TIMETRA-SAS-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

sasTmnxPortExtnTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.2 · 1 row entry · 7 columns

Open in standard view

This table has additional information about the 7210 platforms

sasTmnxPortExtnEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.2.1

Each row entry represents a port on a IOM card in a chassis in the
system. Entries cannot be created and deleted via SNMP SET
operations. Before an IOM tmnxMDAEntry can be deleted from the
tmnxMDATable, its support…

Indexes

No indexes recorded

Column Syntax OID

tmnxPortUplinkMode

If the tmnxPortUplinkMode is set to true when the tmnxPortMode
is set to 'access(1)' and the port acts as an uplink.
'tmnxPortEncaptype' must also be configured 'qinqEncap'
when using access port as uplink port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.1

tmnxPortAccessEgressQoSPolicyId

Qos Policy ID for Access Egress Port

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.2

tmnxPortNetworkQoSPolicyId

Port Network Policy ID

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.3

tmnxPortShgName

Split horizon group to be attached to this port

TN-TC-MIBTNamedItemOrEmptyr/w

Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString

Type Constraints:
range: 0..32

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.4

tmnxPortUseDei

Enable/disable DEI based policing.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.5

tmnxPortOperGrpName

System oper group to be attached to this port

TN-TC-MIBTNamedItemOrEmptyr/w

Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString

Type Constraints:
range: 0..32

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.6

tmnxPortMonitorOperGrpName

System monitor oper group to be attached to this port

TN-TC-MIBTNamedItemOrEmptyr/w

Textual Convention: TN-TC-MIBTNamedItemOrEmpty OctetString

Type Constraints:
range: 0..32

.1.3.6.1.4.1.6527.6.2.2.2.2.2.1.7

tmnxSASPortNetIngressStatsTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.3 · 1 row entry · 5 columns

Open in standard view

Defines the Alcatel SAS series network port ingress 
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical Meters
being used for the ports to forward the network ingress
traffic.

tmnxSASPortNetIngressStatsEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.3.1

Defines an entry in tmnxSASPortNetIngressStatsTable. Entries are
created and deleted by the system depending on the meter policy
being used at the specific port.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID tmnxSASPortNetIngressMeterIndex

Column	Syntax	OID
tmnxSASPortNetIngressMeterIndex 'tmnxSASPortNetIngressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed sy…	TN-TC-MIBTNetworkIngressMeterId Textual Convention: TN-TC-MIBTNetworkIngressMeterId `Integer32` Type Constraints: `range: 0..16`	`.1.3.6.1.4.1.6527.6.2.2.2.2.3.1.1`
tmnxSASPortNetIngressFwdInProfPkts tmnxSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.3.1.2`
tmnxSASPortNetIngressFwdOutProfPkts tmnxSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.3.1.3`
tmnxSASPortNetIngressFwdInProfOcts tmnxSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.3.1.4`
tmnxSASPortNetIngressFwdOutProfOcts tmnxSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.3.1.5`

sasTmnxPortEtherExtnTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.4 · 1 row entry · 26 columns

Open in standard view

This table has additional information about the 7210 platforms

sasTmnxPortEtherExtnEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.4.1

Each row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an IOM 'cardEntry'
can be deleted from the tmnxMDATable, its s…

Indexes

No indexes recorded

Column Syntax OID

tmnxPortEtherEgressMaxBurst

Controls the amount of burst the egress port can generate.
Its configured in terms of Kilo bits.Its an optional parameter.
And cannot be used without egress-rate being set.

Integer32r/w

Constraints:
range: -1--1
range: 32-16384

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1

tmnxPortStatsQueue1PktsFwd

If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress
packets with forwarding class value '0'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.2

tmnxPortStatsQueue2PktsFwd

If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress
packets with forwarding class value '1'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.3

tmnxPortStatsQueue3PktsFwd

If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress
packets with forwarding class value '2'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.4

tmnxPortStatsQueue4PktsFwd

If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress
packets with forwarding class value '3'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.5

tmnxPortStatsQueue5PktsFwd

If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress
packets with forwarding class value '5'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.6

tmnxPortStatsQueue6PktsFwd

If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress
packets with forwarding class value '6'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.7

tmnxPortStatsQueue7PktsFwd

If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress
packets with forwarding class value '7'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.8

tmnxPortStatsQueue8PktsFwd

If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress
packets with forwarding class value '8'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.9

tmnxPortEtherEgrSchedMode

tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In
'fc-based' mode the prority of all the egress queues across all the
SAPs are considered to determine the next queue to schedule. In
'sap-based' mode the…

Enumerationr/w

Enumerated Values:

1	fc-based
2	sap-based

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.10

tmnxPortEtherLoopback

If tmnxPortEtherLoopback is set to internal, the ethernet port
is set to loopback mode. none will clear the loopback

Enumerationr/w

Enumerated Values:

0	none
2	internal

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.11

tmnxPortEtherIpMTU

tmnxPortEtherIpMTU is the IP MTU for interfaces using this
port

bytesUnsigned32r/w

Constraints:
range: 0-0
range: 512-9000

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.12

tmnxPortEtherClockConfig

When the value of tmnxPortEtherClockConfig is 'automatic' the
Ethernet interface will automatically negotiate clock mastership
along with other link parameters with the far end. Depending
upon the capabilities of the …

Enumerationr/w

Enumerated Values:

0	notApplicable
1	automatic
2	manual-master
3	manual-slave

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13

tmnxPortLoopbckServId

Loopback Service Id

TN-TC-MIBTmnxServIdr/w

Textual Convention: TN-TC-MIBTmnxServId Unsigned32

Type Constraints:
range: 0..2147483650

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.14

tmnxPortLoopbckSapPortId

Loopback Sap Port Id

TN-TC-MIBTmnxPortIDr/w

Textual Convention: TN-TC-MIBTmnxPortID Integer32

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.15

tmnxPortLoopbckSapEncapVal

Loopback Sap Encapsulation

TN-TC-MIBTmnxEncapValr/w

Textual Convention: TN-TC-MIBTmnxEncapVal Unsigned32

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.16

tmnxPortLoopbckSrcMacAddr

Loopback Source Mac Address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.17

tmnxPortLoopbckDstMacAddr

Loopback Destination Mac Address

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.18

tmnxPortAccEgrSapQosMarking

Port Ethernet Access Egress Sap Qos Marking

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.19

tmnxPortLldpTnlNrstBrdgeDstMac

If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true'
and admin status is disabled lldp pkts will be
tunnelled

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.20

tmnxPortEtherDe1OutProfile

The value of tmnxPortEtherDe1OutProfile if enabled
will consider the value of the DEI(CFI) bit of the incoming
packet , which if 1 will result in the packet being classified
as out-profile and in-profile otherwise

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.22

tmnxPortEtherNwAggRateLimit

The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic on a hybrid port.

Integer32r/w

Constraints:
range: -1--1
range: 1-100000000

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.23

tmnxPortEtherNwAggRateLimitCir

The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic cir rate on a hybrid port.

Integer32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.28

tmnxPortEtherNwAggRateLimitPir

The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic cir rate on a hybrid port.

Integer32r/w

Constraints:
range: -1--1
range: 1-10000000

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.29

tmnxPortEtherDcommStatus

The value of tmnxPortEtherDcommStatus is true if this port
is decommissioned

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.30

tmnxPortEtherMulticastIngress

Defines multicast ingress lookup type

Enumerationr/w

Enumerated Values:

1	l2-mc
2	ip-mc

.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.31

portShgInfoTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.6 · 1 row entry · 5 columns

Open in standard view

A table that contains port split-horizon group
information.

portShgInfoEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.6.1

Split-horizon group information about a TLS service.

Indexes

portShgName

Column Syntax OID

portShgName

The value of the object portShgName specifies the name of
the split-horizon group.

TN-TC-MIBTNamedItem

Textual Convention: TN-TC-MIBTNamedItem OctetString

Type Constraints:
range: 1..32

.1.3.6.1.4.1.6527.6.2.2.2.2.6.1.1

portShgRowStatus

The value of the object portShgRowStatus specifies the
status of this row.
The only values supported during a set operation are
createAndGo(4) and destroy(6). To delete an entry
from this table, there should be no port…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6527.6.2.2.2.2.6.1.2

portShgInstanceId

The value of the object portShgInstanceId indicates the
instance identifier for the split horizon group.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.6.1.3

portShgDescription

The value of the object portShgDescription specifies
generic information about this split-horizon group.

TIMETRA-SERV-MIBServObjDescr/w

Textual Convention: TIMETRA-SERV-MIBServObjDesc OctetString

Type Constraints:
range: 0..80

.1.3.6.1.4.1.6527.6.2.2.2.2.6.1.4

portShgLastMgmtChange

The value of the object portShgLastMgmtChange indicates the
value of sysUpTime at the time of the most recent
management-initiated change to this split-horizon group.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.6527.6.2.2.2.2.6.1.5

tmnxPortAccessEgressQueueStatsTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.7 · 1 row entry · 5 columns

Open in standard view

Defines the Alcatel SAS series access port egress 
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the access egress
traffic.

tmnxPortAccessEgressQueueStatsEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.7.1

Defines an entry in tmnxPortAccessEgressQueueStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID tmnxPortAccessEgressQueueStatsIndex

Column	Syntax	OID
tmnxPortAccessEgressQueueStatsIndex 'tmnxPortAccessEgressQueueIndex' serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a access egress queue for the specified port in the managed syste…	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.6527.6.2.2.2.2.7.1.1`
tmnxPortAccessEgressQueueStatsFwdPkts tmnxPortAccessEgressQueueStatsFwdPkts indicates the number of forwarded access egress packets forwarded on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.7.1.2`
tmnxPortAccessEgressQueueStatsFwdOcts tmnxPortAccessEgressQueueStatsFwdOcts indicates the number of forward access egress octets forwarded on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.7.1.3`
tmnxPortAccessEgressQueueStatsDroPkts tmnxPortAccessEgressQueueStatsDroPkts indicates the number of dropped access egress packets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.7.1.4`
tmnxPortAccessEgressQueueStatsDroOcts tmnxPortAccessEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.7.1.5`

tmnxPortNetEgressQueueStatsTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.8 · 1 row entry · 9 columns

Open in standard view

Defines the Alcatel SAS series network port egress 
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network egress
traffic.

tmnxPortNetEgressQueueStatsEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.8.1

Defines an entry in tmnxPortNetEgressQueueStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID tmnxPortNetEgressQueueStatsIndex

Column	Syntax	OID
tmnxPortNetEgressQueueStatsIndex tmnxPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network egress queue for the specified port in the managed syst…	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.1`
tmnxPortNetEgressQueueStatsFwdPkts tmnxPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.2`
tmnxPortNetEgressQueueStatsFwdOcts tmnxPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.3`
tmnxPortNetEgressQueueStatsDroPkts tmnxPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.4`
tmnxPortNetEgressQueueStatsDroOcts tmnxPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.5`
tmnxPortNetEgressQueueStatsInProfDroPkts tmnxPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.6`
tmnxPortNetEgressQueueStatsInProfDroOcts tmnxPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.7`
tmnxPortNetEgressQueueStatsOutProfDroPkts tmnxPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.8`
tmnxPortNetEgressQueueStatsOutProfDroOcts tmnxPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6527.6.2.2.2.2.8.1.9`

aluExtTmnxDS1PortTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.9 · 1 row entry · 1 columns

Open in standard view

The aluExtTmnxDS1PortTable has an entry for a DS1 physical port.

aluExtTmnxDS1PortEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.9.1

Each row entry represents extended functionality of a physical
DS1 port on Alcatel-Lucent 7210 SAS devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be created or del…

Indexes

No indexes recorded

Column Syntax OID

aluExtDS1PortLineImpedance

The value of aluExtDS1PortLineImpedance indicates the current line
impedance set on the physical T1/E1 port.

T1 Ports may only be configured to have an impedance of 100 Ohms.

E1 Ports may …

Enumerationr/w

Enumerated Values:

0	notApplicable
1	impedance75Ohms
2	impedance100Ohms
3	impedance120Ohms

.1.3.6.1.4.1.6527.6.2.2.2.2.9.1.1

aluPortAcrClkStatsTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.10 · 1 row entry · 12 columns

Open in standard view

Defines the Alcatel-Lucent SAR series port adaptive clock
recovery (ACR) statistics table for providing, via SNMP, the 
capability of retrieving statistical information relating
to clock that is derived from the ACR CPIPE PW.

aluPortAcrClkStatsEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.10.1

Defines an entry in aluPortAcrClkStatsTable. Entries are
created and deleted by the system depending port
configuration.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID

Column Syntax OID

aluLastUpdateTime

The last time the ACR statistics were updated

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.1

aluTotalMinutesIn24Hour

The number of minutes in alu24HourFreqOffsetMeanPpb
and alu24HourFreqOffsetStdDevPpb

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.2

aluCurrent24HourFreqOffsetMeanPpb

aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset
from the local oscillator clock in parts per billion for up to the
last 24 hour.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.3

aluCurrent24HourFreqOffsetStdDevPpb

aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the
frequency offset from the local oscillator clock in parts per billion
for up to the last 24 hour.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.4

aluMaxShortIntervalMinutes

'aluMaxShortIntervalMinutes' the maximum number of 'aluStatsShortIntervalIndexes'.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.5

aluTotalShortIntervalMinutes

'aluTotalShortIntervalMinutes' is the number of 'aluStatsShortIntervalIndexes'
that have valid statistics

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.6

aluCurrent1MinValidData

This variable indicates if the data for the first
interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.7

aluCurrent1MinPhaseErrorMeanPpb

The mean phase error from the local oscillator clock
in parts per billion during the first interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.8

aluCurrent1MinPhaseErrorStdDevNs

The standard deviation of the phase error from the local
oscillator clock in nano seconds during the first interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.9

aluCurrent1MinPhaseErrorMeanNs

The mean of the phase error from the local
oscillator clock in nano seconds during the first interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.10

aluCurrent1MinFreqOffsetMeanPpb

The mean frequency offset from the local oscillator clock
in parts per billion during the first interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.11

aluCurrent1MinFreqOffsetStdDevPpb

The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the first interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.10.1.12

aluPortAcrClkStatsShortIntervalTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.11 · 1 row entry · 8 columns

Open in standard view

The Port ACR Clock Interval Table contains various
statistics collected by each adaptively timed port
over the previous 15 minutes. The past 15 minutes are
broken into 15 1 minute intervals.  Each 
row in this table represents one such interval 
(identified by aluAcrClkIntervalNumber).

aluPortAcrClkStatsShortIntervalEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.11.1

An entry in the Port ACR Clock Interval table.

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex TIMETRA-PORT-MIBtmnxPortPortID aluIntervalNumber

Column Syntax OID

aluIntervalNumber

A number between 1 and 15, where 1 is the most
recently completed 1 minute interval and 15 is
the 1 minutes interval completed 14 minutes prior
to interval 1.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.1

aluIntervalValidData

This variable indicates if the data for this
interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.2

aluIntervalUpdateTime

The update time of the ACR interval statistics

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.3

aluIntervalPhaseErrorMeanPpb

The mean phase error from the local oscillator clock
in parts per billion during the interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.4

aluIntervalPhaseErrorStdDevNs

The standard deviation of the phase error from the local
oscillator clock in nano seconds during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.5

aluIntervalPhaseErrorMeanNs

The mean of the phase error from the local
oscillator clock in nano seconds during the interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.6

aluIntervalFreqOffsetMeanPpb

The mean frequency offset from the local oscillator clock
in parts per billion during the interval.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.7

aluIntervalFreqOffsetStdDevPpb

The standard deviation of the frequency offset from the
local oscillator clock in nano seconds during the interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6527.6.2.2.2.2.11.1.8

aluExtTmnxDS1Table

table

.1.3.6.1.4.1.6527.6.2.2.2.2.12 · 1 row entry · 1 columns

Open in standard view

The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel.

aluExtTmnxDS1Entry entry .1.3.6.1.4.1.6527.6.2.2.2.2.12.1

Each row entry represents extended functionality of a DS1 physical
port or channel on Alcatel-Lucent 7210 SAS devices. Entries cannot be
created or deleted via SNMP SET operations. Entries in this table
will be cre…

Indexes

No indexes recorded

Column	Syntax	OID
aluExtDS1SignalBitsState aluExtDS1SignalBitsState is an array of bytes used to indicate the current state of the ABCD signalling bits for all timeslots of a DS1/E1. The first half of the array or the 32 most significant bytes des…	OctetString Constraints: `range: 64-64`	`.1.3.6.1.4.1.6527.6.2.2.2.2.12.1.3`

aluExtPethPsePortTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.13 · 1 row entry · 3 columns

Open in standard view

The aluExtPethPsePortTable has an entry for a table of objects 
that display and control the power characteristics of power Ethernet 
ports on a Power Source Entity (PSE) device.

aluExtPethPsePortEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.13.1

Each row entry represents the extended functionality of a power Ethernet
port

Indexes

No indexes recorded

Column Syntax OID

aluExtPethPsePortFaultReason

Reason for a detection status failure:
none (1)
dcp (2) - Positive DC supply connected at the port
hicap (3) - High Capacitance at the port
rlow (4) - Low Resistance at the port
detok (5) - detection ok
rhigh …

Enumeration

Enumerated Values:

1	none
2	dcp
3	hicap
4	rlow
5	detok
6	rhigh
7	open
8	dcn
9	tstart
10	icv
11	tcut
12	dis
13	sup
14	pdeny

.1.3.6.1.4.1.6527.6.2.2.2.2.13.1.1

aluExtPethPsePortPowerLevel

none (1) The interface does not provide the PoE function.
standard (2) The interface provides the standard PoE power level.
plus (3) The interface provides the higher power 'Poe Plus' PSE function

Enumerationr/w

Enumerated Values:

1	none
2	standard
3	plus

.1.3.6.1.4.1.6527.6.2.2.2.2.13.1.2

aluExtPethPsePortOperStatus

The operational status of the port PSE.

Enumeration

Enumerated Values:

1	notApplicable
2	on
3	off

.1.3.6.1.4.1.6527.6.2.2.2.2.13.1.3

tmnxVirtualPortTable

table

.1.3.6.1.4.1.6527.6.2.2.2.2.15 · 1 row entry · 3 columns

Open in standard view

The port table has an entry for each virtual port

tmnxVirtualPortEntry entry .1.3.6.1.4.1.6527.6.2.2.2.2.15.1

Each row entry represents a virtual port

Indexes

TIMETRA-CHASSIS-MIBtmnxChassisIndex tmnxVirtualPortPortID

Column Syntax OID

tmnxVirtualPortPortID

tmnxVirtualPortPortID is an index into this table

TN-TC-MIBTmnxPortID

Textual Convention: TN-TC-MIBTmnxPortID Integer32

.1.3.6.1.4.1.6527.6.2.2.2.2.15.1.1

tmnxVirtualPortInUse

tmnxVirtualPortInUse describes whether the virtual port is used by an application or not.

Enumeration

Enumerated Values:

1	not-in-use
2	mirror
3	macswap
4	testhead

.1.3.6.1.4.1.6527.6.2.2.2.2.15.1.2

tmnxVirtualPortSpeed

tmnxVirtualPortSpeed describes the speed of the virtual ports.

Enumeration

Enumerated Values:

1	one-gig
2	ten-gig

.1.3.6.1.4.1.6527.6.2.2.2.2.15.1.3