tmnxPortEtherEgressMaxBurst
TIMETRA-SAS-PORT-MIB ·
.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1
Object
column
r/w
Integer32
Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
Context
- MIB
- TIMETRA-SAS-PORT-MIB
- OID
.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sasTmnxPortEtherExtnEntry
- Table
- sasTmnxPortEtherExtnTable
- Siblings
- 25
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1--1
range: 32-16384
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tmnxPortEtherEgrSchedMode tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In
'fc-based' mode the prority of all the egress queues across all the
SAPs are considered to determine the next que… | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.10 |
| tmnxPortEtherLoopback If tmnxPortEtherLoopback is set to internal, the ethernet port
is set to loopback mode. none will clear the loopback | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.11 |
| tmnxPortEtherIpMTU tmnxPortEtherIpMTU is the IP MTU for interfaces using this
port | column | bytes Unsigned32 | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.12 |
| tmnxPortEtherClockConfig When the value of tmnxPortEtherClockConfig is 'automatic' the
Ethernet interface will automatically negotiate clock mastership
along with other link parameters with the far end. … | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13 |
| tmnxPortLoopbckServId Loopback Service Id | column | TN-TC-MIBTmnxServId | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.14 |
| tmnxPortLoopbckSapPortId Loopback Sap Port Id | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.15 |
| tmnxPortLoopbckSapEncapVal Loopback Sap Encapsulation | column | TN-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.16 |
| tmnxPortLoopbckSrcMacAddr Loopback Source Mac Address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.17 |
| tmnxPortLoopbckDstMacAddr Loopback Destination Mac Address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.18 |
| tmnxPortAccEgrSapQosMarking Port Ethernet Access Egress Sap Qos Marking | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.19 |
| tmnxPortStatsQueue1PktsFwd If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress
packets with forwarding class value '0'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.2 |
| tmnxPortLldpTnlNrstBrdgeDstMac If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true'
and admin status is disabled lldp pkts will be
tunnelled | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.20 |
| tmnxPortEtherDe1OutProfile The value of tmnxPortEtherDe1OutProfile if enabled
will consider the value of the DEI(CFI) bit of the incoming
packet , which if 1 will result in the packet being classified
as… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.22 |
| tmnxPortEtherNwAggRateLimit The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic on a hybrid port. | column | Integer32 | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.23 |
| tmnxPortEtherNwAggRateLimitCir The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic cir rate on a hybrid port. | column | Integer32 | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.28 |
| tmnxPortEtherNwAggRateLimitPir The value of tmnxPortEtherNwAggRateLimit in kbps is used
to cap network traffic cir rate on a hybrid port. | column | Integer32 | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.29 |
| tmnxPortStatsQueue2PktsFwd If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress
packets with forwarding class value '1'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.3 |
| tmnxPortEtherDcommStatus The value of tmnxPortEtherDcommStatus is true if this port
is decommissioned | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.30 |
| tmnxPortEtherMulticastIngress Defines multicast ingress lookup type | column | Enumeration | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.31 |
| tmnxPortStatsQueue3PktsFwd If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress
packets with forwarding class value '2'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.4 |
| tmnxPortStatsQueue4PktsFwd If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress
packets with forwarding class value '3'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.5 |
| tmnxPortStatsQueue5PktsFwd If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress
packets with forwarding class value '5'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.6 |
| tmnxPortStatsQueue6PktsFwd If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress
packets with forwarding class value '6'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.7 |
| tmnxPortStatsQueue7PktsFwd If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress
packets with forwarding class value '7'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.8 |
| tmnxPortStatsQueue8PktsFwd If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress
packets with forwarding class value '8'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.9 |