zhoneMauTypeListBits

ZHONE-MAU-MIB · .1.3.6.1.4.1.5504.5.1.1.1.11
MIB view Table view

Object

column Bits 
A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map	to ifMauAutoNegCapability.
              
Note that this MAU may be capable of operating
as a MAU type that is beyond the scope of this
MIB.  This is indicated	by returning the
bit value bOther in addition to	any bit	values
for capabilities that are listed above.

Context

MIB
ZHONE-MAU-MIB
OID
.1.3.6.1.4.1.5504.5.1.1.1.11
Type
column
Access
readonly
Status
current
Parent
zhoneIfMauEntry
Table
zhoneIfMauTable
Siblings
20

Syntax

Bits

Values & Constraints

Enumerated Values
0bOther
1bAUI
2b10base5
3bFoirl
4b10base2
5b10baseT
6b10baseFP
7b10baseFB
8b10baseFL
9b10broad36
10b10baseTHD
11b10baseTFD
12b10baseFLHD
13b10baseFLFD
14b100baseT4
15b100baseTXHD
16b100baseTXFD
17b100baseFXHD
18b100baseFXFD
19b100baseT2HD
20b100baseT2FD
21b1000baseXHD
22b1000baseXFD
23b1000baseLXHD
24b1000baseLXFD
25b1000baseSXHD
26b1000baseSXFD
27b1000baseCXHD
28b1000baseCXFD
29b1000baseTHD
30b1000baseTFD
31b10gbaseX
32b10gbaseR
33b10gbaseW
34b10gbaseLX4
35b10gbaseSR
36b10gbaseSW
37b10gbaseLR
38b10gbaseLW
39b10gbaseER
40b10gbaseEW

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhoneMauIfIndex
This variable uniquely identifies the interface to which the Ethernet/MAU described by this entry is connected.
columnInteger32.1.3.6.1.4.1.5504.5.1.1.1.1
zhoneMauAutoNegSupported
This object indicates whether or not auto-negotiation is supported.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.5.1.1.1.10
zhoneMauClkSrc
Clock source for timing. Unused - unused Automatic - Master/Slave is decided during autonegotiation Master - Clocked from local source Slave - Loop timing from the received data …
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.12
zhoneMauPauseFlowControl
When autonegotiation is enabled (zhoneMauAutoNegSupported is true), this Pause Flow Control field is used to program the advertised pause capabilities. When autoneg…
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.13
zhoneMauAggregationMode
On: The link aggregation is forced to be formed without any LACP negotiation .In other words, the switch will neither send the LACP packet nor process any incoming LACP packet. Th…
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.14
zhoneMauLinkStateMirror
ifIndex of another physical interface whose link state will be mirrored on this MAU. This is used to propagate a link fault observed on one physical interface onto another interf…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.5.1.1.1.15
zhoneMauSetPauseTime
Used to set the pause interval. Units are in pause_quanta. Currently not supported.
columnInteger32.1.3.6.1.4.1.5504.5.1.1.1.16
zhoneMauMaxFrameSize
Used to set the max frame size for ethernet ports. Units are bytes. Range is 0 15360. 0 is default implying 2048 bytes.
columnInteger32.1.3.6.1.4.1.5504.5.1.1.1.17
zhoneMauIngressRate
Used to set the ingress rate for ethernet ports. Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.
columnKbps Integer32.1.3.6.1.4.1.5504.5.1.1.1.18
zhoneMauIngressBurstSize
Used to set the ingress burst size for ethernet ports. Units are Kbits. Range is 0 512000. 0 is default implying no restriction.
columnKbits Integer32.1.3.6.1.4.1.5504.5.1.1.1.19
zhoneMauType
Physical Interface Type
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.2
zhoneMauEgressRate
Used to set the egress rate for ethernet ports. Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.
columnKbps Integer32.1.3.6.1.4.1.5504.5.1.1.1.20
zhoneMauEgressBurstSize
Used to set the egress burst size for ethernet ports. Units are Kbits. Range is 0 512000. 0 is default implying no restriction.
columnKbits Integer32.1.3.6.1.4.1.5504.5.1.1.1.21
zhoneMauOperStatus
The current operational state of the MAU. other(1) is returned if the MAU or interface is in a state other than one of the states 2 through 6. unknow…
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.3
zhoneMauMediaAvailable
If the MAU or interface is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI MAU this indicates w…
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.4
zhoneMauMediaAvailStateExits
A count of the number of times that zhoneMauMediaAvailable for this MAU or interface instance leaves the state available(3). Discontinuities in the value of this co…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.5504.5.1.1.1.5
zhoneMauJabberState
The value other(1) is returned if the jabber state is not 2, 3, or 4. unknown(2) is returned when the MAU's true state is unknown; e.g. when it is being initialized…
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.6
zhoneMauJabberingStateEnters
A count of the number of times that zhoneMauJabberState for this MAU or interface instance enters the state jabbering(4). This counter will always indicate zero for MAUs of ype d…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.5504.5.1.1.1.7
zhoneMauFalseCarriers
A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU or inetrafce types, this counter will always indicate…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.5504.5.1.1.1.8
zhoneMauDefaultType
Physical interface type.
columnEnumeration.1.3.6.1.4.1.5504.5.1.1.1.9