TIMETRA-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
104

tLagConfigTable

table
.1.3.6.1.4.1.6527.3.1.2.15.2 · 1 row entry · 47 columns
Open in standard view 
Configuration information about each Link Aggregation Group.
tLagConfigEntry entry .1.3.6.1.4.1.6527.3.1.2.15.2.1
An entry (conceptual row) in the tLagConfigTable. Each entry
represents a Link Aggregation Group. Create or destroy rows to add or
remove Link Aggregation Groups (LAG).

After tLagRowStatus is set to active(…
Indexes
tLagIndex
Column Syntax OID
tLagIndex
the number of the Link Aggregation Group.
TIMETRA-TC-MIBLAGInterfaceNumber
Textual Convention: TIMETRA-TC-MIBLAGInterfaceNumber Integer32
Type Constraints:
range: 1..800
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.1
tLagRowStatus
RowStatus for this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.2
tLagPortThreshold
tLagPortThreshold is a threshold for tLagPortThresholdAction.

When a physical port link state changes and the number of operational
physical ports is less than or equal to tLagPortThreshold,
tLagPortThres…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.3
tLagPortThresholdAction
Port Threshold Action is action to take when the number of operational
(link up) physical ports is less than tLagPortThreshold.

When a physical port ifOperStatus changes and the number of
operational phys…
Enumerationr/w
Enumerated Values:
1down
2dynamicCost
3staticCost
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.4
tLagEnableMarkerGenerator
enables (true(1)) or disables (false(2)) the Marker Generator
protocol.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.5
tLagEnableLACP
enables (true(1)) or disables (false(2)) the Link Aggregation Control
Protocol (LACP).

The value of tLagEnableLACP can only be set to 'true(1)' when
tLagStandbySignaling is set to 'lacp(1)' and the value …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.6
tLagDescription
Description text for the Link Aggregation Group port.
OctetStringr/w
Constraints:
range: 0-160
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.7
tLagDynamicCosting
When dynamic cost and OSPF autocost are both configured then costing
is applied based on the total number of links configured and the cost
is advertised inversely proportional to the number of links available
at the tim…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.8
tLagLACPMode
tLagLACPMode represents the mode in which LACP will operate. If the
value is set to 'passive', LACP places all member ports of a lag into
a passive negotiating state. When this is the case member ports of the
lag respon…
Enumerationr/w
Enumerated Values:
1passive
2active
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.9
tLagLACPAdminKeyAutogen
tLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key
in the dot3adAggActorAdminKey object was auto generated.
tLagLACPAdminKeyAutogen is set to 'false', if the lag administrative
key was manually confi…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.10
tLagLACPTransmitInterval
tLagLACPTransmitInterval configures the timer interval for periodic
transmission of LACP packets. If set to 'slow', LACP packets are
transmitted every 30 seconds. If set to 'fast', LACP packets are
transmitted every sec…
Enumerationr/w
Enumerated Values:
1slow
2fast
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.11
tLagAccessAdaptQos
The value of tLagAccessAdaptQos specifies how the LAG SAP queue and
virtual scheduler buffering and rate parameters are adapted over
multiple active MDAs.
link (1) - The LAG will create the SAP queues and virt…
Enumerationr/w
Enumerated Values:
1link
2distribute
3portFair
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.12
tLagLACPXmitStdby
The value of tLagLACPXmitStdby specifies whether or not LACP messages
are transmitted on standby-links.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.13
tLagLACPSelCrit
The value of tLagLACPSelCrit specifies which selection criteria should
be used to select the active sub-group.
Enumerationr/w
Enumerated Values:
1highestCount
2highestWeight
3bestPort
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.14
tLagLACPSelCritSlaveToPartner
The value of tLagLACPSelCritSlaveToPartner specifies together with
tLagLACPSelCrit selection criteria should be used to select the
active sub-group.
The term 'eligible member' refers to a lag-member link which can
pot…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.15
tLagLACPNbrOfSubGroups
The value of tLagLACPNbrOfSubGroups indicates the number of subgroups
configured in this LAG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.16
tLagholdTimeDown
The value of tLagholdTimeDown specifies the timer in 0.1 second
units which controls the delay between detecting that a LAG is down
(all active ports are down) and reporting it to the higher levels.
The default value f…
decisecondsUnsigned32r/w
Constraints:
range: 0-2000
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.17
tLagPortType
The value of tLagPortType specifies the type of ports allowed in this
LAG.

A value of 'standard (1)' allows all non-HSMDA and non-HS type
ports to be added to this LAG. A value of 'hsmdaV2 (3)'
limits th…
Enumerationr/w
Enumerated Values:
1standard
3hsmdaV2
4hs
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.18
tLagPerFpIngQueuing
The value of tLagPerFpIngQueuing specifies whether a more efficient
method of queue allocation for LAG SAPs should be utilized.

An 'inconsistentValue' error is returned if this object is set to a
differen…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.19
tLagSystemId
The value of the object tLagSystemId specifies A 6-octet MAC address
used as a unique identifier for the System that contains this
Aggregator.

If set to zero, the dot3adAggActorSystemID will be used as id…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.20
tLagSystemPriority
The value of the object tLagSystemPriority specifies a 2-octet value
indicating the priority value associated with the Actor's System ID.

If set to -1, the priority is taken from the object
dot3adAggActor…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.21
tLagStandbySignaling
The value of tLagStandbySignaling specifies how the state of a member
port is signalled to the remote side when the tLagPortActiveStdby
corresponding to this member port has the value 'standby'.

lacp …
Enumerationr/w
Enumerated Values:
1lacp
2powerOff
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.22
tLagPerLinkHash
The value of tLagPerLinkHash specifies whether SAP or interface
associated with this LAG will send traffic over a single link of a LAG
auto-rebalancing as links are added and removed from this LAG.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.23
tLagPerFpEgrQueuing
The value of tLagPerFpEgrQueuing specifies whether a more efficient
method of queue allocation for LAG SAPs should be utilized.

An 'inconsistentValue' error is returned if this object is set to a
differen…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.24
tLagIncludeEgrHashCfg
The value of tLagIncludeEgrHashCfg specifies whether explicitly
configured hashing should factor into the egress buffering and rate
distribution (tLagAccessAdaptQos).

When the value of tLagIncludeEgrHashC…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.25
tLagPerFpSapInstance
The value of tLagPerFpSapInstance specifies whether a more efficient
method of SAP allocation for LAG SAPs should be utilized.

This object may only be set to true, if both tLagPerFpIngQueuing and
tLagPerF…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.26
tLagLacpHoldTime
The value of tLagLacpHoldTime specifies the time that this system
waits before switching to a newly eligible sub-group while the
currently active sub-group is active.

In other words, if the system has swi…
decisecondsUnsigned32r/w
Constraints:
range: 4294967295-4294967295
range: 0-2000
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.27
tLagPerLinkHashWeighted
The value of tLagPerLinkHashWeighted specifies whether there is a
class and weight based balanced distribution of traffic egressing on
the objects configured on the LAG.

An 'inconsistentValue' error is re…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.29
tLagPerLinkHashWeightedRebalance
The value of tLagPerLinkHashWeightedRebalance specifies whether to
rebalance automatically when there is a class and weight based
balanced distribution of traffic egressing on the objects configured
on the LAG.
…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.30
tLagPortWeightSpeed
The value of tLagPortWeightSpeed specifies the speed corresponding to
a weight unit.

The value zero specifies that mixing ports with different speeds is
not allowed in this LAG.

For example…
gigabpsUnsigned32r/w
Constraints:
range: 10-10
range: 0-1
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.31
tLagWeightThreshold
The value of the object tLagWeightThreshold specifies a threshold for
the action specified by the object tLagWeightThresholdAction;

the value is a weight, and the unit depends on the value of the object
t…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.33
tLagWeightThresholdAction
The value of the object tLagWeightThresholdAction specifies the action
to take when the weight of the physical ports that are operational
(link up) is less than the value of tLagWeightThreshold.

When a ph…
Enumerationr/w
Enumerated Values:
1down
2dynamicCost
3staticCost
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.34
tLagMonitorOperGrpName
The value of tLagMonitorOperGrpName specifies the operational group of
which the status affects the status of this LAG.

If the value is not empty, it must correspond to a conceptual row in
the TIMETRA-SER…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.36
tLagLacpMuxControl
The value of tLagLacpMuxControl specifies the LACP MUX (multiplexer)
state machine variant.

The value 'coupled' specifies that transmit and receive directions are
activated together, while the value 'inde…
Enumerationr/w
Enumerated Values:
1coupled
2independent
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.37
tLagBfdDisableSoftResetExt
The value of tLagBfdDisableSoftResetExt specifies if the extension of
Bidirectional Forwarding Detection (BFD) timers during soft reset is
disabled.

While the value of tLagBfdDisableSoftResetExt is 'true'…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.38
tLagAccessBandwidth
The value of tLagAccessBandwidth specifies the administrative
bandwidth assigned to this lag.

The administrative bandwidth can be over or under booked using the
value of tLagAccessBookingFactor.
kilobpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.39
tLagAccessBookingFactor
The value of tLagAccessBookingFactor specifies the booking factor,
against the administrative bandwidth specified by tLagAccessBandwidth.
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.40
tLagAccessAvailableBW
The value of tLagAccessAvailableBW indicates the bandwidth that is
still free for booking on this lag.
kilobpsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.41
tLagAccessBookedBW
The value of tLagAccessBookedBW indicates the lag bandwidth that has
been booked.
kilobpsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.42
tLagPortThresholdStaticCost
The value of the object tLagPortThresholdStaticCost specifies the cost
of the LAG link when the number of operational (link up) physical
ports is less than tLagPortThreshold, and the value of the object
tLagPortThreshol…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.43
tLagWeightThresholdStaticCost
The value of the object tLagWeightThresholdStaticCost specifies the
cost of the LAG link when the weight of operational (link up) physical
ports is less than tLagWeightThreshold, and the value of the object
tLagWeightTh…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.44
tLagAccessBandwidthHigh
The value of tLagAccessBandwidthHigh specifies the higher 32 bits of
the bandwidth assigned to this lag.

The object tLagAccessBandwidth specifies the lower 32 bits.

The administrative bandw…
kilobpsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.45
tLagHashWeightThreshold
The value of the object tLagHashWeightThreshold specifies a threshold
for the action specified by the object tLagHashWeightThresholdAction;

The value of tLagHashWeightThreshold is compared to the sum of t…
Integer32r/w
Constraints:
range: 0-6400000
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.46
tLagHashWeightThresholdAction
The value of the object tLagHashWeightThresholdAction specifies the
action to take when the weight of the physical ports that are
operational (link up) is less than the value of
tLagHashWeightThreshold.

W…
Enumerationr/w
Enumerated Values:
1down
2dynamicCost
3staticCost
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.47
tLagHashWeightThresholdStaticCst
The value of the object tLagHashWeightThresholdStaticCst specifies the
cost of the LAG link when the weight of operational (link up) physical
ports is less than tLagHashWeightThreshold, and the value of the
object tLagH…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.48
tLagAdaptiveLb
The value of the object tLagAdaptiveLb specifies if the system applies
adaptive load balancing to the member ports of this LAG.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.49
tLagAdaptiveLbTolerance
The value of tLagAdaptiveLbTolerance specifies the allowed difference
between the highest member port load and the lowest. The value is only
relevant while tLagAdaptiveLb is equal to 'true'.
percentUnsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6527.3.1.2.15.2.1.50

tLagOperationTable

table
.1.3.6.1.4.1.6527.3.1.2.15.3 · 1 row entry · 12 columns
Open in standard view 
Operational information about each Link Aggregation Group.
tLagOperationEntry entry .1.3.6.1.4.1.6527.3.1.2.15.3.1
An entry (conceptual row) in the tLagOperationTable. Each entry
represents an active Link Aggregation Group.
Indexes
No indexes recorded
Column Syntax OID
tLagIfIndex
ifIndex for the Link Aggregation Group. This value is zero when
tLagRowStatus is not active(1).
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.1
tLagConfigLastChange
last change timestamp records when any object in tLagConfigTable was
set.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.2
tLagPortThresholdFalling
counts the number of linkDown or dynamicCost events for the Link
Aggregation Group caused by the number of physical ports being less
than or equal to tLagPortThreshold value.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.3
tLagPortThresholdRising
counts the number of linkUp or dynamicCost events for the Link
Aggregation Group caused by the number of physical ports being greater
than tLagPortThreshold value.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.4
tLagLACPPrimaryPort obsolete
tLagLACPPrimaryPort contains the primary port of the LACP. The
following two conditions have to be met for the port to become
eligible for becoming the primary port: a) Port has to be in either
link up or oper up. b) Th…
TIMETRA-TC-MIBTmnxPortID
Textual Convention: TIMETRA-TC-MIBTmnxPortID Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.5
tLagPortReasonDownFlags obsolete
The tLagPortReasonDownFlags indicates why a lag port may be in the
operationally 'down' state. The following reasons are detected
through this object:
unknown(0) - Unspecified (or unknown)
linklossFwd(…
Bits
Enumerated Values:
0unknown
1linklossFwd
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.6
tLagSelectedSubGroup
The value of tLagSelectedSubGroup indicates the currently selected
sub-group.

The value zero indicates that the value is not applicable.

The value minus one can appear in a multi-chassis LA…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.7
tLagCandidateSubGroup
The value of tLagCandidateSubGroup indicates the candidate sub-group.

The value zero indicates that the value is not applicable.

The value minus one can appear in a multi-chassis LAG config…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.8
tLagRemainingHoldTime
The value of tLagRemainingHoldTime indicates the time remaining before
this system would switch to the newly eligible sub-group.

The value zero indicates that the system would immediately switch
back.
…
decisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.9
tLagPortWeightUp
The value of tLagPortWeightUp indicates the weight of the physical
ports that are operational (link up).

The weight of each LAG member port is either configured or derived
from the port speed.
…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.10
tLagAdaptiveLbVariation
The value of tLagAdaptiveLbVariation indicates the actual difference
between the highest member port load and the lowest. The value is only
relevant while tLagAdaptiveLb is equal to 'true'.
percentUnsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.11
tLagAdaptiveLbChanged
The value of tLagAdaptiveLbChanged indicates the number of times a
load balancing change event tLagAdaptiveLoadbalancingChanged occurred
for this LAG.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.3.1.12

tLagMemberTable

table
.1.3.6.1.4.1.6527.3.1.2.15.5 · 1 row entry · 2 columns
Open in standard view 
The tLagMemberTable has an entry for each Port that is part of a LAG.
tLagMemberEntry entry .1.3.6.1.4.1.6527.3.1.2.15.5.1
Each row entry represents a particular port in a LAG. Entries are
automatically created when a Port is provisioned as part of a LAG,
i.e. when tmnxPortLagId from TIMETRA-PORT-MIB.mib is changed from its
default value of…
Indexes
tLagIndex TIMETRA-PORT-MIBtmnxPortPortID
Column Syntax OID
tLagMemberPortName
The value of tLagMemberPortName indicates the name of the port that is
a member of the LAG used to index into tLagMemberTable. This is a
read-only object that is the same as tmnxPortName from
TIMETRA-PORT-MIB.mib.
TIMETRA-TC-MIBTNamedItemOrEmpty
Textual Convention: TIMETRA-TC-MIBTNamedItemOrEmpty OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.15.5.1.1
tLagMemberPortIsPrimary
The value of tLagMemberPortIsPrimary indicates whether the port used
to index into tLagMemberTable is the primary port of the LAG used to
index into tLagMemberTable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.5.1.2

tLagPortTable

table
.1.3.6.1.4.1.6527.3.1.2.15.6 · 1 row entry · 6 columns
Open in standard view 
The tLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable
with 7x50 specific features.
tLagPortEntry entry .1.3.6.1.4.1.6527.3.1.2.15.6.1
A list of Link Aggregation Control configuration parameters for each
Aggregation Port on this device. The tLagPortTable extends the
IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
Indexes
No indexes recorded
Column Syntax OID
tLagPortSubgroup
The value of tLagPortSubgroup specifies the subgroup to which the port
in this LAG is assigned.
LAGSubgroupr/w
Textual Convention: LAGSubgroup Integer32
Type Constraints:
range: -2..-1
range: 1..8
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.1
tLagPortActiveStdby
The value of tLagPortActiveStdby indicates active standby state of
this port in the LAG.
Enumeration
Enumerated Values:
1active
2stand-by
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.2
tLagPortHashWeight
The value of tLagPortHashWeight specifies the hash weight of this port
within the LAG.

A value of zero means there is no weight configured, while a value of
minus one means the weight is derived from the …
Integer32r/w
Constraints:
range: -1-100000
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.3
tLagPortOperHashWeight
The value of tLagPortOperHashWeight indicates the operational hash
weight of this port within the LAG.
Integer32
Constraints:
range: 1-100000
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.4
tLagPortFlowShare
The value of tLagPortFlowShare indicates the ratio of the number of
traffic flows pre-assigned to this port and the sum of the number of
flows pre-assigned to each operational port of the LAG.

The value …
centipercentUnsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.5
tLagPortAdaptiveLbEgressRate
The value of tLagPortAdaptiveLbEgressRate indicates the egress traffic
rate on this LAG port when adaptive load balancing is enabled on the
LAG.

When adaptive load balancing is disabled on the LAG, the va…
kilobpsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.15.6.1.6

tLagLinkMapProfileTable

table
.1.3.6.1.4.1.6527.3.1.2.15.8 · 1 row entry · 6 columns
Open in standard view 
The tLagLinkMapProfileTable has an entry for each LAG link map
profile.
tLagLinkMapProfileEntry entry .1.3.6.1.4.1.6527.3.1.2.15.8.1
The tLagLinkMapProfileEntry contains the information about a
particular LAG link map profile.
Indexes
tLagIndex tLagLinkMapProfileId
Column Syntax OID
tLagLinkMapProfileId
The value of tLagLinkMapProfileId specifies a LAG link map profile
identifier.
TIMETRA-TC-MIBTmnxLinkMapProfileId
Textual Convention: TIMETRA-TC-MIBTmnxLinkMapProfileId Integer32
Type Constraints:
range: 1..64
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.1
tLagLinkMapProfileRowStatus
This value of the object tLagLinkMapProfileRowStatus specifies the
status of this row.

Entries are created and deleted using this object.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.2
tLagLinkMapProfileLastChanged
The value of tLagLinkMapProfileLastChanged indicates the sysUpTime at
the time of the last modification of this entry.

If no changes were made to the entry since the last re-initialization
of the local ne…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.3
tLagLinkMapProfileDescription
The value of tLagLinkMapProfileDescription specifies the user provided
description of this entry.
TIMETRA-TC-MIBTItemDescriptionr/w
Textual Convention: TIMETRA-TC-MIBTItemDescription OctetString
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.4
tLagLinkMapProfileFailureMode
The value of tLagLinkMapProfileFailureMode specifies the failure mode
operation of this entry.

When the value of tLagLinkMapProfileFailureMode is set to 'down', SAP
or interface associated with this LAG w…
Enumerationr/w
Enumerated Values:
1perLinkHash
2discard
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.5
tLagLinkMapProfileActiveLink
The value of tLagLinkMapProfileActiveLink indicates the active link
port for this entry.
TIMETRA-TC-MIBTmnxPortID
Textual Convention: TIMETRA-TC-MIBTmnxPortID Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.8.1.6

tLagLinkMapProfPortTable

table
.1.3.6.1.4.1.6527.3.1.2.15.10 · 1 row entry · 4 columns
Open in standard view 
The tLagLinkMapProfPortTable has an entry for each associated port of
lag link map profile.
tLagLinkMapProfPortEntry entry .1.3.6.1.4.1.6527.3.1.2.15.10.1
The tLagLinkMapProfPortEntry contains the information about a
particular port associated with the LAG link map profile.
Indexes
tLagIndex tLagLinkMapProfileId tLagLinkMapProfPortId
Column Syntax OID
tLagLinkMapProfPortId
The value of tLagLinkMapProfPortId specifies an associated port to the
LAG link map profile.
TIMETRA-TC-MIBTmnxPortID
Textual Convention: TIMETRA-TC-MIBTmnxPortID Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.10.1.1
tLagLinkMapProfPortRowStatus
This value of the object tLagLinkMapProfPortRowStatus specifies the
status of this row.

Entries are created and deleted using this object.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6527.3.1.2.15.10.1.2
tLagLinkMapProfPortLastChanged
The value of tLagLinkMapProfPortLastChanged indicates the sysUpTime at
the time of the last modification of this entry.

If no changes were made to the entry since the last re-initialization
of the local n…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.10.1.3
tLagLinkMapProfPortType
The value of tLagLinkMapProfPortType specifies the type of the
associated port for this entry.

The value of this object must be specified at the time of creation of
the entry.
Enumerationr/w
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.6527.3.1.2.15.10.1.4

tLagPerLinkHashWtPortClassTable

table
.1.3.6.1.4.1.6527.3.1.2.15.11 · 1 row entry · 4 columns
Open in standard view 
The tLagPerLinkHashWtPortClassTable maintains the number of users and
aggregate weight per class per port for weighted per-link-hash enabled
LAGs.
tLagPerLinkHashWtPortClassEntry entry .1.3.6.1.4.1.6527.3.1.2.15.11.1
The tLagPerLinkHashWtPortClassEntry contains the information about a
particular class on a specific active port of the lag.
Indexes
tLagIndex tLagPerLinkHashWtPort tLagPerLinkHashWtPortClassId
Column Syntax OID
tLagPerLinkHashWtPort
The value of tLagPerLinkHashWtPort indicates the port of the lag
with tLagPerLinkHashWeighted enabled.
TIMETRA-TC-MIBTmnxPortID
Textual Convention: TIMETRA-TC-MIBTmnxPortID Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.11.1.1
tLagPerLinkHashWtPortClassId
The value of tLagPerLinkHashWtPortClassId indicates the traffic class
for the port of the LAG.
TIMETRA-TC-MIBTmnxLagPerLinkHashClass
Textual Convention: TIMETRA-TC-MIBTmnxLagPerLinkHashClass Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.6527.3.1.2.15.11.1.2
tLagPerLinkHashWtPortClassUsers
The value of tLagPerLinkHashWtPortClassUsers indicates number of users
on the class for the port of the LAG.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.15.11.1.3
tLagPerLinkHashWtPortClassAggWt
This value of tLagPerLinkHashWtPortClassAggWt indicates aggregate
weight of all users on the class for the port of the LAG.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.15.11.1.4

tmnxLagActionTable

table
.1.3.6.1.4.1.6527.3.1.2.15.12 · 1 row entry · 3 columns
Open in standard view 
The tmnxLagActionTable allows actions on the Certificate-Authority
profiles.
tmnxLagActionEntry entry .1.3.6.1.4.1.6527.3.1.2.15.12.1
The tmnxLagActionEntry allows action on a specific
Certificate-Authority profile.
Indexes
tLagIndex
Column Syntax OID
tmnxLagActionType
The tmnxLagActionType specifies the action to be performed on the CA
profile.

The tmnxLagActionType and tmnxLagAction objects must be set together
for the specific action to be performed.
Enumerationr/w
Enumerated Values:
0none
1loadBalance
 .1.3.6.1.4.1.6527.3.1.2.15.12.1.1
tmnxLagAction
The value of tmnxLagAction specifies to perform action specified in
the tmnxLagActionType object.

The value of tmnxLagAction will always be returned as 'notApplicable'.

The tmnxLagActionTyp…
TIMETRA-TC-MIBTmnxActionTyper/w
Textual Convention: TIMETRA-TC-MIBTmnxActionType Enumeration
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.6527.3.1.2.15.12.1.2
tmnxLagActionClassId
The tmnxLagActionClassId specifies the per-link-hash class identifier
associated with requested action on the LAG.
TIMETRA-TC-MIBTmnxLagPerLinkHashClassOrNoner/w
Textual Convention: TIMETRA-TC-MIBTmnxLagPerLinkHashClassOrNone Integer32
Type Constraints:
range: 0..3
 .1.3.6.1.4.1.6527.3.1.2.15.12.1.3

tLagPortStatsLacpTable

table
.1.3.6.1.4.1.6527.3.1.2.15.13 · 1 row entry · 4 columns
Open in standard view 
The tLagPortStatsLacpTable contains detailed statistics for LAG ports.
tLagPortStatsLacpEntry entry .1.3.6.1.4.1.6527.3.1.2.15.13.1
A list of Link Aggregation Control statistics counters for each
Aggregation Port on this device. The tLagPortTable extends the
IEEE8023-LAG-MIB::dot3adAggPortTable with 7x50 specific features.
Indexes
No indexes recorded
Column Syntax OID
tLagPortStatsLacpTx
The value of tLagPortStatsLacpTx indicates the number of valid LACP
PDUs transmitted on this port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.13.1.1
tLagPortStatsLacpRx
The value of tLagPortStatsLacpRx indicates the number of valid LACP
PDUs received on this port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.13.1.2
tLagPortStatsLacpRxErrors
The value of tLagPortStatsLacpRxErrors indicates the number of invalid
LACP PDUs received on this port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.13.1.3
tLagPortStatsLacpRxIllegal
The value of tLagPortStatsLacpRxIllegal indicates the number of
illegal LACP PDUs received on this port
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.13.1.4

tmnxLagBfdFamTable

table
.1.3.6.1.4.1.6527.3.1.2.15.50.2 · 1 row entry · 13 columns
Open in standard view 
The tmnxLagBfdFamTable allows the configuration of LAG per-member
Bidirectional Forwarding Detection (BFD) for the IPv4 and IPv6 micro
BFD sessions.
tmnxLagBfdFamEntry entry .1.3.6.1.4.1.6527.3.1.2.15.50.2.1
Each conceptual row represents information for a particular LAG's
micro BFD sessions of a particular IP address family (IPv4 or IPv6).

Conceptual rows in this table are created and destroyed automatically
b…
Indexes
tLagIndex tmnxLagBfdFamAddressType
Column Syntax OID
tmnxLagBfdFamAddressType
The value of tmnxLagBfdFamAddressType specifies the IP address type of
this micro BFD session configuration.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.1
tmnxLagBfdFamLastCh
The value of tmnxLagBfdFamLastCh indicates the sysUpTime at the time
of the most recent management-initiated change to this table row.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.2
tmnxLagBfdFamAdminState
The value of tmnxLagBfdFamAdminState specifies the administrative
state of BFD for this IP address family on this LAG.
TIMETRA-TC-MIBTmnxEnabledDisabledr/w
Textual Convention: TIMETRA-TC-MIBTmnxEnabledDisabled Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.3
tmnxLagBfdFamAddrType
The value of tmnxLagBfdFamAddrType specifies the address type of
tmnxLagBfdFamAddr.

Any value other than 'unknown' must be equal to the value of
tmnxLagBfdFamAddressType.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.4
tmnxLagBfdFamAddr
The value of tmnxLagBfdFamAddr specifies the local IP address.
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
range: 0-0
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.5
tmnxLagBfdFamRemAddrType
The value of tmnxLagBfdFamRemAddrType specifies the address type of
tmnxLagBfdFamRemAddr.

Any value other than 'unknown' must be equal to the value of
tmnxLagBfdFamAddressType.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.6
tmnxLagBfdFamRemAddr
The value of tmnxLagBfdFamRemAddr specifies the remote IP address.
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
range: 0-0
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.7
tmnxLagBfdFamTransmitInterval
The value of tmnxLagBfdFamTransmitInterval specifies the transmit
timer for the BFD packets.
millisecondsUnsigned32r/w
Constraints:
range: 10-100000
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.8
tmnxLagBfdFamReceiveInterval
The value of tmnxLagBfdFamReceiveInterval specifies the receive timers
for the BFD packets.
millisecondsUnsigned32r/w
Constraints:
range: 10-100000
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.9
tmnxLagBfdFamMultiplier
The value of tmnxLagBfdFamMultiplier specifies the number of
consecutive BFD messages that must be missed from the peer before the
BFD session state is changed to down.
Unsigned32r/w
Constraints:
range: 3-20
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.10
tmnxLagBfdFamMaxSetupTime
The value of tmnxLagBfdFamMaxSetupTime specifies the maximum time the
system will behave as if the micro-BFD session were 'Up', regardless
of the actual state of the micro-BFD session being established.

W…
millisecondsInteger32r/w
Constraints:
range: -1-60000
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.11
tmnxLagBfdFamMaxAdminDownTime
The value of tmnxLagBfdFamMaxAdminDownTime specifies the maximum time
the system will continue to behave as if the micro-BFD session was
'Up', after the remote system has signalled it as administratively
down by means o…
secondsInteger32r/w
Constraints:
range: -1-3600
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.12
tmnxLagBfdFamBfdOnDistributing
The value of tmnxLagBfdFamBfdOnDistributing specifies if BFD is
started only on links in LACP 'distributing' state.

While the value of tmnxLagBfdFamBfdOnDistributing is equal to 'true',
BFD is started onl…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6527.3.1.2.15.50.2.1.13

tmnxLagBfdMemTable

table
.1.3.6.1.4.1.6527.3.1.2.15.50.3 · 1 row entry · 3 columns
Open in standard view 
The tmnxLagBfdMemTable extends the tLagMemberTable with BFD specific
features.
          
Conceptual rows are automatically created when a port is provisioned
as part of a LAG.
tmnxLagBfdMemEntry entry .1.3.6.1.4.1.6527.3.1.2.15.50.3.1
Each row entry represents BFD-specific information about a particular
port in a LAG.
Indexes
No indexes recorded
Column Syntax OID
tmnxLagBfdMemState
The value of tmnxLagBfdMemState indicates the state of the micro-BFD
session of this port in this LAG.

Possible states are:
idle : there is no BFD session;
failed : the creation of the BFD ses…
Enumeration
Enumerated Values:
0idle
1failed
2failedFwd
3waiting
4waitingFwd
5up
6down
 .1.3.6.1.4.1.6527.3.1.2.15.50.3.1.1
tmnxLagBfdMemSetupTimeLeft
The value of tmnxLagBfdMemSetupTimeLeft indicates the setup time left.

The value zero indicates that the setup timer is not running.

Refer to the description of the object tmnxLagBfdFamMaxS…
millisecondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.50.3.1.2
tmnxLagBfdMemAdminDownLeft
The value of tmnxLagBfdMemAdminDownLeft indicates the time left before
this system will react upon the 'AdminDown' State indication.

The value zero indicates that the timer is not running.

…
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.15.50.3.1.3