ZTE-AN-CFM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
81
zxAnCfmMaNetTable
table.1.3.6.1.4.1.3902.1015.62.1.2.1
·
1 row entry
·
3 columns
The Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance.
This is the part of the complete MA table that is constant
across all Bridges in a Maintenance Domain, and across all
components of a single Bridge. That part of the MA table that
can vary from Bridge component to Bridge component is contained
in the dot1agCfmMaCompTable.
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs. Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity. The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance. Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances. A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.19 and 18.2).
This table uses two indices, first index is the index of the
Maintenance Domain table. The second index is the same as the
index of the dot1agCfmMaCompEntry for the same MA.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
The MA table entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnCfmMaNetCcmDaType
Indicates the type of CCM DA(destination MAC address),
which should be unicast or multicastclass1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.2.1.1.1 |
||||||||||
|
zxAnCfmMaProtect
Indicates the type of CCM DA(destination MAC address),
which should be unicast or multicastclass1. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.2.1.1.2 |
||||||||||
| zxAnCfmMaTunnel | Unsigned32r/w Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.3902.1015.62.1.2.1.1.3 |
zxAnCfmMepTable
table.1.3.6.1.4.1.3902.1015.62.1.3.1
·
1 row entry
·
66 columns
CFM Mep Table
CFM Mep Entry
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnCfmMepCcCheckEnable
Enabled or disabled the CCM frame defect checking.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.1 |
||||||||
|
zxAnCfmMepLmEnable
Enabled or disabled the ETH-LM functions.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.2 |
||||||||
|
zxAnCfmMepDmEnable
Enabled or disabled the ETH-DM functions.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.3 |
||||||||
|
zxAnCfmMepLbmTestType
Indicates the type of ETH-LBM is unicast or multicast.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.4 |
||||||||
|
zxAnCfmMepLbmAppType
Indicates the app type of ETH-LBM, which means to verify
bidirectional connectivity of a MEP with a MIP or a peer MEP, or to perform a bidirectional in-service or out-of-service diagnostics test between a pair of pee… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.5 |
||||||||
|
zxAnCfmMepLmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address. This address will be used if the value of the column dot1agCfmMepLmTargetIsMepId is 'false'. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.6 |
||||||||
|
zxAnCfmMepLmTargetMepId
An indication of the Target MAC Address Field to be
transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column d… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.7 |
||||||||
|
zxAnCfmMepLmTargetIsMepId
True indicates that MEPID of the target MEP is used for
Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for LM transmission. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.8 |
||||||||
|
zxAnCfmMepLmmDaType
Indicates the da type of LMM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.9 |
||||||||
|
zxAnCfmMepLmEndType
Indicates the end type of ETH-LM, which should be one-ended
or two-ended. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.10 |
||||||||
|
zxAnCfmMepLmInterval
The interval at which LMMs are sent by a MEP, the default
value is 5 seconds. |
secondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.11 |
||||||||
|
zxAnCfmMepLmDuration
The time of duration of ETH-LM test, the default value is
60 seconds. |
secondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.12 |
||||||||
|
zxAnCfmMepLmPriority
The priority value for LMMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for t… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.13 |
||||||||
|
zxAnCfmMepLmFarendLoss
The number of far-end frame loss.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.14 |
||||||||
|
zxAnCfmMepLmNearendLoss
The number of near-end frame loss.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.15 |
||||||||
|
zxAnCfmMepLmLossRatio
The near-end frame loss ratio in percent.
|
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.16 |
||||||||
|
zxAnCfmMepLmStatus
A Boolean flag set to true by the MEP LM Initiator State
Machine or an MIB manager to indicate that another LM is being transmitted. Reset to false by the MEP LM Initiator State Machine. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.17 |
||||||||
|
zxAnCfmMepLmResultOk
Indicates the result of the operation:
- true The Loss Measurement Message(s) will be (or has been) sent. - false The Loss Measurement Message(s) will not be sent. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.18 |
||||||||
|
zxAnCfmMepLmFarendLossRatio
The far-end frame loss ratio in percent.
|
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.19 |
||||||||
|
zxAnCfmMepDmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address. This address will be used if the value of the column dot1agCfmMepDmTargetIsMepId is 'false'. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.30 |
||||||||
|
zxAnCfmMepDmTargetMepId
An indication of the Target MAC Address Field to be
transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column d… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.31 |
||||||||
|
zxAnCfmMepDmTargetIsMepId
True indicates that MEPID of the target MEP is used for Linktrace
transmission. False indicates that unicast destination MAC address of the target MEP is used for DM transmission. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.32 |
||||||||
|
zxAnCfmMep1dmDaType
The da type of 1DM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.33 |
||||||||
|
zxAnCfmMepDdmDaType
The da type of DDM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.34 |
||||||||
|
zxAnCfmMepDmWayType
The DM way type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.35 |
||||||||
|
zxAnCfmMepDmInterval
The interval at which DMMs are sent by a MEP, the default value
is 5 seconds. |
secondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.36 |
||||||||
|
zxAnCfmMepDmDuration
The time of duration of ETH-DM test, the default value is
60 seconds. |
secondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.37 |
||||||||
|
zxAnCfmMepDmPriority
The priority value for DMMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for t… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.38 |
||||||||
|
zxAnCfmMepDmOneWayAvgDelay
The number of One-way Frame Delay.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.39 |
||||||||
|
zxAnCfmMepDmOneWayAvgDv
The number of One-way Frame Delay variation.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.40 |
||||||||
|
zxAnCfmMepDmTwoWayAvgDelay
The number of Two-way Frame Delay.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.41 |
||||||||
|
zxAnCfmMepDmTwoWayAvgDv
The number of Two-way Frame Delay variation.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.42 |
||||||||
|
zxAnCfmMepDmStatus
A Boolean flag set to true by the MEP DM Initiator State
Machine or an MIB manager to indicate that another LBM is being transmitted. Reset to false by the MEP DM Initiator State Machine. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.43 |
||||||||
|
zxAnCfmMepDmResultOk
Indicates the result of the operation:
- true The Delay Measurement Message(s) will be (or has been) sent. - false The Delay Measurement Message(s) will not be sent. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.44 |
||||||||
|
zxAnCfmMepTestTlvLength
The length of test TLV.
This object can be used if the value of the column zxAnCfmMepTestTlvEnable is 'enable'. |
Unsigned32r/w Constraints: range: 0-200 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.54 |
||||||||
|
zxAnCfmMepTestEnable
Enabled or disabled the ETH-Test functions.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.55 |
||||||||
|
zxAnCfmMepTestAppType
Indicates the app type of ETH-Test, which means to
perform a bidirectional in-service or out-of-service diagnostics test between a pair of peer MEPs. This includes verifying bandwidth throughput, frame loss, bit error… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.56 |
||||||||
|
zxAnCfmMepTestDestMacAddress
The destination MAC address field to be transmitted: A unicast
destination MAC address. This address will be used if the value of the column zxAnCfmMepTestDestIsMepId is 'false'. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.57 |
||||||||
|
zxAnCfmMepTestDestMepId
The maintenance association end point identifier of another
MEP in the same maintenance association to which the ETH-Test message is to be sent. This address will be used if the value of the column zxAnCfmMepTestDestIs… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.58 |
||||||||
|
zxAnCfmMepTestDestIsMepId
True indicates that MEPID of the destination MEP is used for
ETH-Test transmission. False indicates that unicast destination MAC address of the target MEP is used for ETH-Test transmission. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.59 |
||||||||
|
zxAnCfmMepTestInterval
The interval value for ETH-Test messages transmitted by the MEP.
the default value is 1000 milliseconds. |
millisecondsInteger32r/w Constraints: range: 100-10000 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.60 |
||||||||
|
zxAnCfmMepTestDuration
The time of duration of ETH-Test, the default value is
60 seconds. |
secondsInteger32r/w Constraints: range: 1-3600 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.61 |
||||||||
|
zxAnCfmMepTestPriority
The priority value for ETH-Test Messages transmitted by the MEP.
Default value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the defaul… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.62 |
||||||||
|
zxAnCfmMepTestDaType
The destination address type of ETH-Test Message.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.63 |
||||||||
|
zxAnCfmMepTestTlvEnable
Enabled or disabled ETH-Test TLV.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.64 |
||||||||
|
zxAnCfmMepTestPattern
Indicates the test pattern.
This pattern will be used if the value of the column zxAnCfmMepTestTlvEnable is 'enable'. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.65 |
||||||||
|
zxAnCfmMepTestStatus
A Boolean flag set to true by the MEP TEST initiator state
machine or an MIB manager to indicate that another ETH-Test is being done. Reset to false by the MEP TEST initiator state machine. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.66 |
||||||||
|
zxAnCfmMepTestResultOk
Indicates the result of the operation:
- true The ETH-Test message(s) will be (or has been) sent. - false The ETH-Test message(s) will not be sent. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.67 |
||||||||
|
zxAnCfmMepTestMsgSeqNumber
The ETH-Test transaction identifier
(zxAnCfmMepTestNextMsgSeqNumber) of the first ETH-Test message(to be) sent. The value returned is undefined if zxAnCfmMepTestResultOk is false. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.68 |
||||||||
|
zxAnCfmMepTestNextMsgSeqNumber
Next sequence number/transaction identifier to be sent in a
ETH-Test message. This sequence number can be zero because it wraps around. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.69 |
||||||||
|
zxAnCfmMepTestTransmitRate
Indicates the maximum transmission rate at which frames with
ETH-Test information can be sent. |
kbpsUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.70 |
||||||||
|
zxAnCfmMepTestFarendLossRatio
The far-end frame loss ratio in percent.
|
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.71 |
||||||||
|
zxAnCfmMepTestFarendBitErrRatio
The far-end received bit error ratio in percent.
|
Integer32 Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.72 |
||||||||
|
zxAnCfmMepAisEnable
Enabled or disabled the ETH-AIS functions.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.87 |
||||||||
|
zxAnCfmMepLckEnable
Enabled or disabled the ETH-LCK functions.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.88 |
||||||||
|
zxAnCfmMepAisClientMegLevel
MEG level at which the most immediate client layer MIPs and MEPs
exist. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.89 |
||||||||
|
zxAnCfmMepLckClientMegLevel
MEG level at which the most immediate client layer MIPs and MEPs
exist. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.90 |
||||||||
|
zxAnCfmMepAisLckInterval
The interval value for AISMs and LCKMs transmitted by the MEP.
the default value is 1 second. |
secondsInteger32r/w Constraints: range: 1-600 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.91 |
||||||||
|
zxAnCfmMepAisPriority
The priority value for AISMs transmitted by the MEP.
Default value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for … |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.92 |
||||||||
|
zxAnCfmMepLckPriority
The priority value for LCKMs transmitted by the MEP.
Default value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for … |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.93 |
||||||||
|
zxAnCfmMepAisDaType
The destination address type of AISM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.94 |
||||||||
|
zxAnCfmMepLckDaType
The destination address type of LCKM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.95 |
||||||||
|
zxAnCfmMepAisStatus
This object represents if MEP is in AIS status or not.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.96 |
||||||||
|
zxAnCfmMepLckStatus
This object represents if MEP is in LCK status or not.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.97 |
||||||||
|
zxAnCfmMepLckSendEnable
This object represents if LCK message can be sent by the MEP.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.98 |
||||||||
|
zxAnCfmMepRdiStatus
This object represents if MEP is in RDI status or not.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.1.1.99 |
.1.3.6.1.4.1.3902.1015.62.1.3.2
·
1 row entry
·
2 columns
Remote Mep Config Table
Remote Mep Config Entry
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnCfmRemoteMepMacAddress
The MAC address of the remote MEP.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.62.1.3.2.1.1 |
||||||||||||
|
zxAnCfmRemoteMepConfRowStatus
The rowstatus of this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.2.1.20 |
zxAnCfmMipTable
table.1.3.6.1.4.1.3902.1015.62.1.3.3
·
1 row entry
·
2 columns
CFM Mip Table
CFM Mip Entry
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnCfmMipIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached. Upon a restart of the system, the system SHAL… |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.3.3.1.1 |
||||||||||||
|
zxAnCfmMipRowStatus
The rowstatus of this table.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.62.1.3.3.1.20 |
zxAnCfmIfTable
table.1.3.6.1.4.1.3902.1015.62.1.5.1
·
1 row entry
·
8 columns
The CFM interface table. This table specifies CFM interface configuration.
The CFM interface entry.
Indexes
zxAnCfmRack zxAnCfmShelf zxAnCfmSlot zxAnCfmPort zxAnCfmOnu zxAnCfmIfType zxAnCfmLogicalId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
zxAnCfmRack
Rack number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.1 |
||||
|
zxAnCfmShelf
Shelf number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.2 |
||||
|
zxAnCfmSlot
Slot number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.3 |
||||
|
zxAnCfmPort
The port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.4 |
||||
|
zxAnCfmOnu
The ONU number. It is 0 in DSL port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.5 |
||||
|
zxAnCfmIfType
Type of the interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.6 |
||||
|
zxAnCfmLogicalId
Logic index of the interface.
If zxAnCfmIfType is 'physicalPort', its value is 0. If zxAnCfmIfType is 'onuUni', this object indicates 'onuSlot.uniId', this type is used for SFUs only. If th… |
ObjectIdentifier | .1.3.6.1.4.1.3902.1015.62.1.5.1.1.7 |
||||
|
zxAnCfmIfOamPduFilterEnable
This object controls whether the Ethernet OAMPDU
filtering is enabled on specific interface. A disable(2) value will prevent the Ethernet OAMPDU filtering action on specific interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.62.1.5.1.1.8 |