traceRouteCtlMiscOptions
ZYXEL-ES3124-MIB ·
.1.3.6.1.4.1.890.1.5.8.12.23.5.1.17
Object
Enables an application to specify implementation dependent options.
Context
- MIB
- ZYXEL-ES3124-MIB
- OID
.1.3.6.1.4.1.890.1.5.8.12.23.5.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- traceRouteCtlEntry
- Table
- traceRouteCtlTable
- Siblings
- 28
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| traceRouteCtlServInstType The type of the service instance that this traceRoute entry belong to.
1: VLAN.
This item would be used as an index | column | Enumeration | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.1 |
| traceRouteCtlProbesPerHop Specifies the number of times to reissue a traceroute
request with the same time-to-live (TTL) value. | column | probes Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.10 |
| traceRouteCtlPort Specifies the UDP port to send the traceroute
request to. Need to specify a port that is not in
use at the destination (target) host. The default
value for this object is the IA… | column | UDP Port Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.11 |
| traceRouteCtlMaxTtl Specifies the maximum time-to-live value. | column | time-to-live value Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.12 |
| traceRouteCtlDSField Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the traceroute probe. The DS Field is
defined as the Type of Service (… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.13 |
| traceRouteCtlSourceAddressType Specifies the type of the source address,
traceRouteCtlSourceAddress, to be used at a remote host
when performing a traceroute operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.14 |
| traceRouteCtlSourceAddress Use the specified IP address (which must be given
as an IP number, not a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this op… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.15 |
| traceRouteCtlIfIndex Setting this object to an interface's ifIndex prior
to starting a remote traceroute operation directs
the traceroute probes to be transmitted over the
specified interface. A valu… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.16 |
| traceRouteCtlMaxFailures The value of this object indicates the maximum number
of consecutive timeouts allowed before terminating
a remote traceroute request. A value of either 255 (maximum
hop count/pos… | column | timeouts Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.18 |
| traceRouteCtlDontFragment This object enables setting of the don't fragment flag (DF)
in the IP header for a probe. Use of this object enables
performing a manual PATH MTU test. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.19 |
| traceRouteCtlServInstId The ID of the service instance that this traceRoute entry belong to.
This item would be used as an index | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.2 |
| traceRouteCtlInitialTtl The value of this object specifies the initial TTL value to
use. This enables bypassing the initial (often well known)
portion of a path. | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.20 |
| traceRouteCtlFrequency The number of seconds to wait before repeating a
traceroute test as defined by the value of the
various objects in the corresponding row.
The number of hops in a single traceroute… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.21 |
| traceRouteCtlStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.22 |
| traceRouteCtlAdminStatus Reflects the desired state that an traceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this traceRouteCtlEntry.
disabl… | column | Enumeration | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.23 |
| traceRouteCtlDescr The purpose of this object is to provide a
descriptive name of the remote traceroute
test. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.24 |
| traceRouteCtlMaxRows The maximum number of entries allowed in the
traceRouteProbeHistoryTable. An implementation of
this MIB will remove the oldest entry in the
traceRouteProbeHistoryTable to allow t… | column | rows SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.25 |
| traceRouteCtlTrapGeneration The value of this object determines when and if to
to generate a notification for this entry:
pathChange(0) - Generate a traceRoutePathChange
notification when the current… | column | Bits | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.26 |
| traceRouteCtlCreateHopsEntries The current path for a traceroute test is kept in the
traceRouteHopsTable on a per hop basis when the value of
this object is true(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.27 |
| traceRouteCtlType The value of this object is used either to report or
select the implementation method to be used for
performing a traceroute operation. The value of this
object may be selected fr… | column | ObjectIdentifier | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.28 |
| traceRouteCtlRowStatus This object allows entries to be created and deleted
in the traceRouteCtlTable. Deletion of an entry in
this table results in all corresponding (same
traceRouteCtlOwnerIndex and … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.29 |
| traceRouteCtlOwnerIndex To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need… | column | OctetString | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.3 |
| traceRouteCtlTestName The name of a traceroute test. This is locally unique,
within the scope of an traceRouteCtlOwnerIndex. | column | OctetString | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.4 |
| traceRouteCtlTargetAddressType Specifies the type of host address to be used on the
traceroute request at the remote host. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.5 |
| traceRouteCtlTargetAddress Specifies the host address used on the
traceroute request at the remote host. The
host address type can be determined by the
examining the value of the corresponding
traceRouteCt… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.6 |
| traceRouteCtlByPassRouteTable The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.7 |
| traceRouteCtlDataSize Specifies the size of the data portion of a traceroute
request in octets. A traceroute request is essentially
transmitted by encoding a UDP datagram into a
IP packet. So subtract… | column | octets Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.8 |
| traceRouteCtlTimeOut Specifies the time-out value, in seconds, for
a traceroute request. | column | seconds Unsigned32 | .1.3.6.1.4.1.890.1.5.8.12.23.5.1.9 |