zhoneVdslPhysCurrAtn
ZhoneVdsl-MIB ·
.1.3.6.1.4.1.5504.5.13.1.1.2.1.6
Object
column
0.10dBm Unsigned32
Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu. The effective range is 0 to +63.75 dB.
Context
- MIB
- ZhoneVdsl-MIB
- OID
.1.3.6.1.4.1.5504.5.13.1.1.2.1.6- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.10dBm
- Parent
- zhoneVdslPhysEntry
- Table
- zhoneVdslPhysTable
- Siblings
- 14
Syntax
0.10dBm Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneVdslPhysSide Identifies whether the transceiver is the Vtuc or Vtur. | column | ZhoneVdslLineEntity | .1.3.6.1.4.1.5504.5.13.1.1.2.1.1 |
| zhoneVdslPhysCurrLineRate Indicates the current data rate in steps of 1000
bits/second by the Vtu. This value will be less than
or equal to vdslPhysCurrAttainableRate. Note: 1 kbps =
1000 bps. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.5.13.1.1.2.1.10 |
| zhoneVdslPhysCurrConnType Indicates current connection type.
unknown(1) - could not determine connection type
not-connected(2) - connection has not been established
invalid(3) … | column | Enumeration | .1.3.6.1.4.1.5504.5.13.1.1.2.1.12 |
| zhoneVdslPhysCurrProfile Indicates current VDSL profile being used in the
connection. This object is only valid for VDSL
connections. | column | Enumeration | .1.3.6.1.4.1.5504.5.13.1.1.2.1.13 |
| zhoneVdslPhysPhyRActive Phy Retransmit Rx Queue Active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.13.1.1.2.1.14 |
| zhoneVdslPhysGinpActive G.INP/ITU-G.998.4 feature active | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.13.1.1.2.1.15 |
| zhoneVdslPhysTransportMode Transport mode, either ATM or PTM | column | Enumeration | .1.3.6.1.4.1.5504.5.13.1.1.2.1.16 |
| zhoneVdslPhysInvSerialNumber The vendor specific string that identifies the
vendor equipment. | column | OctetString | .1.3.6.1.4.1.5504.5.13.1.1.2.1.2 |
| zhoneVdslPhysInvVendorID The vendor ID code is a copy of the binary vendor
identification field expressed as readable characters
in hexadecimal notation. | column | OctetString | .1.3.6.1.4.1.5504.5.13.1.1.2.1.3 |
| zhoneVdslPhysInvVersionNumber The vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field expressed as
readable characters in he… | column | OctetString | .1.3.6.1.4.1.5504.5.13.1.1.2.1.4 |
| zhoneVdslPhysCurrSnrMgn Noise Margin as seen by this Vtu with respect to its
received signal in 0.10dB. The effective range is
-31.75 to +31.75 dB. | column | 0.10dBm Integer32 | .1.3.6.1.4.1.5504.5.13.1.1.2.1.5 |
| zhoneVdslPhysCurrStatus Indicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There are no defects on… | column | Bits | .1.3.6.1.4.1.5504.5.13.1.1.2.1.7 |
| zhoneVdslPhysCurrOutputPwr Measured total output power transmitted by this VTU.
This is the measurement that was reported during
the last activation sequence. | column | 0.1dBm Integer32 | .1.3.6.1.4.1.5504.5.13.1.1.2.1.8 |
| zhoneVdslPhysCurrAttainableRate Indicates the maximum currently attainable data rate
in steps of 1000 bits/second by the Vtu. This value
will be equal to or greater than vdslPhysCurrLineRate.
Note that for SCM,… | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.5.13.1.1.2.1.9 |