ZHONE-MAU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
34
.1.3.6.1.4.1.5504.5.1.1 · 1 row entry · 21 columns
Table of descriptive and status information
about the phsyical Enet	interface.
zhoneIfMauEntry entry .1.3.6.1.4.1.5504.5.1.1.1
An entry in the table, containing information
about a single physical Enet interface.
Indexes
zhoneMauIfIndex
Column Syntax OID
zhoneMauIfIndex
This variable uniquely identifies the interface
to which the Ethernet/MAU described by this entry
is connected.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.5504.5.1.1.1.1
zhoneMauType
Physical Interface Type
Enumerationr/w
Enumerated Values:
1mauOther
5mau10BaseT
10mau10BaseTHD
11mau10BaseTFD
15mau100BaseTXHD
16mau100BaseTXFD
22mau1000BaseLXHD
23mau1000BaseLXFD
25mau1000BaseSXHD
26mau1000BaseSXFD
29mau1000BaseTHD
30mau1000BaseTFD
31mau10gBaseX
32mau10gBaseR
33mau10gBaseW
34mau10gBaseLX4
35mau10gBaseSR
36mau10gBaseSW
37mau10gBaseLR
38mau10gBaseLW
39mau10gBaseER
40mau10gBaseEW
.1.3.6.1.4.1.5504.5.1.1.1.2
zhoneMauOperStatus
The current operational state of the MAU.

other(1) is returned if the MAU or interface is in
a state other than one of the states 2 through 6.

unknown(2) is returned when the true state of …
Enumeration
Enumerated Values:
1other
2unknown
3operational
4standby
5shutdown
6reset
.1.3.6.1.4.1.5504.5.1.1.1.3
zhoneMauMediaAvailable
If the MAU or interface is a link or fiber type
(FOIRL, 10BASE-T, 10BASE-F) then this is
equivalent to the link test fail state/low light
function. For an AUI MAU this indicates whether
or not loopback is detected on th…
Enumeration
Enumerated Values:
1other
2unknown
3available
4notAvailable
5remoteFault
6invalidSignal
7remoteJabber
8remoteLinkLoss
9remoteTest
10offline
11autoNegError
.1.3.6.1.4.1.5504.5.1.1.1.4
zhoneMauMediaAvailStateExits
A count of the number of times that
zhoneMauMediaAvailable for this MAU or interface
instance leaves the state available(3).

Discontinuities in the value of this counter can
occur at re-initialization of …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5504.5.1.1.1.5
zhoneMauJabberState
The value other(1) is returned if the jabber
state is not 2, 3, or 4.

unknown(2) is returned when the MAU's true state
is unknown; e.g. when it is being initialized.

If the MAU is not jabbe…
Enumeration
Enumerated Values:
1other
2unknown
3noJabber
4jabbering
.1.3.6.1.4.1.5504.5.1.1.1.6
zhoneMauJabberingStateEnters
A count of the number of times that
zhoneMauJabberState for this MAU or interface
instance enters the state jabbering(4). This
counter will always indicate zero for MAUs of
ype dot1MauTypeAUI and those of speeds above
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5504.5.1.1.1.7
zhoneMauFalseCarriers
A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.

For all other MAU or inetrafce types, this counter
will always indicate zero. This counter does not
increment a…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.5504.5.1.1.1.8
zhoneMauDefaultType
Physical interface type.
Enumeration
Enumerated Values:
1mauOther
5mau10BaseT
10mau10BaseTHD
11mau10BaseTFD
15mau100BaseTXHD
16mau100BaseTXFD
22mau1000BaseLXHD
23mau1000BaseLXFD
25mau1000BaseSXHD
26mau1000BaseSXFD
29mau1000BaseTHD
30mau1000BaseTFD
31mau10gBaseX
32mau10gBaseR
33mau10gBaseW
34mau10gBaseLX4
35mau10gBaseSR
36mau10gBaseSW
37mau10gBaseLR
38mau10gBaseLW
39mau10gBaseER
40mau10gBaseEW
.1.3.6.1.4.1.5504.5.1.1.1.9
zhoneMauAutoNegSupported
This object indicates whether or not
auto-negotiation is supported.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.5504.5.1.1.1.10
zhoneMauTypeListBits
A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapability.

Note that this MAU …
Bits
Enumerated Values:
0bOther
1bAUI
2b10base5
3bFoirl
4b10base2
5b10baseT
6b10baseFP
7b10baseFB
8b10baseFL
9b10broad36
10b10baseTHD
11b10baseTFD
12b10baseFLHD
13b10baseFLFD
14b100baseT4
15b100baseTXHD
16b100baseTXFD
17b100baseFXHD
18b100baseFXFD
19b100baseT2HD
20b100baseT2FD
21b1000baseXHD
22b1000baseXFD
23b1000baseLXHD
24b1000baseLXFD
25b1000baseSXHD
26b1000baseSXFD
27b1000baseCXHD
28b1000baseCXFD
29b1000baseTHD
30b1000baseTFD
31b10gbaseX
32b10gbaseR
33b10gbaseW
34b10gbaseLX4
35b10gbaseSR
36b10gbaseSW
37b10gbaseLR
38b10gbaseLW
39b10gbaseER
40b10gbaseEW
.1.3.6.1.4.1.5504.5.1.1.1.11
zhoneMauClkSrc
Clock source for timing.
Unused - unused
Automatic - Master/Slave is decided during autonegotiation
Master - Clocked from local source
Slave - Loop timing from the received data stream
Enumerationr/w
Enumerated Values:
1unused
2automatic
3master
4slave
.1.3.6.1.4.1.5504.5.1.1.1.12
zhoneMauPauseFlowControl
When autonegotiation is enabled (zhoneMauAutoNegSupported is true),
this Pause Flow Control field is used to program the advertised
pause capabilities.

When autonegotiation is disabled (manual negotiation…
Enumerationr/w
Enumerated Values:
1disabled
2asymmetricTx
3asymmetricRx
4symmetric
5passthrough
.1.3.6.1.4.1.5504.5.1.1.1.13
zhoneMauAggregationMode
On: The link aggregation is forced to be formed without any
LACP negotiation .In other words, the switch will neither send the
LACP packet nor process any incoming LACP packet. This is similar
to the on state for PAgP.
Enumerationr/w
Enumerated Values:
1on
2off
3passive
4active
.1.3.6.1.4.1.5504.5.1.1.1.14
zhoneMauLinkStateMirror
ifIndex of another physical interface whose link state will be mirrored on
this MAU. This is used to propagate a link fault observed on one physical
interface onto another interface.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.5504.5.1.1.1.15
zhoneMauSetPauseTime
Used to set the pause interval. Units are in pause_quanta.

Currently not supported.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.5504.5.1.1.1.16
zhoneMauMaxFrameSize
Used to set the max frame size for ethernet ports.
Units are bytes. Range is 0 15360. 0 is default implying 2048 bytes.
Integer32r/w
Constraints:
range: 0-15360
.1.3.6.1.4.1.5504.5.1.1.1.17
zhoneMauIngressRate
Used to set the ingress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.
KbpsInteger32r/w
Constraints:
range: 0-10240000
.1.3.6.1.4.1.5504.5.1.1.1.18
zhoneMauIngressBurstSize
Used to set the ingress burst size for ethernet ports.
Units are Kbits. Range is 0 512000. 0 is default implying no restriction.
KbitsInteger32r/w
Constraints:
range: 0-512000
.1.3.6.1.4.1.5504.5.1.1.1.19
zhoneMauEgressRate
Used to set the egress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.
KbpsInteger32r/w
Constraints:
range: 0-10240000
.1.3.6.1.4.1.5504.5.1.1.1.20
zhoneMauEgressBurstSize
Used to set the egress burst size for ethernet ports.
Units are Kbits. Range is 0 512000. 0 is default implying no restriction.
KbitsInteger32r/w
Constraints:
range: 0-512000
.1.3.6.1.4.1.5504.5.1.1.1.21
.1.3.6.1.4.1.5504.5.1.2 · 1 row entry · 9 columns
Configuration and status objects for the
auto-negotiation function of MAUs attached to
interfaces.
zhoneMauAutoNegEntry entry .1.3.6.1.4.1.5504.5.1.2.1
An entry in the table, containing configuration
and status information for the auto-negotiation
function of a particular MAU.
Indexes
zhoneMauIfIndex
Column Syntax OID
zhoneMauAutoNegAdminStatus
Setting this object to enabled(1) will cause
the interface which has the auto-negotiation
signaling ability to be enabled.

If the value of this object is disabled(2) then
the interface will act as it woul…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.5504.5.1.2.1.1
zhoneMauAutoNegRemoteSignaling
A value indicating whether the remote end of
the link is using auto-negotiation signaling. It
takes the value detected(1) if and only if,
during the previous link negotiation, FLP Bursts
were received.
Enumeration
Enumerated Values:
1detected
2notdetected
.1.3.6.1.4.1.5504.5.1.2.1.2
zhoneMauAutoNegConfig
A value indicating the current status of the
auto-negotiation process. The enumeration
parallelDetectFail(5) maps to a failure in
parallel detection as defined in 28.2.3.1 of
[IEEE 802.3 Std].
Enumeration
Enumerated Values:
1other
2configuring
3complete
4disabled
5parallelDetectFail
.1.3.6.1.4.1.5504.5.1.2.1.3
zhoneMauAutoNegRestart
If the value of this object is set to restart(1)
then this will force auto-negotiation to begin
link renegotiation. If auto-negotiation signaling
is disabled, a write to this object
has no effect.

Setting…
Enumerationr/w
Enumerated Values:
1restart
2norestart
.1.3.6.1.4.1.5504.5.1.2.1.4
zhoneMauAutoNegCapabilityBits
A value that uniquely identifies the set of
capabilities of the local auto-negotiation
entity. Note that interfaces that support this
MIB may have capabilities that extend beyond the
scope of this MIB.

N…
Bits
Enumerated Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bfdxPause
9bfdxAPause
10bfdxSPause
11bfdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10gbaseX
17b10gbaseR
18b10gbaseW
19b10gbaseLX4
20b10gbaseSR
21b10gbaseSW
22b10gbaseLR
23b10gbaseLW
24b10gbaseER
25b10gbaseEW
.1.3.6.1.4.1.5504.5.1.2.1.5
zhoneMauAutoNegCapAdvertBits
A value that uniquely identifies the set of
capabilities advertised by the local
auto-negotiation entity.

Capabilities in this object that are not
available in ifMauAutoNegCapabilityBits cannot
be enabled…
Bitsr/w
Enumerated Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10gbaseX
17b10gbaseR
18b10gbaseW
19b10gbaseLX4
20b10gbaseSR
21b10gbaseSW
22b10gbaseLR
23b10gbaseLW
24b10gbaseER
25b10gbaseEW
.1.3.6.1.4.1.5504.5.1.2.1.6
zhoneMauAutoNegCapRecvBits
A value that uniquely identifies the set of
capabilities received from the remote
auto-negotiation entity.

Note that interfaces that support this MIB may
be attached to remote auto-negotiation entities
wh…
Bits
Enumerated Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
16b10gbaseX
17b10gbaseR
18b10gbaseW
19b10gbaseLX4
20b10gbaseSR
21b10gbaseSW
22b10gbaseLR
23b10gbaseLW
24b10gbaseER
25b10gbaseEW
.1.3.6.1.4.1.5504.5.1.2.1.7
zhoneMauAutoNegRemoteFaultAdvert
A value that identifies any local fault
indications that this MAU has detected and will
advertise at the next auto-negotiation
interaction for 1000Mbps MAUs.
Enumerationr/w
Enumerated Values:
1noError
2offline
3linkFailure
4autoNegError
.1.3.6.1.4.1.5504.5.1.2.1.8
zhoneMauAutoNegRemoteFaultRecv
A value that identifies any fault indications
received from the far end of a link by the
local auto-negotiation entity for 1000Mbps
MAUs.
Enumeration
Enumerated Values:
1noError
2offline
3linkFailure
4autoNegError
.1.3.6.1.4.1.5504.5.1.2.1.9
.1.3.6.1.4.1.5504.5.1.4 · 1 row entry · 4 columns
Table of Identifiers specifying the partner system to which an	aggregation is connected.
zhoneLinkAggEntry entry .1.3.6.1.4.1.5504.5.1.4.1
An entry in the table, containing information
about a single partner system aggregation.
Indexes
zhoneLinkAggIfIndex
Column Syntax OID
zhoneLinkAggIfIndex
This variable uniquely identifies the link
aggregation by which the profile described
in this entry is identified.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.5504.5.1.4.1.1
zhoneLinkAggPartnerSystem
A six-byte identifier, similar to a MAC address,
specifying the partner system, but stored as a
string, and specified in the pattern
'nn:nn:nn:nn:nn:nn', where 'nn' is a hex number
specifying a byte of the pattern.
OctetString
Constraints:
range: 0-18
.1.3.6.1.4.1.5504.5.1.4.1.2
zhoneLinkAggPartnerSystemPriority
An integer further specifying the partner system.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.1.4.1.3
zhoneLinkAggPartnerGroupId
An integer identifier specifying the link group.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.1.4.1.4