M2x-A
22g998RegionB-M2x-M
23g998RegionB-M2x-B
24g998RegionB-M2x-NUS0
25g998RegionB-E17-M2x-NUS0
26g998RegionB-E17-M2x-NUS0-M
27g998RegionB-ADE17-M2x-NUS0-M
28g998RegionB-ADE17-M2x-A
29g998RegionB-ADE17-M2x-B
30g998RegionB-E30-M2x-NUS0
31g998RegionB-E30-M2x-NUS0-M
32g998RegionB-ADE30-M2x-NUS0-M
33g998RegionB-ADE30-M2x-NUS0-A
34g998RegionB-NONSTD-E17-M2x
35g998RegionB-NONSTD-E17-M2x-M
36g997RegionB-M1c-A-7
37g997RegionB-M1x-M-8
38g997RegionB-M1x-M
39g997RegionB-M2x-M-8
40g997RegionB-M2x-A
41g997RegionB-M2x-M
42g997RegionB-HPE17-M1-NUS0
43g997RegionB-HPE30-M1-NUS0
44g997RegionB-E17-M2x-A
45g997RegionB-E30-M2x-NUS0
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.111
zhoneVdslLineConfUpPsdMaskSelect
This object selects one of the standards based PSD mask for the
upstream direction. The object zhoneVdslLineConfUpPsdMaskEnable
must be set to 'standard' for this object to be active.
Enumerationr/w
Enumerated Values:
1custom
2g993J-ADLU-32
3g993J-ADLU-36
4g993J-ADLU-40
5g993J-ADLU-44
6g993J-ADLU-48
7g993J-ADLU-52
8g993J-ADLU-60
9g993J-ADLU-64
10g993JM-EU-32
11g993JM-EU-36
12g993JM-EU-40
13g993JM-EU-44
14g993JM-EU-48
15g993JM-EU-52
16g993JM-EU-60
17g993JM-EU-64
18dmtExtended
19dmtJJ100
20dmtStandard
21g993RegionA-EU-32
22g993RegionA-EU-36
23g993RegionA-EU-40
24g993RegionA-EU-44
25g993RegionA-EU-48
26g993RegionA-EU-52
27g993RegionA-EU-56
28g993RegionA-EU-60
29g993RegionA-EU-64
30g998RegionB-M1x-A
31g998RegionB-M1x-B
32g998RegionB-M1x-NUS0
33g998RegionB-M2x-A
34g998RegionB-M2x-M
35g998RegionB-M2x-B
36g998RegionB-M2x-NUS0
37g998RegionB-E17-M2x-NUS0
38g998RegionB-E17-M2x-NUS0-M
39g998RegionB-ADE17-M2x-NUS0-M
40g998RegionB-ADE17-M2x-A
41g998RegionB-ADE17-M2x-B
42g998RegionB-E30-M2x-NUS0
43g998RegionB-E30-M2x-NUS0-M
44g998RegionB-ADE30-M2x-NUS0-M
45g998RegionB-ADE30-M2x-NUS0-A
46g998RegionB-NONSTD-E17-M2x
47g998RegionB-NONSTD-E17-M2x-M
48g997RegionB-M1c-A-7
49g997RegionB-M1x-M-8
50g997RegionB-M1x-M
51g997RegionB-M2x-M-8
52g997RegionB-M2x-A
53g997RegionB-M2x-M
54g997RegionB-HPE17-M1-NUS0
55g997RegionB-HPE30-M1-NUS0
56g997RegionB-E17-M2x-A
57g997RegionB-E30-M2x-NUS0
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.112
zhoneVdslLineEnableTrellisCoding
Enables/disables Trellis coding.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.113
zhoneVdslLineEnableRsCoding
Enables/disables Rs coding.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.114
zhoneVdslLineConfPsdShape
Maximum transmit PSD allowed on a VDSL2 line.
Enumerationr/w
Enumerated Values:
1region-a-nus0
2region-a-eu-32
3region-a-eu-36
4region-a-eu-40
5region-a-eu-44
6region-a-eu-48
7region-a-eu-52
8region-a-eu-56
9region-a-eu-60
10region-a-eu-64
11region-a-eu-128
12region-a-adlu-32
13region-a-adlu-36
14region-a-adlu-40
15region-a-adlu-44
16region-a-adlu-48
17region-a-adlu-52
18region-a-adlu-56
19region-a-adlu-60
20region-a-adlu-64
21region-a-adlu-128
22region-b-998-m1x-a
23region-b-998-m1x-b
24region-b-998-m1x-nus0
25region-b-998-m2x-a
26region-b-998-m2x-m
27region-b-998-m2x-b
28region-b-998-m2x-nus0
29region-b-998-e17-m2x-nus0
30region-b-998-e17-m2x-nus0-m
31region-b-998-ade17-m2x-nus0-m
32region-b-998-ade17-m2x-a
33region-b-998-ade17-m2x-b
34region-b-998-e30-m2x-nus0
35region-b-998-e30-m2x-nus0-m
36region-b-998-ade30-m2x-nus0-m
37region-b-998-ade30-m2x-nus0-a
38region-b-997-m1c-a-7
39region-b-997-m1x-m-8
40region-b-997-m1x-m
41region-b-997-m2x-m-8
42region-b-997-m2x-a
43region-b-997-m2x-m
44region-b-997-hpe17-m1-nus0
45region-b-997-hpe30-m1-nus0
46region-b-997-e17-m2x-a
47region-b-997-e30-m2x-nus0
48region-b-997-bt-anfp
49region-c-138-b
50region-c-276-b
51region-c-138-co
52region-c-276-co
53region-c-tcmisdn
54region-c-1104-co-17a
55region-c-1104-co-30a
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.115
zhoneVdslLineConfDownPhyRSupport
Enable or disable downstream PHYR.
Only supported by Broadcom PHYR ports.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.116
zhoneVdslLineConfUpPhyRSupport
Enable or disable upstream PHYR.
Only supported by Broadcom PHYR ports.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.117
zhoneVdslLineConfDownPhyRmaxINP
PHYR maximum downstream impulse noise protection.

A value of 0 specifies no protection.

The values 5 through 160 specify the number of
symbols in 1/10 increments.

On…
Integer32r/w
Constraints:
range: 0-0
range: 5-160
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.118
zhoneVdslLineConfUpPhyRmaxINP
PHYR maximum upstream impulse noise protection.

A value of 0 specifies no protection.

The values 5 through 160 specify the number of
symbols in 1/10 increments.

Only…
Integer32r/w
Constraints:
range: 0-0
range: 5-160
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.119
zhoneVdslLineConfDownPhyRminRSoverhead
PHYR minimum downstream RS overhead.
Only supported by Broadcom PHYR ports.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.120
zhoneVdslLineConfUpPhyRminRSoverhead
PHYR minimum upstream RS overhead.
Only supported by Broadcom PHYR ports.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.121
zhoneVdslLineConfDownPhyRRtxRatio
PHYR minimum downstream fraction of the
line rate allocated for retransmission.
Only supported by Broadcom PHYR ports.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.122
zhoneVdslLineConfUpPhyRRtxRatio
PHYR minimum upstream fraction of the
line rate allocated for retransmission.
Only supported by Broadcom PHYR ports.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.123
zhoneVdslLineConfUpPboPsdParamA3
Upstream power backoff PSD parameter A3. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 4000-8096
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.124
zhoneVdslLineConfUpPboPsdParamA4
Upstream power backoff PSD parameter A4. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 4000-8096
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.125
zhoneVdslLineConfUpPboPsdParamB3
Upstream power backoff PSD parameter B3. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.126
zhoneVdslLineConfUpPboPsdParamB4
Upstream power backoff PSD parameter B4. This
parameter is only used if the mask selection
is set to PSDMaskABParameters
.01 dBm/HzInteger32r/w
Constraints:
range: 0-4096
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.127
zhoneVdslLineConfFallbackDefaultVpi
ATM VPI to be used by the line when it trains
in ADSL/ATM mode and bridges are configured for
single-vc mode
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.128
zhoneVdslLineConfFallbackDefaultVci
ATM VCI to be used by the line when it trains
in ADSL/ATM mode and bridges are configured for
single-vc mode
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.129
zhoneVdslLineConfDownGinpSupport
Enable or disable downstream G.INP / ITU-G.998.4.
Only supported by Broadcom ports.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.130
zhoneVdslLineConfUpGinpSupport
Enable or disable upstream G.INP / ITU-G.998.4.
Only supported by Broadcom ports.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.131
zhoneVdslLineConfDownGinpEtrMax
gInpEtrMax - Maximum allowed value for downstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the maximum net data rate
specified in the a…
kbpsUnsigned32r/w
Constraints:
range: 64-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.132
zhoneVdslLineConfUpGinpEtrMax
gInpEtrMax - Maximum allowed value for upstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the maximum net data rate
specified in the ass…
kbpsUnsigned32r/w
Constraints:
range: 64-2000000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.133
zhoneVdslLineConfDownGinpEtrMin
gInpEtrMin - Minimum allowed value for downstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the minimum net data rate specified
in the ass…
kbpsUnsigned32r/w
Constraints:
range: 64-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.134
zhoneVdslLineConfUpGinpEtrMin
gInpEtrMin - Minimum allowed value for upstream expected throughput
(ETR) in kbit/s. The valid values are all multiples of 8 from 0 to
the maximum of the valid values of the minimum net data rate specified
in the assoc…
kbpsUnsigned32r/w
Constraints:
range: 64-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.135
zhoneVdslLineConfDownGinpNdrMax
gInpNdrMax - Maximum allowed value for downstream net data rate (NDR)
in kbit/s. The valid values are all multiples of 8 from 0 to the
maximum of the valid values of the maximum net data rate specified
in the associat…
kbpsUnsigned32r/w
Constraints:
range: 64-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.136
zhoneVdslLineConfUpGinpNdrMax
gInpNdrMax - Maximum allowed value for upstream net data rate (NDR)
in kbit/s. The valid values are all multiples of 8 from 0 to the
maximum of the valid values of the maximum net data rate specified
in the associated…
kbpsUnsigned32r/w
Constraints:
range: 64-200000
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.137
zhoneVdslLineConfDownGinpShineRatio
gInpShineRatio - The downstream loss of rate in a 1 second interval
expressed as a fraction of NDR due to a single high impulse noise
event (SHINE) impulse noise environment expected by the operator
to occur at a pro…
ratioUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.138
zhoneVdslLineConfUpGinpShineRatio
gInpShineRatio - The upstream loss of rate in a 1 second interval
expressed as a fraction of NDR due to a single high impulse noise
event (SHINE) impulse noise environment expected by the operator
to occur at a proba…
ratioUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.139
zhoneVdslLineConfDownGinpLeftrThreshold
gInpLeftrThreshold - The downstream rate Threshold below which the
Low Error Free Rate (LEFTR) defect is declared. The threshold used
to declare leftr defects is expressed in fraction of the net data
rate (NDR). The …
ratioUnsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.140
zhoneVdslLineConfUpGinpLeftrThreshold
gInpLeftrThreshold - The upstream rate Threshold below which the
Low Error Free Rate (LEFTR) defect is declared. The threshold used
to declare leftr defects is expressed in fraction of the net data
rate (NDR). The va…
ratioUnsigned32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.141
zhoneVdslLineConfDownGinpMaxDelay
gInpMaxDelay - The maximum downstream delay in ms. This is the upper
limit for the delay that is added to the transmission delay only caused
by retransmissions. Here the receiver and/or the transmitter shall
identify…
mSecsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.142
zhoneVdslLineConfUpGinpMaxDelay
gInpMaxDelay - The maximum upstream delay in ms. This is the upper
limit for the delay that is added to the transmission delay only caused
by retransmissions. Here the receiver and/or the transmitter shall
identify a…
mSecsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.143
zhoneVdslLineConfDownGinpMinDelay
gInpMinDelay - The minimum downstream delay in ms. This is the lower
limit for the delay that is added to the transmission delay caused by
retransmissions only. The time stamp shall be used by the outlet shaping
func…
mSecsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.144
zhoneVdslLineConfUpGinpMinDelay
gInpMinDelay - The minimum upstream delay in ms. This is the lower
limit for the delay that is added to the transmission delay caused by
retransmissions only. The time stamp shall be used by the outlet shaping
functi…
mSecsUnsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.145
zhoneVdslLineConfDownGinpMin
ginpMin - The minimum downstream impulse noise protection (INP) against
single high impulse noise event (SHINE) in discrete multitone (DMT)
symbols. The valid values are all integers from 0 to 63 for system with
a su…
symbolsUnsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.146
zhoneVdslLineConfUpGinpMin
ginpMin - The minimum upstream impulse noise protection (INP) against
single high impulse noise event (SHINE) in discrete multitone (DMT)
symbols. The valid values are all integers from 0 to 63 for system with
a sub-…
symbolsUnsigned32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.147
zhoneVdslLineConfDownGinpMinRSoverhead
gInpMinRSoverhead - This value specifies the downstream bandwidth
reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N
ratio. The unit is 1/256th and the range is 0..64 (0 to 25%).
ratioUnsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.148
zhoneVdslLineConfUpGinpMinRSoverhead
gInpMinRSoverhead - This value specifies the upstream bandwidth
reserved for RS (reed-solomon) codewords. The minimum guaranteed R/N
ratio. The unit is 1/256th and the range is 0..64 (0 to 25%).
ratioUnsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.149
zhoneVdslLineConfDownGinpReinCfg
gInpReinCfg - The minimum downstream impulse protection against
electrical repetitive impulse noise (REIN) in DMT symbols. The valid
values are all integers from 0 to 7 for system with a sub-carrier
spacing of 4.3125…
symbolsUnsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.150
zhoneVdslLineConfUpGinpReinCfg
gInpReinCfg - The minimum upstream impulse protection against
electrical repetitive impulse noise (REIN) in DMT symbols. The valid
values are all integers from 0 to 7 for system with a sub-carrier
spacing of 4.3125 k…
symbolsUnsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.151
zhoneVdslLineConfDownGinpReinFreq
ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used
in the Channel Initialization Policy and on-line reconfiguration procedures.
REIN is commonly coupled from electrical power cables appliances…
HzEnumerationr/w
Enumerated Values:
1freq100hz
2freq120hz
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.152
zhoneVdslLineConfUpGinpReinFreq
ginpReinFreq specifies the frequency of REIN inter-arrival time. It is used
in the Channel Initialization Policy and on-line reconfiguration procedures.
REIN is commonly coupled from electrical power cables appliances…
HzEnumerationr/w
Enumerated Values:
1freq100hz
2freq120hz
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.153
zhoneVdslLineConfDownGinpRtxMode
gInpRtxMode - Downstream retransmission Mode (RTX MODE). The RTX_MODE
is a configuration parameter used to control activation of retransmission
during initialization. This parameter has 4 valid values:
FORBIDDEN: ITU-…
Enumerationr/w
Enumerated Values:
1forbidden
2preferred
3forced
4testmode
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.154
zhoneVdslLineConfUpGinpRtxMode
gInpRtxMode - Upstream retransmission Mode (RTX MODE). The RTX_MODE
is a configuration parameter used to control activation of retransmission
during initialization. This parameter has 4 valid values:
FORBIDDEN: ITU-T …
Enumerationr/w
Enumerated Values:
1forbidden
2preferred
3forced
4testmode
 .1.3.6.1.4.1.5504.5.13.1.1.11.1.155

zhoneVdslLineAlarmConfProfileTable

table
.1.3.6.1.4.1.5504.5.13.1.1.20 · 1 row entry · 18 columns
Open in standard view 
This table contains information on the VDSL line alarm
configuration.  One entry in this table reflects a profile
defined by a manager which can be used to configure the
VDSL line alarm thresholds.
          
Entries in this table MUST be maintained in a
persistent manner.
zhoneVdslLineAlarmConfProfileEntry entry .1.3.6.1.4.1.5504.5.13.1.1.20.1
Each entry consists of a list of parameters that
represents the configuration of a VDSL line alarm
profile.

A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to v…
Indexes
IF-MIBifIndex
Column Syntax OID
zhoneVdslLineAlarmConfProfileName
The name for this profile as specified by an
administrator.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.1
zhoneVdslLineAlarmConfThresh15MinLofs
This object configures the threshold for the number of
loss of frame seconds (LOFs) within any given 15-minute
performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute colle…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.2
zhoneVdslLineAlarmConfThresh15MinLoss
This object configures the threshold for the number of
loss of signal seconds (LOSs) within any given 15-minute
performance data collection interval. If the value of
loss of signal seconds in a particular 15-minute
col…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.3
zhoneVdslLineAlarmConfThresh15MinLprs
This object configures the threshold for the number of
loss of power seconds (LPRs) within any given 15-minute
performance data collection interval. If the value of
loss of power seconds in a particular 15-minute colle…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.4
zhoneVdslLineAlarmConfThresh15MinLols
This object configures the threshold for the number of
loss of link seconds (LOLs) within any given 15-minute
performance data collection interval. If the value of
loss of link seconds in a particular 15-minute collect…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.5
zhoneVdslLineAlarmConfThresh15MinESs
This object configures the threshold for the number of
errored seconds (ESs) within any given 15-minute
performance data collection interval. If the value of
errored seconds in a particular 15-minute collection
interva…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.6
zhoneVdslLineAlarmConfThresh15MinSESs
This object configures the threshold for the number of
severely errored seconds (SESs) within any given 15-minute
performance data collection interval. If the value of
severely errored seconds in a particular 15-minute…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.7
zhoneVdslLineAlarmConfThresh15MinUASs
This object configures the threshold for the number of
unavailable seconds (UASs) within any given 15-minute
performance data collection interval. If the value of
unavailable seconds in a particular 15-minute collectio…
secondsInteger32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.8
zhoneVdslLineAlarmConfInitFailure
This object specifies if a vdslInitFailureNotification
notification will be generated if an initialization
failure occurs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.9
zhoneVdslLineAlarmConfProfRowStatus
This object is used to create a new row or modify or
delete an existing row in this table.

A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profil…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.10
zhoneVdslLineAlarmConfThresh1DayLofs
This object configures the threshold for the number of loss
of frame seconds (LOFs) within any given 1-day performance
data collection interval. If the value of loss of frame
seconds in a particular 1-day collection …
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.11
zhoneVdslLineAlarmConfThresh1DayLoss
This object configures the threshold for the number of loss
of signal seconds (LOSs) within any given 1-day performance
data collection interval. If the value of loss of signal
seconds in a particular 1-day collection…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.12
zhoneVdslLineAlarmConfThresh1DayLprs
This object configures the threshold for the number of loss
of power seconds (LPRs) within any given 1-day performance
data collection interval. If the value of loss of power
seconds in a particular 1-day collection i…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.13
zhoneVdslLineAlarmConfThresh1DayLols
This object configures the threshold for the number of loss
of link seconds (LOLs) within any given 1-day performance
data collection interval. If the value of loss of link
seconds in a particular 1-day collection int…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.14
zhoneVdslLineAlarmConfThresh1DayESs
This object configures the threshold for the number of errored
seconds (ESs) within any given 1-day performance
data collection interval. If the value of errored seconds in
a particular 1-day collection interval reac…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.15
zhoneVdslLineAlarmConfThresh1DaySESs
This object configures the threshold for the number of severely
errored seconds (SESs) within any given 1-day performance
data collection interval. If the value of severely errored
seconds in a particular 1-day colle…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.16
zhoneVdslLineAlarmConfThresh1DayUASs
This object configures the threshold for the number of
unavailable seconds (UASs) within any given 1-day performance
data collection interval. If the value of unavailable seconds
in a particular 1-day collection int…
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.17
zhoneVdslLineAlarmConfThresh1DayInitFailure
This object specifies if a vdslThresh1DayInitFailureNotification
notification will be generated if an initialization
failure occurs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.13.1.1.20.1.18

zhoneVdslCustomNotchConfProfileTable

table
.1.3.6.1.4.1.5504.5.13.1.1.21 · 1 row entry · 3 columns
Open in standard view 
This table contains HAM (Handheld Amateur
Radio) custom notch information.
zhoneVdslCustomNotchConfProfileEntry entry .1.3.6.1.4.1.5504.5.13.1.1.21.1
Each VDSL port can have custom notches.
Indexes
IF-MIBifIndex zhoneVdslCustomNotchConfId
Column Syntax OID
zhoneVdslCustomNotchConfId
Each VDSL2 port can have eight (8) custom
notch pairs.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.5504.5.13.1.1.21.1.1
zhoneVdslCustomNotchConfStart
Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch. zhoneVdslCustomNotchConfStart MUST
be less than or equal to zhoneVdslCustomNotchConfStop.
kHzUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.21.1.2
zhoneVdslCustomNotchConfStop
Specifies the end frequency of custom HAM (Handheld
Amateur Radio) notch. zhoneVdslCustomNotchConfStop MUST
be greater than or equal to zhoneVdslCustomNotchConfStart.
kHzUnsigned32r/w
Constraints:
range: 0-200000
 .1.3.6.1.4.1.5504.5.13.1.1.21.1.3

zhoneVdslVectDataTable

table
.1.3.6.1.4.1.5504.5.13.1.1.22 · 1 row entry · 4 columns
Open in standard view 
Used to retrieve the vectoring packet counts.
zhoneVdslVectDataEntry entry .1.3.6.1.4.1.5504.5.13.1.1.22.1
Vectoring Packet statistics data
Indexes
IF-MIBifIndex
Column Syntax OID
zhoneVdslVectDataEsDsCounter
Error Sample Downstream Packet Counter
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.22.1.1
zhoneVdslVectDataEsUsCounter
Error Sample Upstream Packet Counter
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.22.1.2
zhoneVdslVectDataIsDsFeValid
Is Downstream Fe Valid
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.22.1.3
zhoneVdslVectDataEsFeDsCounter
Error Sample Fe Downstream Counter
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.13.1.1.22.1.4