zyPolicyPriorityAction
ZYXEL-ACL-MIB ·
.1.3.6.1.4.1.890.1.15.3.10.2.1.1.12
Object
column
Enumeration
There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packet's 802.1 priority field with the value you set in the Priority field. 'Send the packet to priority queue' is put the packets in the designated queue. 'Replace the 802.1 priority field with the IP TOS value' to replace the packet's 802.1 priority field with the value you set in the TOS field.
Context
- MIB
- ZYXEL-ACL-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.10.2.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zyxelPolicyEntry
- Table
- zyxelPolicyTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noChange |
2 | setThePackets802dot1Priority |
3 | sendThePacketToPriorityQueue |
4 | replaceThe802dot1PriorityFieldWithTheIpTosValue |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyPolicyName The name of policy rule is used for identifying purposes. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.1 |
| zyPolicyOutOfProfileDSCP Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.10 |
| zyPolicyForwardingAction There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets.
'Do not drop the matching frame previously mark… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.11 |
| zyPolicyDiffServAction There are four DiffServ actions for policy rule.
'No change' is keeping the TOS and/or DSCP fields in the packets.
'Set the packet's TOS field' is set the TOS field with the val… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.13 |
| zyPolicyOutgoingAction There are four outgoing actions for policy rule.
'Send the packet to the mirror port' is sent the packet to the mirror port.
'Send the packet to the egress port' is sent the pac… | column | Bits | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.14 |
| zyPolicyMeteringState Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.15 |
| zyPolicyOutOfProfileAction There are four out of profile actions for policy rule.
'Drop the packet' is discard the out-of-profile traffic.
'Change the DSCP value' is replace the DSCP field with the value … | column | Bits | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.16 |
| zyPolicyRowstatus This object shows the entry of policy rule status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.17 |
| zyPolicyState Enable/Disable policy rule on this switch. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.2 |
| zyPolicyClassifier The classifier(s) applies in this policy rule. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.3 |
| zyPolicyVid VLAN ID for policy rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.4 |
| zyPolicyEgressPort The outgoing port number in this policy rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.5 |
| zyPolicy8021pPriority Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.6 |
| zyPolicyDSCP Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.7 |
| zyPolicyTOS Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.8 |
| zyPolicyBandwidth Specify the bandwidth for policy rule in kilobit per second (Kbps). | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.2.1.1.9 |