ZYXEL-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
43

zyxelClassifierTable

table
.1.3.6.1.4.1.890.1.15.3.10.1.1 · 1 row entry · 26 columns
Open in standard view 
The table contains classifier configuration.
zyxelClassifierEntry entry .1.3.6.1.4.1.890.1.15.3.10.1.1.1
An entry contains classifier configuration.
Indexes
zyClassifierName
Column Syntax OID
zyClassifierName
The name of classifier rule is used for identifying purposes.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.1
zyClassifierState
Enable/Disable classifier rule on this switch.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.2
zyClassifierPacketFormat
Packet format for classifier rule. A value of 802.3 indicates that the packets are
formatted according to the IEEE 802.3 standards. A value of Ethernet II indicates
that the packets are formatted according to RFC 894,…
Enumeration
Enumerated Values:
1all
2ethernetIIUntagged
3ethernetIITagged
4ethernet802dot3Untagged
5ethernet802dot3Tagged
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.3
zyClassifierVid
Source VLAN ID for classifier rule. The range is 1~4094 and value 0 means any VLAN.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.4
zyClassifier8021pPriority
802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.5
zyClassifierEthernetType
Ethernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.6
zyClassifierSourceMacAddress
Source MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.7
zyClassifierIncomingPort
Incoming Port for classifier rule. Value 65536 means any port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.8
zyClassifierDestinationMacAddress
Destination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.9
zyClassifierDSCP
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.10
zyClassifierIpProtocol
IP Protocol for classifier rule. Value 255 means any IP protocol.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.11
zyClassifierEstablishOnly
Establish Only for TCP protocol type in classifier rule.
This means that the switch will pick out the packets that are sent to establish TCP connections.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.12
zyClassifierSourceIpAddress
Source IP address for classifier rule. 0.0.0.0 means any source IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.13
zyClassifierSourceIpMaskBits
Source IP mask bits for classifier rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.14
zyClassifierSourceSocket
Source socket number for classifier rule. Value 0 means any socket number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.15
zyClassifierDestinationIpAddress
Destination IP address for classifier rule. 0.0.0.0 means any destination IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.16
zyClassifierDestinationIpMaskBits
Destination IP mask bits for classifier rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.17
zyClassifierDestinationSocket
Destination socket number for classifier rule. Value 0 means any socket number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.18
zyClassifierIPv6DSCP
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.19
zyClassifierIPv6NextHeader
IPv6 next header protocol type for classifier rule. Value 255 means any protocol type.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.20
zyClassifierIPv6EstablishOnly
Establish Only for TCP protocol type in classifier rule.
This means that the switch will pick out the packets that are sent to establish TCP connections.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.21
zyClassifierIPv6SourceIpAddress
IPv6 source address for classifier rule. :: means any IPv6 source ip address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.22
zyClassifierIPv6SourceIpPrefixLength
IPv6 source address prefix length for classifier rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.23
zyClassifierIPv6DestinationIpAddress
IPv6 destination address for classifier rule. :: means any IPv6 destination ip address.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.24
zyClassifierIPv6DestinationIpPrefixLength
IPv6 destination address prefix length for classifier rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.25
zyClassifierRowstatus
This object shows the entry of classifier rule status.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.15.3.10.1.1.1.26

zyxelPolicyTable

table
.1.3.6.1.4.1.890.1.15.3.10.2.1 · 1 row entry · 17 columns
Open in standard view 
The table contains policy configuration.
zyxelPolicyEntry entry .1.3.6.1.4.1.890.1.15.3.10.2.1.1
An entry contains policy configuration.
Indexes
zyPolicyName
Column Syntax OID
zyPolicyName
The name of policy rule is used for identifying purposes.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.1
zyPolicyState
Enable/Disable policy rule on this switch.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.2
zyPolicyClassifier
The classifier(s) applies in this policy rule.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.3
zyPolicyVid
VLAN ID for policy rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.4
zyPolicyEgressPort
The outgoing port number in this policy rule.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.5
zyPolicy8021pPriority
Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.6
zyPolicyDSCP
Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.7
zyPolicyTOS
Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.8
zyPolicyBandwidth
Specify the bandwidth for policy rule in kilobit per second (Kbps).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.9
zyPolicyOutOfProfileDSCP
Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.10
zyPolicyForwardingAction
There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets.
'Do not drop the matching frame previously marked for dropping' is retain the frames th…
Enumeration
Enumerated Values:
1noChange
2discardThePacket
3doNotDropTheMatchingFramePreviouslyMarkedForDropping
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.11
zyPolicyPriorityAction
There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames.
'Set the packet's 802.1 priority' is replace the packet's 802.1 priority field with the value you set in the Prior…
Enumeration
Enumerated Values:
1noChange
2setThePackets802dot1Priority
3sendThePacketToPriorityQueue
4replaceThe802dot1PriorityFieldWithTheIpTosValue
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.12
zyPolicyDiffServAction
There are four DiffServ actions for policy rule.
'No change' is keeping the TOS and/or DSCP fields in the packets.
'Set the packet's TOS field' is set the TOS field with the value you configure in the TOS field.
'Rep…
Enumeration
Enumerated Values:
1noChange
2setThePacketsTosField
3replaceTheIpTosFieldWithThe802dot1PriorityValue
4setTheDiffservCodepointFieldInTheFrame
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.13
zyPolicyOutgoingAction
There are four outgoing actions for policy rule.
'Send the packet to the mirror port' is sent the packet to the mirror port.
'Send the packet to the egress port' is sent the packet to the egress port.
'Send the match…
Bits
Enumerated Values:
0sendThePacketToTheMirrorPort
1sendThePacketToTheEgressPort
2sendTheMatchingFramesToTheEgressPort
3setThePacketVlanId
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.14
zyPolicyMeteringState
Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.15
zyPolicyOutOfProfileAction
There are four out of profile actions for policy rule.
'Drop the packet' is discard the out-of-profile traffic.
'Change the DSCP value' is replace the DSCP field with the value specified in the Out of profile DSCP fie…
Bits
Enumerated Values:
0dropThePacket
1changeTheDscpValue
2setOutDropPrecedence
3doNotDropTheMatchingFramePreviouslyMarkedForDropping
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.16
zyPolicyRowstatus
This object shows the entry of policy rule status.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.890.1.15.3.10.2.1.1.17