zyClassifierEstablishOnly
ZYXEL-ACL-MIB ·
.1.3.6.1.4.1.890.1.15.3.10.1.1.1.12
Object
column
P-BRIDGE-MIBEnabledStatus
Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
Context
- MIB
- ZYXEL-ACL-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.10.1.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- zyxelClassifierEntry
- Table
- zyxelClassifierTable
- Siblings
- 25
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyClassifierName The name of classifier rule is used for identifying purposes. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.1 |
| zyClassifierDSCP DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.10 |
| zyClassifierIpProtocol IP Protocol for classifier rule. Value 255 means any IP protocol. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.11 |
| zyClassifierSourceIpAddress Source IP address for classifier rule. 0.0.0.0 means any source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.13 |
| zyClassifierSourceIpMaskBits Source IP mask bits for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.14 |
| zyClassifierSourceSocket Source socket number for classifier rule. Value 0 means any socket number. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.15 |
| zyClassifierDestinationIpAddress Destination IP address for classifier rule. 0.0.0.0 means any destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.16 |
| zyClassifierDestinationIpMaskBits Destination IP mask bits for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.17 |
| zyClassifierDestinationSocket Destination socket number for classifier rule. Value 0 means any socket number. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.18 |
| zyClassifierIPv6DSCP DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.19 |
| zyClassifierState Enable/Disable classifier rule on this switch. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.2 |
| zyClassifierIPv6NextHeader IPv6 next header protocol type for classifier rule. Value 255 means any protocol type. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.20 |
| zyClassifierIPv6EstablishOnly Establish Only for TCP protocol type in classifier rule.
This means that the switch will pick out the packets that are sent to establish TCP connections. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.21 |
| zyClassifierIPv6SourceIpAddress IPv6 source address for classifier rule. :: means any IPv6 source ip address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.22 |
| zyClassifierIPv6SourceIpPrefixLength IPv6 source address prefix length for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.23 |
| zyClassifierIPv6DestinationIpAddress IPv6 destination address for classifier rule. :: means any IPv6 destination ip address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.24 |
| zyClassifierIPv6DestinationIpPrefixLength IPv6 destination address prefix length for classifier rule. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.25 |
| zyClassifierRowstatus This object shows the entry of classifier rule status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.26 |
| zyClassifierPacketFormat Packet format for classifier rule. A value of 802.3 indicates that the packets are
formatted according to the IEEE 802.3 standards. A value of Ethernet II indicates
that the pac… | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.3 |
| zyClassifierVid Source VLAN ID for classifier rule. The range is 1~4094 and value 0 means any VLAN. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.4 |
| zyClassifier8021pPriority 802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.5 |
| zyClassifierEthernetType Ethernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.6 |
| zyClassifierSourceMacAddress Source MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.7 |
| zyClassifierIncomingPort Incoming Port for classifier rule. Value 65536 means any port. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.8 |
| zyClassifierDestinationMacAddress Destination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.890.1.15.3.10.1.1.1.9 |