tLagPerLinkHash
TIMETRA-LAG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.15.2.1.23
Object
The value of tLagPerLinkHash specifies whether SAP or interface associated with this LAG will send traffic over a single link of a LAG auto-rebalancing as links are added and removed from this LAG.
Context
- MIB
- TIMETRA-LAG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.15.2.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tLagConfigEntry
- Table
- tLagConfigTable
- Siblings
- 46
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tLagIndex the number of the Link Aggregation Group. | column | TIMETRA-TC-MIBLAGInterfaceNumber | .1.3.6.1.4.1.6527.3.1.2.15.2.1.1 |
| tLagLACPAdminKeyAutogen tLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key
in the dot3adAggActorAdminKey object was auto generated.
tLagLACPAdminKeyAutogen is set to 'false', if the l… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.10 |
| tLagLACPTransmitInterval tLagLACPTransmitInterval configures the timer interval for periodic
transmission of LACP packets. If set to 'slow', LACP packets are
transmitted every 30 seconds. If set to 'fast'… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.11 |
| tLagAccessAdaptQos The value of tLagAccessAdaptQos specifies how the LAG SAP queue and
virtual scheduler buffering and rate parameters are adapted over
multiple active MDAs.
link (1) - The… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.12 |
| tLagLACPXmitStdby The value of tLagLACPXmitStdby specifies whether or not LACP messages
are transmitted on standby-links. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.13 |
| tLagLACPSelCrit The value of tLagLACPSelCrit specifies which selection criteria should
be used to select the active sub-group. | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.14 |
| tLagLACPSelCritSlaveToPartner The value of tLagLACPSelCritSlaveToPartner specifies together with
tLagLACPSelCrit selection criteria should be used to select the
active sub-group.
The term 'eligible member' r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.15 |
| tLagLACPNbrOfSubGroups The value of tLagLACPNbrOfSubGroups indicates the number of subgroups
configured in this LAG. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.16 |
| tLagholdTimeDown The value of tLagholdTimeDown specifies the timer in 0.1 second
units which controls the delay between detecting that a LAG is down
(all active ports are down) and reporting it t… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.17 |
| tLagPortType The value of tLagPortType specifies the type of ports allowed in this
LAG.
A value of 'standard (1)' allows all non-HSMDA and non-HS type
ports to be added to this … | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.18 |
| tLagPerFpIngQueuing The value of tLagPerFpIngQueuing specifies whether a more efficient
method of queue allocation for LAG SAPs should be utilized.
An 'inconsistentValue' error is retu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.19 |
| tLagRowStatus RowStatus for this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6527.3.1.2.15.2.1.2 |
| tLagSystemId The value of the object tLagSystemId specifies A 6-octet MAC address
used as a unique identifier for the System that contains this
Aggregator.
If set to zero, the d… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6527.3.1.2.15.2.1.20 |
| tLagSystemPriority The value of the object tLagSystemPriority specifies a 2-octet value
indicating the priority value associated with the Actor's System ID.
If set to -1, the priority… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.21 |
| tLagStandbySignaling The value of tLagStandbySignaling specifies how the state of a member
port is signalled to the remote side when the tLagPortActiveStdby
corresponding to this member port has the v… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.22 |
| tLagPerFpEgrQueuing The value of tLagPerFpEgrQueuing specifies whether a more efficient
method of queue allocation for LAG SAPs should be utilized.
An 'inconsistentValue' error is retu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.24 |
| tLagIncludeEgrHashCfg The value of tLagIncludeEgrHashCfg specifies whether explicitly
configured hashing should factor into the egress buffering and rate
distribution (tLagAccessAdaptQos).
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.25 |
| tLagPerFpSapInstance The value of tLagPerFpSapInstance specifies whether a more efficient
method of SAP allocation for LAG SAPs should be utilized.
This object may only be set to true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.26 |
| tLagLacpHoldTime The value of tLagLacpHoldTime specifies the time that this system
waits before switching to a newly eligible sub-group while the
currently active sub-group is active.
… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.27 |
| tLagPerLinkHashWeighted The value of tLagPerLinkHashWeighted specifies whether there is a
class and weight based balanced distribution of traffic egressing on
the objects configured on the LAG.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.29 |
| tLagPortThreshold tLagPortThreshold is a threshold for tLagPortThresholdAction.
When a physical port link state changes and the number of operational
physical ports is less than or e… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.3 |
| tLagPerLinkHashWeightedRebalance The value of tLagPerLinkHashWeightedRebalance specifies whether to
rebalance automatically when there is a class and weight based
balanced distribution of traffic egressing on the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.30 |
| tLagPortWeightSpeed The value of tLagPortWeightSpeed specifies the speed corresponding to
a weight unit.
The value zero specifies that mixing ports with different speeds is
not allowed… | column | gigabps Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.31 |
| tLagWeightThreshold The value of the object tLagWeightThreshold specifies a threshold for
the action specified by the object tLagWeightThresholdAction;
the value is a weight, and the u… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.33 |
| tLagWeightThresholdAction The value of the object tLagWeightThresholdAction specifies the action
to take when the weight of the physical ports that are operational
(link up) is less than the value of tLagW… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.34 |
| tLagMonitorOperGrpName The value of tLagMonitorOperGrpName specifies the operational group of
which the status affects the status of this LAG.
If the value is not empty, it must correspon… | column | TIMETRA-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.6527.3.1.2.15.2.1.36 |
| tLagLacpMuxControl The value of tLagLacpMuxControl specifies the LACP MUX (multiplexer)
state machine variant.
The value 'coupled' specifies that transmit and receive directions are
a… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.37 |
| tLagBfdDisableSoftResetExt The value of tLagBfdDisableSoftResetExt specifies if the extension of
Bidirectional Forwarding Detection (BFD) timers during soft reset is
disabled.
While the value… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.38 |
| tLagAccessBandwidth The value of tLagAccessBandwidth specifies the administrative
bandwidth assigned to this lag.
The administrative bandwidth can be over or under booked using the
val… | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.39 |
| tLagPortThresholdAction Port Threshold Action is action to take when the number of operational
(link up) physical ports is less than tLagPortThreshold.
When a physical port ifOperStatus ch… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.4 |
| tLagAccessBookingFactor The value of tLagAccessBookingFactor specifies the booking factor,
against the administrative bandwidth specified by tLagAccessBandwidth. | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.40 |
| tLagAccessAvailableBW The value of tLagAccessAvailableBW indicates the bandwidth that is
still free for booking on this lag. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.41 |
| tLagAccessBookedBW The value of tLagAccessBookedBW indicates the lag bandwidth that has
been booked. | column | kilobps SNMPv2-SMICounter64 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.42 |
| tLagPortThresholdStaticCost The value of the object tLagPortThresholdStaticCost specifies the cost
of the LAG link when the number of operational (link up) physical
ports is less than tLagPortThreshold, and … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.43 |
| tLagWeightThresholdStaticCost The value of the object tLagWeightThresholdStaticCost specifies the
cost of the LAG link when the weight of operational (link up) physical
ports is less than tLagWeightThreshold, … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.44 |
| tLagAccessBandwidthHigh The value of tLagAccessBandwidthHigh specifies the higher 32 bits of
the bandwidth assigned to this lag.
The object tLagAccessBandwidth specifies the lower 32 bits.… | column | kilobps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.45 |
| tLagHashWeightThreshold The value of the object tLagHashWeightThreshold specifies a threshold
for the action specified by the object tLagHashWeightThresholdAction;
The value of tLagHashWei… | column | Integer32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.46 |
| tLagHashWeightThresholdAction The value of the object tLagHashWeightThresholdAction specifies the
action to take when the weight of the physical ports that are
operational (link up) is less than the value of
t… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.47 |
| tLagHashWeightThresholdStaticCst The value of the object tLagHashWeightThresholdStaticCst specifies the
cost of the LAG link when the weight of operational (link up) physical
ports is less than tLagHashWeightThre… | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.48 |
| tLagAdaptiveLb The value of the object tLagAdaptiveLb specifies if the system applies
adaptive load balancing to the member ports of this LAG. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.49 |
| tLagEnableMarkerGenerator enables (true(1)) or disables (false(2)) the Marker Generator
protocol. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.5 |
| tLagAdaptiveLbTolerance The value of tLagAdaptiveLbTolerance specifies the allowed difference
between the highest member port load and the lowest. The value is only
relevant while tLagAdaptiveLb is equal… | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.2.1.50 |
| tLagEnableLACP enables (true(1)) or disables (false(2)) the Link Aggregation Control
Protocol (LACP).
The value of tLagEnableLACP can only be set to 'true(1)' when
tLagStandbySign… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.6 |
| tLagDescription Description text for the Link Aggregation Group port. | column | OctetString | .1.3.6.1.4.1.6527.3.1.2.15.2.1.7 |
| tLagDynamicCosting When dynamic cost and OSPF autocost are both configured then costing
is applied based on the total number of links configured and the cost
is advertised inversely proportional to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6527.3.1.2.15.2.1.8 |
| tLagLACPMode tLagLACPMode represents the mode in which LACP will operate. If the
value is set to 'passive', LACP places all member ports of a lag into
a passive negotiating state. When this is… | column | Enumeration | .1.3.6.1.4.1.6527.3.1.2.15.2.1.9 |