tmnxPortEtherClockConfig

TIMETRA-SAS-PORT-MIB · .1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13
MIB view Table view

Object

column r/w Enumeration 
When the value of tmnxPortEtherClockConfig is 'automatic' the 
Ethernet interface will automatically negotiate clock mastership
along with other link parameters with the far end. Depending 
upon the capabilities of the two ends, one will be master the 
other will be slave for clocking. 
When the value of tmnxPortEtherClockConfig is 'manual-master', the 
Ethernet interface will negotiate other link parameters with the 
far end except clock mastership. It assumes clock mastership and want 
the other end to be slave. 
When the value is 'manual-slave' this ethernet interface chooses to 
be slave and wants the far end to assume clock mastership. 
For 10 baseT and 100 baseT ethernet interfaces, value of this 
variable should be 'none', as this will not be applicable 
for those interfaces.

Context

MIB
TIMETRA-SAS-PORT-MIB
OID
.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.13
Type
column
Access
readwrite
Status
current
Parent
sasTmnxPortEtherExtnEntry
Table
sasTmnxPortEtherExtnTable
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
0notApplicable
1automatic
2manual-master
3manual-slave

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tmnxPortEtherEgressMaxBurst
Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
columnInteger32.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.1
tmnxPortEtherEgrSchedMode
tmnxPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next que…
columnEnumeration.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.10
tmnxPortEtherLoopback
If tmnxPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback
columnEnumeration.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.11
tmnxPortEtherIpMTU
tmnxPortEtherIpMTU is the IP MTU for interfaces using this port
columnbytes Unsigned32.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.12
tmnxPortLoopbckServId
Loopback Service Id
columnTN-TC-MIBTmnxServId.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.14
tmnxPortLoopbckSapPortId
Loopback Sap Port Id
columnTN-TC-MIBTmnxPortID.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.15
tmnxPortLoopbckSapEncapVal
Loopback Sap Encapsulation
columnTN-TC-MIBTmnxEncapVal.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.16
tmnxPortLoopbckSrcMacAddr
Loopback Source Mac Address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.17
tmnxPortLoopbckDstMacAddr
Loopback Destination Mac Address
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.18
tmnxPortAccEgrSapQosMarking
Port Ethernet Access Egress Sap Qos Marking
columnEnumeration.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.19
tmnxPortStatsQueue1PktsFwd
If tmnxPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.2
tmnxPortLldpTnlNrstBrdgeDstMac
If tmnxPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.20
tmnxPortEtherDe1OutProfile
The value of tmnxPortEtherDe1OutProfile if enabled will consider the value of the DEI(CFI) bit of the incoming packet , which if 1 will result in the packet being classified as…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.22
tmnxPortEtherNwAggRateLimit
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic on a hybrid port.
columnInteger32.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.23
tmnxPortEtherNwAggRateLimitCir
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
columnInteger32.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.28
tmnxPortEtherNwAggRateLimitPir
The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap network traffic cir rate on a hybrid port.
columnInteger32.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.29
tmnxPortStatsQueue2PktsFwd
If tmnxPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.3
tmnxPortEtherDcommStatus
The value of tmnxPortEtherDcommStatus is true if this port is decommissioned
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.30
tmnxPortEtherMulticastIngress
Defines multicast ingress lookup type
columnEnumeration.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.31
tmnxPortStatsQueue3PktsFwd
If tmnxPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.4
tmnxPortStatsQueue4PktsFwd
If tmnxPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.5
tmnxPortStatsQueue5PktsFwd
If tmnxPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.6
tmnxPortStatsQueue6PktsFwd
If tmnxPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.7
tmnxPortStatsQueue7PktsFwd
If tmnxPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.8
tmnxPortStatsQueue8PktsFwd
If tmnxPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6527.6.2.2.2.2.4.1.9