ZYXEL-ES3124-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
33
Rows
33
Columns
203

rateLimitPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.2.2 · 1 row entry · 3 columns
Open in standard view
rateLimitPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.2.2.1
An entry in rateLimitPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
rateLimitPortState
Ingress/egress rate limiting enabled/disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.2.2.1.1
rateLimitPortIngRate
Ingress rate in Kbit/s. The granularity of FE port is between 1 and 100000. For GE port, the granularity is between 1 and 1000000.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.2.2.1.2
rateLimitPortEgrRate
Egress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.2.2.1.3

brLimitPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.3.2 · 1 row entry · 6 columns
Open in standard view
brLimitPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.3.2.1
An entry in brLimitPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
brLimitPortBrState
Broadcast rate limiting enabled/disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.1
brLimitPortBrRate
Allowed broadcast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.2
brLimitPortMcState
Multicast rate limiting enabled/disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.3
brLimitPortMcRate
AAllowed mullticast rate in pkts/s. For FE port,
the maximum value is 148800. For GE port, the maximum value is 262143.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.4
brLimitPortDlfState
Destination lookup failure frames rate limiting enabled/disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.5
brLimitPortDlfRate
Allowed destination lookup failure frames rate in pkts/s.
For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.3.2.1.6

portSecurityPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.4.2 · 1 row entry · 3 columns
Open in standard view
portSecurityPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.4.2.1
An entry in portSecurityPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
portSecurityPortState
Port Security enabled/disabled on the port.
Active(1) means this port only accept frames from static MAC addresses that are configured for the port,
and dynamic MAC address frames up to the number specified by portSec…
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.4.2.1.1
portSecurityPortLearnState
MAC address learning enabled/disable on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.4.2.1.2
portSecurityPortCount
Number of (dynamic) MAC addresses that may be learned on the port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.4.2.1.3

vlanTrunkPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.5.1 · 1 row entry · 1 columns
Open in standard view
vlanTrunkPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.5.1.1
An entry in vlanTrunkPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
vlanTrunkPortState
VlanTrunking enabled/disabled on the port.
Active(1) to allow frames belonging to unknown
VLAN groups to pass through the switch.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.5.1.1.1

ctlProtTransTunnelPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.6.2 · 1 row entry · 1 columns
Open in standard view
ctlProtTransTunnelPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.6.2.1
An entry in ctlProtTransTunnelPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
ctlProtTransTunnelMode
Bridge control protocol transparency mode for the port.
Modes: Peer(0), Tunnel(1), Discard(2), Network(3)
Enumerationr/w
Enumerated Values:
0peer
1tunnel
2discard
3network
 .1.3.6.1.4.1.890.1.5.8.12.6.2.1.1

vlanStackPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.7.3 · 1 row entry · 3 columns
Open in standard view
vlanStackPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.7.3.1
An entry in vlanStackPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
vlanStackPortMode
Mode of the port. Set Normal to have the switch ignore frames received
(or transmitted) on this port with VLAN stacking tags.
Anything you configure in SPVID and Priority are ignored.
Set Access mode to have the swit…
Enumerationr/w
Enumerated Values:
1normal
2access
3tunnel
 .1.3.6.1.4.1.890.1.5.8.12.7.3.1.1
vlanStackPortVid
VLAN ID used in service provider tag.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.7.3.1.2
vlanStackPortPrio
Priority value for service provider tag.
0 is the lowest priority level and 7 is the highest.
Enumerationr/w
Enumerated Values:
0prioriry-0
1prioriry-1
2prioriry-2
3prioriry-3
4prioriry-4
5prioriry-5
6prioriry-6
7prioriry-7
 .1.3.6.1.4.1.890.1.5.8.12.7.3.1.3

portAuthTable

table
.1.3.6.1.4.1.890.1.5.8.12.8.4 · 1 row entry · 3 columns
Open in standard view
portAuthEntry entry .1.3.6.1.4.1.890.1.5.8.12.8.4.1
An entry in portAuthTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
portAuthEntryState
802.1x port authentication enabled or disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.8.4.1.1
portReAuthEntryState
802.1x port re-authentication enabled or disabled on the port.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.8.4.1.2
portReAuthEntryTimer
Re-authentication timer in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.8.4.1.3

fanRpmTable

table
.1.3.6.1.4.1.890.1.5.8.12.9.1 · 1 row entry · 6 columns
Open in standard view
fanRpmEntry entry .1.3.6.1.4.1.890.1.5.8.12.9.1.1
An entry in fanRpmTable.
Indexes
fanRpmIndex
Column Syntax OID
fanRpmIndex
Index of FAN.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.1
fanRpmCurValue
Current speed in Revolutions Per Minute (RPM) on the fan.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.2
fanRpmMaxValue
Maximum speed measured in Revolutions Per Minute (RPM) on the fan.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.3
fanRpmMinValue
Minimum speed measured in Revolutions Per Minute (RPM) on the fan.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.4
fanRpmLowThresh
The minimum speed at which a normal fan should work.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.5
fanRpmDescr
'Normal' indicates that this fan is functioning above the minimum speed.
'Error' indicates that this fan is functioning below the minimum speed.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.9.1.1.6

tempTable

table
.1.3.6.1.4.1.890.1.5.8.12.9.2 · 1 row entry · 6 columns
Open in standard view
tempEntry entry .1.3.6.1.4.1.890.1.5.8.12.9.2.1
An entry in tempTable.
Indexes
tempIndex
Column Syntax OID
tempIndex
Index of temperature unit. 1:MAC, 2:CPU, 3:PHY
Enumeration
Enumerated Values:
1mac
2cpu
3phy
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.1
tempCurValue
The current temperature measured at this sensor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.2
tempMaxValue
The maximum temperature measured at this sensor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.3
tempMinValue
The minimum temperature measured at this sensor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.4
tempHighThresh
The upper temperature limit at this sensor.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.5
tempDescr
'Normal' indicates temperatures below the threshold and 'Error' for those above.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.9.2.1.6

voltageTable

table
.1.3.6.1.4.1.890.1.5.8.12.9.3 · 1 row entry · 7 columns
Open in standard view
voltageEntry entry .1.3.6.1.4.1.890.1.5.8.12.9.3.1
An entry in voltageTable.
Indexes
voltageIndex
Column Syntax OID
voltageIndex
Index of voltage.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.1
voltageCurValue
The current voltage reading.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.2
voltageMaxValue
The maximum voltage measured at this point.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.3
voltageMinValue
The minimum voltage measured at this point.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.4
voltageNominalValue
The normal voltage at wchich the switch work.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.5
voltageLowThresh
The minimum voltage at which the switch should work.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.6
voltageDescr
'Normal' indicates that the voltage is within an acceptable operating range
at this point; otherwise 'Error' is displayed.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.9.3.1.7

snmpTrapDestTable

table
.1.3.6.1.4.1.890.1.5.8.12.10.4 · 1 row entry · 2 columns
Open in standard view
snmpTrapDestEntry entry .1.3.6.1.4.1.890.1.5.8.12.10.4.1
An entry in snmpTrapDestTable.
Indexes
snmpTrapDestIP
Column Syntax OID
snmpTrapDestIP
IP address of trap destination.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.10.4.1.1
snmpTrapDestRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.10.4.1.2

inbandIpTable

table
.1.3.6.1.4.1.890.1.5.8.12.14.6 · 1 row entry · 6 columns
Open in standard view
inbandIpEntry entry .1.3.6.1.4.1.890.1.5.8.12.14.6.1
An entry in inbandIpTable.
Indexes
inbandEntryIp inbandEntryVid
Column Syntax OID
inbandEntryIp SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.1
inbandEntrySubnetMask SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.2
inbandEntryGateway SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.3
inbandEntryVid SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.4
inbandEntryManageable P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.5
inbandEntryRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.14.6.1.6

filterTable

table
.1.3.6.1.4.1.890.1.5.8.12.15.1 · 1 row entry · 5 columns
Open in standard view
filterEntry entry .1.3.6.1.4.1.890.1.5.8.12.15.1.1
An entry in filterTable.
Indexes
filterMacAddr filterVid
Column Syntax OID
filterName RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.15.1.1.1
filterActionState Enumerationr/w
Enumerated Values:
0none
1discard-source
2discard-destination
3both
 .1.3.6.1.4.1.890.1.5.8.12.15.1.1.2
filterMacAddr SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.890.1.5.8.12.15.1.1.3
filterVid SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.15.1.1.4
filterRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.15.1.1.5

mirrorTable

table
.1.3.6.1.4.1.890.1.5.8.12.16.3 · 1 row entry · 2 columns
Open in standard view
mirrorEntry entry .1.3.6.1.4.1.890.1.5.8.12.16.3.1
An entry in mirrorTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
mirrorMirroredState P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.16.3.1.1
mirrorDirection Enumerationr/w
Enumerated Values:
0ingress
1egress
2both
 .1.3.6.1.4.1.890.1.5.8.12.16.3.1.2

aggrGroupTable

table
.1.3.6.1.4.1.890.1.5.8.12.17.3 · 1 row entry · 3 columns
Open in standard view
aggrGroupEntry entry .1.3.6.1.4.1.890.1.5.8.12.17.3.1
An entry in aggrGroupTable.
Indexes
aggrGroupIndex
Column Syntax OID
aggrGroupIndex SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.17.3.1.1
aggrGroupState P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.17.3.1.2
aggrGroupDynamicState P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.17.3.1.3

aggrPortTable

table
.1.3.6.1.4.1.890.1.5.8.12.17.4 · 1 row entry · 2 columns
Open in standard view
aggrPortEntry entry .1.3.6.1.4.1.890.1.5.8.12.17.4.1
An entry in aggrPortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
aggrPortGroup Enumerationr/w
Enumerated Values:
0none
1t1
2t2
3t3
4t4
5t5
6t6
 .1.3.6.1.4.1.890.1.5.8.12.17.4.1.1
aggrPortDynamicStateTimeout SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.17.4.1.2

accessCtlTable

table
.1.3.6.1.4.1.890.1.5.8.12.18.1 · 1 row entry · 4 columns
Open in standard view
accessCtlEntry entry .1.3.6.1.4.1.890.1.5.8.12.18.1.1
An entry in accessCtlTable.
Indexes
accessCtlService
Column Syntax OID
accessCtlService Enumeration
Enumerated Values:
1telnet
2ssh
3ftp
4http
5https
6icmp
7snmp
 .1.3.6.1.4.1.890.1.5.8.12.18.1.1.1
accessCtlEnable P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.18.1.1.2
accessCtlServicePort SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.18.1.1.3
accessCtlTimeout SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.18.1.1.4

securedClientTable

table
.1.3.6.1.4.1.890.1.5.8.12.18.2 · 1 row entry · 5 columns
Open in standard view
securedClientEntry entry .1.3.6.1.4.1.890.1.5.8.12.18.2.1
An entry in securedClientTable.
Indexes
securedClientIndex
Column Syntax OID
securedClientIndex SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.18.2.1.1
securedClientEnable P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.18.2.1.2
securedClientStartIp SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.18.2.1.3
securedClientEndIp SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.18.2.1.4
securedClientService Bitsr/w
Enumerated Values:
0telnet
1ftp
2http
3icmp
4snmp
5ssh
6https
 .1.3.6.1.4.1.890.1.5.8.12.18.2.1.5

portQueuingMethodTable

table
.1.3.6.1.4.1.890.1.5.8.12.19.2 · 1 row entry · 2 columns
Open in standard view
portQueuingMethodEntry entry .1.3.6.1.4.1.890.1.5.8.12.19.2.1
An entry in portQueuingMethodTable.
Indexes
BRIDGE-MIBdot1dBasePort portQueuingMethodQueue
Column Syntax OID
portQueuingMethodQueue
0...7
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.19.2.1.1
portQueuingMethodWeight
0...100
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.19.2.1.2

dhcpRemoteServerTable

table
.1.3.6.1.4.1.890.1.5.8.12.20.1.6 · 1 row entry · 2 columns
Open in standard view
dhcpRemoteServerEntry entry .1.3.6.1.4.1.890.1.5.8.12.20.1.6.1
An entry in dhcpRemoteServerTable.
Indexes
dhcpRemoteServerIp
Column Syntax OID
dhcpRemoteServerIp SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.20.1.6.1.1
dhcpRemoteServerRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.20.1.6.1.2

staticRouteTable

table
.1.3.6.1.4.1.890.1.5.8.12.21.2 · 1 row entry · 6 columns
Open in standard view
staticRouteEntry entry .1.3.6.1.4.1.890.1.5.8.12.21.2.1
An entry in staticRouteTable.
Indexes
staticRouteIp staticRouteMask
Column Syntax OID
staticRouteName RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.1
staticRouteIp SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.2
staticRouteMask SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.3
staticRouteGateway SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.4
staticRouteMetric SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.5
staticRouteRowStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.21.2.1.6

arpTable

table
.1.3.6.1.4.1.890.1.5.8.12.22.1 · 1 row entry · 5 columns
Open in standard view
arpEntry entry .1.3.6.1.4.1.890.1.5.8.12.22.1.1
An entry in arpTable.
Indexes
arpIndex
Column Syntax OID
arpIndex SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.22.1.1.1
arpIpAddr SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.22.1.1.2
arpMacAddr SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.890.1.5.8.12.22.1.1.3
arpMacVid SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.22.1.1.4
arpType SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.22.1.1.5

pltCtlTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.1 · 1 row entry · 6 columns
Open in standard view
pltCtlEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.1.1
An entry in pltCtlTable.
Indexes
pltCtlInstType pltCtlInstId
Column Syntax OID
pltCtlInstType
The type of the service instance that is tested.
1: VLAN
Enumeration
Enumerated Values:
1vlan
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.1
pltCtlInstId
The ID of the service instance that is tested.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.2
pltCtlIpAddr
IP address of this PLT stack instance.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.3
pltCtlMask
IP subnet mask of this PLT stack instance.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.4
pltCtlGw
Default gateway IP address of this PLT stack instance.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.5
pltCtlRowStatus
This object allows entries to be created and deleted in the pltCtlTable.
All value MUST be specified prior to a transition to active(1) state being accepted.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.23.1.1.6

pingCtlTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.2 · 1 row entry · 25 columns
Open in standard view 
Defines the ping Control Table for providing, via SNMP,
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the
pingProbeHistoryTable.
pingCtlEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.2.1
Defines an entry in the pingCtlTable. The first index
element, pingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)…
Indexes
pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName
Column Syntax OID
pingCtlServInstType
The type of the service instance that this ping entry belong to.
1: VLAN.
This item would be used as an index
Enumeration
Enumerated Values:
1vlan
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.1
pingCtlServInstId
The ID of the service instance that this ping entry belong to.
This item would be used as an index
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.2
pingCtlOwnerIndex
To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entri…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.3
pingCtlTestName
The name of the ping test. This is locally unique, within
the scope of an pingCtlOwnerIndex.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.4
pingCtlTargetAddressType
Specifies the type of host address to be used at a remote
host for performing a ping operation.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.5
pingCtlTargetAddress
Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the object value of corresponding
pingCtlTargetAddressType.
A value for this object MUST be…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.6
pingCtlDataSize
Specifies the size of the data portion to be
transmitted in a ping operation in octets. A ping
request is usually an ICMP message encoded
into an IP packet. An IP packet has a maximum size
of 65535 octets. Subtractin…
octetsUnsigned32r/w
Constraints:
range: 0-65507
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.7
pingCtlTimeOut
Specifies the time-out value, in seconds, for a
remote ping operation.
secondsUnsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.8
pingCtlProbeCount
Specifies the number of times to perform a ping
operation at a remote host.
probesUnsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.9
pingCtlAdminStatus
Reflects the desired state that a pingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this pingCtlEntry.
disabled(2) - Deactivate the test as defined by this
pin…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.10
pingCtlDataFill
The content of this object is used together with the
corresponding pingCtlDataSize value to determine how to
fill the data portion of a probe packet. The option of
selecting a data fill pattern can be useful when links…
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.11
pingCtlFrequency
The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding row.
A single ping test consists of a series of ping probes.
The number of probes is determi…
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.12
pingCtlMaxRows
The maximum number of entries allowed in the
pingProbeHistoryTable. An implementation of this
MIB will remove the oldest entry in the
pingProbeHistoryTable to allow the addition of an
new entry once the number of rows …
rowsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.13
pingCtlStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.14
pingCtlTrapGeneration
The value of this object determines when and if
to generate a notification for this entry:
probeFailure(0) - Generate a pingProbeFailed
notification subject to the value of
pingCtlTrapProbeFailureFilter. The …
Bitsr/w
Enumerated Values:
0probeFailure
1testFailure
2testCompletion
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.15
pingCtlTrapProbeFailureFilter
The value of this object is used to determine when
to generate a pingProbeFailed NOTIFICATION.

Setting pingCtlTrapGeneration
to probeFailure(0) implies that a pingProbeFailed
NOTIFICATION is generated onl…
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.16
pingCtlTrapTestFailureFilter
The value of this object is used to determine when
to generate a pingTestFailed NOTIFICATION.
Setting pingCtlTrapGeneration to testFailure(1)
implies that a pingTestFailed NOTIFICATION is
generated only when the number …
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.17
pingCtlType
The value of this object is used to either report or
select the implementation method to be used for
calculating a ping response time. The value of this
object MAY be selected from pingImplementationTypeDomains.
Additi…
ObjectIdentifierr/w .1.3.6.1.4.1.890.1.5.8.12.23.2.1.18
pingCtlDescr
The purpose of this object is to provide a
descriptive name of the remote ping test.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.19
pingCtlSourceAddressType
Specifies the type of the source address,
pingCtlSourceAddress, to be used at a remote host
when performing a ping operation.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.20
pingCtlSourceAddress
Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.21
pingCtlIfIndex
Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted over the
specified interface. A value of zero for this object
means that this option is …
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.22
pingCtlByPassRouteTable
The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.23
pingCtlDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.24
pingCtlRowStatus
This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in all corresponding (same
pingCtlOwnerIndex and pingCtlTestName index values)
pingResultsTable and p…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.23.2.1.25

pingResultsTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.3 · 1 row entry · 10 columns
Open in standard view 
Defines the Ping Results Table for providing
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the pingPastProbeTable.
An entry is added to the pingResultsTable when an
pingCtlEntry is started by successful transition
of its pingCtlAdminStatus object to enabled(1).
An entry is removed from the pingResultsTable when
its corresponding pingCtlEntry is deleted.
pingResultsEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.3.1
Defines an entry in the pingResultsTable. The
pingResultsTable has the same indexing as the
pingCtlTable in order for a pingResultsEntry to
correspond to the pingCtlEntry that caused it to
be created.
Indexes
pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName
Column Syntax OID
pingResultsOperStatus
Reflects the operational state of a pingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.1
pingResultsIpTargetAddressType
This objects indicates the type of address stored
in the corresponding pingResultsIpTargetAddress
object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.2
pingResultsIpTargetAddress
This objects reports the IP address associated
with a pingCtlTargetAddress value when the destination
address is specified as a DNS name. The value of
this object should be a zero length octet string
when a DNS name is…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.3
pingResultsMinRtt
The minimum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.4
pingResultsMaxRtt
The maximum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.5
pingResultsAverageRtt
The current average ping round-trip-time (RTT).
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.6
pingResultsProbeResponses
Number of responses received for the corresponding
pingCtlEntry and pingResultsEntry. The value of this object
MUST be reported as 0 when no probe responses have been
received.
responsesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.7
pingResultsSentProbes
The value of this object reflects the number of probes sent
for the corresponding pingCtlEntry and pingResultsEntry.
The value of this object MUST be reported as 0 when no probes
have been sent.
probesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.8
pingResultsRttSumOfSquares
This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation. The value of this object MUST
be reported as 0 when no ping responses have been
rec…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.9
pingResultsLastGoodProbe
Date and time when the last response was received for
a probe.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.890.1.5.8.12.23.3.1.10

pingProbeHistoryTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.4 · 1 row entry · 5 columns
Open in standard view 
Defines a table for storing the results of a ping
operation.  Entries in this table are limited by
the value of the corresponding pingCtlMaxRows
object.
An entry in this table is created when the result of
a ping probe is determined.  The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to.  An entry is removed from this table when
its corresponding pingCtlEntry is deleted.
An implementation of this MIB will remove the oldest
entry in the pingProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the pingProbeHistoryTable reaches the value specified
by pingCtlMaxRows.
pingProbeHistoryEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.4.1
Defines an entry in the pingProbeHistoryTable.
The first two index elements identify the
pingCtlEntry that a pingProbeHistoryEntry belongs
to. The third index element selects a single
probe result.
Indexes
pingCtlServInstType pingCtlServInstId pingCtlOwnerIndex pingCtlTestName pingProbeHistoryIndex
Column Syntax OID
pingProbeHistoryIndex
An entry in this table is created when the result of
a ping probe is determined. The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to.
An imple…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.4.1.1
pingProbeHistoryResponse
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.4.1.2
pingProbeHistoryStatus
The result of a particular probe done by a remote host.
DISMAN-PING-MIBOperationResponseStatus
Textual Convention: DISMAN-PING-MIBOperationResponseStatus Enumeration
Type Values:
1responseReceived
2unknown
3internalError
4requestTimedOut
5unknownDestinationAddress
6noRouteToTarget
7interfaceInactiveToTarget
8arpFailure
9maxConcurrentLimitReached
10unableToResolveDnsName
11invalidHostAddress
 .1.3.6.1.4.1.890.1.5.8.12.23.4.1.3
pingProbeHistoryLastRC
The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains
the code ICMP-ECHOREPLY(0). The ICMP r…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.4.1.4
pingProbeHistoryTime
Timestamp for when this probe result was determined.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.890.1.5.8.12.23.4.1.5

traceRouteCtlTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.5 · 1 row entry · 29 columns
Open in standard view 
Defines the Remote Operations Traceroute Control Table for
providing the capability of invoking traceroute from a remote
host.  The results of traceroute operations can be stored in
the traceRouteResultsTable, traceRouteProbeHistoryTable, and
the traceRouteHopsTable.
traceRouteCtlEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.5.1
Defines an entry in the traceRouteCtlTable. The first
index element, traceRouteCtlOwnerIndex, is of type
SnmpAdminString, a textual convention that allows for
use of the SNMPv3 View-Based Access Control Model
(RFC 2575…
Indexes
traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName
Column Syntax OID
traceRouteCtlServInstType
The type of the service instance that this traceRoute entry belong to.
1: VLAN.
This item would be used as an index
Enumeration
Enumerated Values:
1vlan
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.1
traceRouteCtlServInstId
The ID of the service instance that this traceRoute entry belong to.
This item would be used as an index
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.2
traceRouteCtlOwnerIndex
To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entri…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.3
traceRouteCtlTestName
The name of a traceroute test. This is locally unique,
within the scope of an traceRouteCtlOwnerIndex.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.4
traceRouteCtlTargetAddressType
Specifies the type of host address to be used on the
traceroute request at the remote host.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.5
traceRouteCtlTargetAddress
Specifies the host address used on the
traceroute request at the remote host. The
host address type can be determined by the
examining the value of the corresponding
traceRouteCtlTargetAddressType index element.
A valu…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.6
traceRouteCtlByPassRouteTable
The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.7
traceRouteCtlDataSize
Specifies the size of the data portion of a traceroute
request in octets. A traceroute request is essentially
transmitted by encoding a UDP datagram into a
IP packet. So subtracting the size of a UDP header
(8 octets) …
octetsUnsigned32r/w
Constraints:
range: 0-65507
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.8
traceRouteCtlTimeOut
Specifies the time-out value, in seconds, for
a traceroute request.
secondsUnsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.9
traceRouteCtlProbesPerHop
Specifies the number of times to reissue a traceroute
request with the same time-to-live (TTL) value.
probesUnsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.10
traceRouteCtlPort
Specifies the UDP port to send the traceroute
request to. Need to specify a port that is not in
use at the destination (target) host. The default
value for this object is the IANA assigned port,
33434, for the tracero…
UDP PortUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.11
traceRouteCtlMaxTtl
Specifies the maximum time-to-live value.
time-to-live valueUnsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.12
traceRouteCtlDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the traceroute probe. The DS Field is
defined as the Type of Service (TOS) octet in a IPv4
header or as the Tr…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.13
traceRouteCtlSourceAddressType
Specifies the type of the source address,
traceRouteCtlSourceAddress, to be used at a remote host
when performing a traceroute operation.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.14
traceRouteCtlSourceAddress
Use the specified IP address (which must be given
as an IP number, not a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source add…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.15
traceRouteCtlIfIndex
Setting this object to an interface's ifIndex prior
to starting a remote traceroute operation directs
the traceroute probes to be transmitted over the
specified interface. A value of zero for this object
implies that t…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.16
traceRouteCtlMiscOptions
Enables an application to specify implementation
dependent options.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.17
traceRouteCtlMaxFailures
The value of this object indicates the maximum number
of consecutive timeouts allowed before terminating
a remote traceroute request. A value of either 255 (maximum
hop count/possible TTL value) or a 0 indicates that t…
timeoutsUnsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.18
traceRouteCtlDontFragment
This object enables setting of the don't fragment flag (DF)
in the IP header for a probe. Use of this object enables
performing a manual PATH MTU test.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.19
traceRouteCtlInitialTtl
The value of this object specifies the initial TTL value to
use. This enables bypassing the initial (often well known)
portion of a path.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.20
traceRouteCtlFrequency
The number of seconds to wait before repeating a
traceroute test as defined by the value of the
various objects in the corresponding row.
The number of hops in a single traceroute test
is determined by the value of the …
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.21
traceRouteCtlStorageType
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.22
traceRouteCtlAdminStatus
Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabled(2) - Deactivate the test as defined b…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.23
traceRouteCtlDescr
The purpose of this object is to provide a
descriptive name of the remote traceroute
test.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.24
traceRouteCtlMaxRows
The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow the addition
of an new entry once the num…
rowsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.25
traceRouteCtlTrapGeneration
The value of this object determines when and if to
to generate a notification for this entry:
pathChange(0) - Generate a traceRoutePathChange
notification when the current path varies from a
previously deter…
Bitsr/w
Enumerated Values:
0pathChange
1testFailure
2testCompletion
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.26
traceRouteCtlCreateHopsEntries
The current path for a traceroute test is kept in the
traceRouteHopsTable on a per hop basis when the value of
this object is true(1).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.27
traceRouteCtlType
The value of this object is used either to report or
select the implementation method to be used for
performing a traceroute operation. The value of this
object may be selected from
traceRouteImplementationTypeDomains.
…
ObjectIdentifierr/w .1.3.6.1.4.1.890.1.5.8.12.23.5.1.28
traceRouteCtlRowStatus
This object allows entries to be created and deleted
in the traceRouteCtlTable. Deletion of an entry in
this table results in all corresponding (same
traceRouteCtlOwnerIndex and traceRouteCtlTestName
index values) trac…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.5.8.12.23.5.1.29

traceRouteResultsTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.6 · 1 row entry · 8 columns
Open in standard view 
Defines the Remote Operations Traceroute Results Table for
keeping track of the status of a traceRouteCtlEntry.
          
An entry is added to the traceRouteResultsTable when an
traceRouteCtlEntry is started by successful transition
of its traceRouteCtlAdminStatus object to enabled(1).
An entry is removed from the traceRouteResultsTable when
its corresponding traceRouteCtlEntry is deleted.
traceRouteResultsEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.6.1
Defines an entry in the traceRouteResultsTable. The
traceRouteResultsTable has the same indexing as the
traceRouteCtlTable in order for a traceRouteResultsEntry
to correspond to the traceRouteCtlEntry that caused it to…
Indexes
traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName
Column Syntax OID
traceRouteResultsOperStatus
Reflects the operational state of an traceRouteCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.1
traceRouteResultsCurHopCount
Reflects the current TTL value (range from 1 to
255) for a remote traceroute operation.
Maximum TTL value is determined by
traceRouteCtlMaxTtl.
hopsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.2
traceRouteResultsCurProbeCount
Reflects the current probe count (1..10) for
a remote traceroute operation. The maximum
probe count is determined by
traceRouteCtlProbesPerHop.
probesSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.3
traceRouteResultsIpTgtAddrType
This objects indicates the type of address stored
in the corresponding traceRouteResultsIpTgtAddr
object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.4
traceRouteResultsIpTgtAddr
This objects reports the IP address associated
with a traceRouteCtlTargetAddress value when the
destination address is specified as a DNS name.
The value of this object should be a zero length
octet string when a DNS na…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.5
traceRouteResultsTestAttempts
The current number of attempts to determine a path
to a target. The value of this object MUST be started
at 0.
testsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.6
traceRouteResultsTestSuccesses
The current number of attempts to determine a path
to a target that have succeeded. The value of this
object MUST be reported as 0 when no attempts have
succeeded.
testsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.7
traceRouteResultsLastGoodPath
The date and time when the last complete path
was determined.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.890.1.5.8.12.23.6.1.8

traceRouteProbeHistoryTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.7 · 1 row entry · 9 columns
Open in standard view 
Defines the Remote Operations Traceroute Results Table for
storing the results of a traceroute operation.
An implementation of this MIB will remove the oldest
entry in the traceRouteProbeHistoryTable to allow the
addition of an new entry once the number of rows in
the traceRouteProbeHistoryTable reaches the value specified
by traceRouteCtlMaxRows.
traceRouteProbeHistoryEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.7.1
Defines a table for storing the results of a traceroute
operation. Entries in this table are limited by
the value of the corresponding traceRouteCtlMaxRows
object.
The first two index elements identify the
traceRouteCt…
Indexes
traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName traceRouteProbeHistoryIndex traceRouteProbeHistoryHopIndex traceRouteProbeHistoryProbeIndex
Column Syntax OID
traceRouteProbeHistoryIndex
An entry in this table is created when the result of
a traceroute probe is determined. The initial 2 instance
identifier index values identify the traceRouteCtlEntry
that a probe result (traceRouteProbeHistoryEntry) be…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.1
traceRouteProbeHistoryHopIndex
Indicates which hop in a traceroute path that the probe's
results are for. The value of this object is initially
determined by the value of traceRouteCtlInitialTtl.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.2
traceRouteProbeHistoryProbeIndex
Indicates the index of a probe for a particular
hop in a traceroute path. The number of probes per
hop is determined by the value of the corresponding
traceRouteCtlProbesPerHop object.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.3
traceRouteProbeHistoryHAddrType
This objects indicates the type of address stored
in the corresponding traceRouteProbeHistoryHAddr
object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.4
traceRouteProbeHistoryHAddr
The address of a hop in a traceroute path. This object
is not allowed to be a DNS name. The value of the
corresponding object, traceRouteProbeHistoryHAddrType,
indicates this object's IP address type.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.5
traceRouteProbeHistoryResponse
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.6
traceRouteProbeHistoryStatus
The result of a traceroute operation made by a remote
host for a particular probe.
DISMAN-PING-MIBOperationResponseStatus
Textual Convention: DISMAN-PING-MIBOperationResponseStatus Enumeration
Type Values:
1responseReceived
2unknown
3internalError
4requestTimedOut
5unknownDestinationAddress
6noRouteToTarget
7interfaceInactiveToTarget
8arpFailure
9maxConcurrentLimitReached
10unableToResolveDnsName
11invalidHostAddress
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.7
traceRouteProbeHistoryLastRC
The last implementation method specific reply code received.
Traceroute is usually implemented by transmitting a series of
probe packets with increasing time-to-live values. A probe
packet is a UDP datagram encapsulate…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.8
traceRouteProbeHistoryTime
Timestamp for when this probe results were determined.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.890.1.5.8.12.23.7.1.9

traceRouteHopsTable

table
.1.3.6.1.4.1.890.1.5.8.12.23.8 · 1 row entry · 10 columns
Open in standard view 
Defines the Remote Operations Traceroute Hop Table for
keeping track of the results of traceroute tests on a
per hop basis.
traceRouteHopsEntry entry .1.3.6.1.4.1.890.1.5.8.12.23.8.1
Defines an entry in the traceRouteHopsTable.
The first two index elements identify the
traceRouteCtlEntry that a traceRouteHopsEntry
belongs to. The third index element,
traceRouteHopsHopIndex, selects a
hop in a trace…
Indexes
traceRouteCtlServInstType traceRouteCtlServInstId traceRouteCtlOwnerIndex traceRouteCtlTestName traceRouteHopsHopIndex
Column Syntax OID
traceRouteHopsHopIndex
Specifies the hop index for a traceroute hop. Values
for this object with respect to the same
traceRouteCtlOwnerIndex and traceRouteCtlTestName
MUST start at 1 and increase monotonically.
The traceRouteHopsTable keeps …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.1
traceRouteHopsIpTgtAddressType
This objects indicates the type of address stored
in the corresponding traceRouteHopsIpTargetAddress
object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.2
traceRouteHopsIpTgtAddress
This object reports the IP address associated with
the hop. A value for this object should be reported
as a numeric IP address and not as a DNS name.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.3
traceRouteHopsMinRtt
The minimum traceroute round-trip-time (RTT) received for
this hop. A value of 0 for this object implies that no
RTT has been received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.4
traceRouteHopsMaxRtt
The maximum traceroute round-trip-time (RTT) received for
this hop. A value of 0 for this object implies that no
RTT has been received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.5
traceRouteHopsAverageRtt
The current average traceroute round-trip-time (RTT) for
this hop.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.6
traceRouteHopsRttSumOfSquares
This object contains the sum of all traceroute responses
received for this hop. Its purpose is to enable standard
deviation calculation.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.7
traceRouteHopsSentProbes
The value of this object reflects the number of probes sent
for this hop during this traceroute test. The value of this
object should start at 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.8
traceRouteHopsProbeResponses
Number of responses received for this hop during this
traceroute test. This value of this object should start
at 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.9
traceRouteHopsLastGoodProbe
Date and time was the last response was received for a probe
for this hop during this traceroute test.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.890.1.5.8.12.23.8.1.10

portOpModePortTable

table
.1.3.6.1.4.1.890.1.5.8.12.24.1 · 1 row entry · 7 columns
Open in standard view
portOpModePortEntry entry .1.3.6.1.4.1.890.1.5.8.12.24.1.1
An entry in portOpModePortTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
portOpModePortSpeedDuplex Enumerationr/w
Enumerated Values:
0auto
1speed-10-half
2speed-10-full
3speed-100-half
4speed-100-full
5speed-1000-full
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.1
portOpModePortFlowCntl Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.2
portOpModePortName OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.3
portOpModePortModuleType Enumeration
Enumerated Values:
0fast-ethernet-10-100
1gigabit-ethernet-100-1000
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.4
portOpModePortLinkUpType Enumeration
Enumerated Values:
0down
1copper
2fiber
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.5
portOpModePortIntrusionLock P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.6
portOpModePortLBTestStatus
This entry display latest loopback test status of port while performing loopback test.
Enumeration
Enumerated Values:
0none
1underTesting
2success
3fail
 .1.3.6.1.4.1.890.1.5.8.12.24.1.1.7

portBasedVlanPortListTable

table
.1.3.6.1.4.1.890.1.5.8.12.25.1 · 1 row entry · 1 columns
Open in standard view
portBasedVlanPortListEntry entry .1.3.6.1.4.1.890.1.5.8.12.25.1.1
An entry in portBasedVlanPortListTable.
Indexes
BRIDGE-MIBdot1dBasePort
Column Syntax OID
portBasedVlanPortListMembers Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.890.1.5.8.12.25.1.1.1

eventTable

table
.1.3.6.1.4.1.890.1.5.8.12.26.1.1 · 1 row entry · 10 columns
Open in standard view 
A list of currently active fault events. All faults 
of normal type regardless of their severity level 
are recorded in the event table. When a normal 
type fault is cleared it is deleted from the event 
table.
eventEntry entry .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1
An entry containing information about an
event in the event table.
Indexes
eventSeqNum
Column Syntax OID
eventSeqNum
This variable represents the sequence number of an event.
Sequence number is incremented monotonically starting
from 0 until it reaches its maximum and wraps around back
to 0.

Sequence number is increm…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.1
eventEventId
This variable represents the event ID which uniquely
identifies the event in the entire system.
EventIdNumber
Textual Convention: EventIdNumber Integer32
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.2
eventName
This variable represents the name of the event, for
example 'Ethernet Link Down'
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.3
eventInstanceType
This variable represents the type of InstanceId of a
particular event in the event table. In brief
the instanceType refers to the type of sub-component
generating this event in the system, for example
switch (5). For…
InstanceType
Textual Convention: InstanceType Enumeration
Type Values:
1unknown
2node
3shelf
4line
5switch
6lsp
7l2Interface
8l3Interface
9rowIndex
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.4
eventInstanceId
This variable represents the InstanceId of a particular
event in the event current table. In brief the instanceId
refers to the sub-component generating this event in the
system, for example '1' for port 1. For more …
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.5
eventInstanceName
This variable is mainly used to store additional information
about the sub-component that is generating an event. For
example this field may specify what cooling fan is faulty.

DEPENDS ON: eventInstance…
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.6
eventSeverity
This variable dictates the urgency of action when a event
occurs. There are four severity levels - Critical, Major,
Minor, and Informational. Critical events are those, which
require immediate operator intervention t…
EventSeverity
Textual Convention: EventSeverity Enumeration
Type Values:
1critical
2major
3minor
4informational
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.7
eventSetTime
This table contains only normal events and this variable
represents the time when the event become active, i.e. the
number of seconds since Jan 1, 1970 12:00AM.
UtcTimeStamp
Textual Convention: UtcTimeStamp Unsigned32
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.8
eventDescription
This variable contains a description of the event and reasons
behind the event. This is a free format alpha-numeric string
that is set by the entity generating this event. This variable
may be empty if there is no us…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.9
eventServAffective
This variable indicates whether the event is service affective or not
EventServiceAffective
Textual Convention: EventServiceAffective Enumeration
Type Values:
1noServiceAffected
2serviceAffected
 .1.3.6.1.4.1.890.1.5.8.12.26.1.1.1.10