zhoneMauEgressBurstSize
ZHONE-MAU-MIB ·
.1.3.6.1.4.1.5504.5.1.1.1.21
Object
column
r/w
Kbits Integer32
Used to set the egress burst size for ethernet ports. Units are Kbits. Range is 0 512000. 0 is default implying no restriction.
Context
- MIB
- ZHONE-MAU-MIB
- OID
.1.3.6.1.4.1.5504.5.1.1.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Kbits
- Parent
- zhoneIfMauEntry
- Table
- zhoneIfMauTable
- Siblings
- 20
Syntax
Kbits Integer32
Values & Constraints
Object Constraints
range: 0-512000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneMauIfIndex This variable uniquely identifies the interface
to which the Ethernet/MAU described by this entry
is connected. | column | Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.1 |
| zhoneMauAutoNegSupported This object indicates whether or not
auto-negotiation is supported. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.1.1.1.10 |
| zhoneMauTypeListBits A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapabi… | column | Bits | .1.3.6.1.4.1.5504.5.1.1.1.11 |
| zhoneMauClkSrc Clock source for timing.
Unused - unused
Automatic - Master/Slave is decided during autonegotiation
Master - Clocked from local source
Slave - Loop timing from the received data … | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.12 |
| zhoneMauPauseFlowControl When autonegotiation is enabled (zhoneMauAutoNegSupported is true),
this Pause Flow Control field is used to program the advertised
pause capabilities.
When autoneg… | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.13 |
| zhoneMauAggregationMode On: The link aggregation is forced to be formed without any
LACP negotiation .In other words, the switch will neither send the
LACP packet nor process any incoming LACP packet. Th… | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.14 |
| zhoneMauLinkStateMirror ifIndex of another physical interface whose link state will be mirrored on
this MAU. This is used to propagate a link fault observed on one physical
interface onto another interf… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.5.1.1.1.15 |
| zhoneMauSetPauseTime Used to set the pause interval. Units are in pause_quanta.
Currently not supported. | column | Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.16 |
| zhoneMauMaxFrameSize Used to set the max frame size for ethernet ports.
Units are bytes. Range is 0 15360. 0 is default implying 2048 bytes. | column | Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.17 |
| zhoneMauIngressRate Used to set the ingress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit. | column | Kbps Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.18 |
| zhoneMauIngressBurstSize Used to set the ingress burst size for ethernet ports.
Units are Kbits. Range is 0 512000. 0 is default implying no restriction. | column | Kbits Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.19 |
| zhoneMauType Physical Interface Type | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.2 |
| zhoneMauEgressRate Used to set the egress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit. | column | Kbps Integer32 | .1.3.6.1.4.1.5504.5.1.1.1.20 |
| zhoneMauOperStatus The current operational state of the MAU.
other(1) is returned if the MAU or interface is in
a state other than one of the states 2 through 6.
unknow… | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.3 |
| zhoneMauMediaAvailable If the MAU or interface is a link or fiber type
(FOIRL, 10BASE-T, 10BASE-F) then this is
equivalent to the link test fail state/low light
function. For an AUI MAU this indicates w… | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.4 |
| zhoneMauMediaAvailStateExits A count of the number of times that
zhoneMauMediaAvailable for this MAU or interface
instance leaves the state available(3).
Discontinuities in the value of this co… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.5.1.1.1.5 |
| zhoneMauJabberState The value other(1) is returned if the jabber
state is not 2, 3, or 4.
unknown(2) is returned when the MAU's true state
is unknown; e.g. when it is being initialized… | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.6 |
| zhoneMauJabberingStateEnters A count of the number of times that
zhoneMauJabberState for this MAU or interface
instance enters the state jabbering(4). This
counter will always indicate zero for MAUs of
ype d… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.5.1.1.1.7 |
| zhoneMauFalseCarriers A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.
For all other MAU or inetrafce types, this counter
will always indicate… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.5504.5.1.1.1.8 |
| zhoneMauDefaultType Physical interface type. | column | Enumeration | .1.3.6.1.4.1.5504.5.1.1.1.9 |