tLagLACPPrimaryPort
TIMETRA-LAG-MIB ·
.1.3.6.1.4.1.6527.3.1.2.15.3.1.5
Object
tLagLACPPrimaryPort contains the primary port of the LACP. The
following two conditions have to be met for the port to become
eligible for becoming the primary port: a) Port has to be in either
link up or oper up. b) The port must have received at least one LACP
PDU.
Once the above two conditions have been met, port with a highest
priority is chosen as the primary port. If there is a tie, the
smallest TmnxPortID will be the primary port.
Context
- MIB
- TIMETRA-LAG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.2.15.3.1.5- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- tLagOperationEntry
- Table
- tLagOperationTable
- Siblings
- 11
Syntax
TIMETRA-TC-MIBTmnxPortID
- Source
- TIMETRA-TC-MIBTmnxPortID
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tLagIfIndex ifIndex for the Link Aggregation Group. This value is zero when
tLagRowStatus is not active(1). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6527.3.1.2.15.3.1.1 |
| tLagPortWeightUp The value of tLagPortWeightUp indicates the weight of the physical
ports that are operational (link up).
The weight of each LAG member port is either configured or … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.10 |
| tLagAdaptiveLbVariation The value of tLagAdaptiveLbVariation indicates the actual difference
between the highest member port load and the lowest. The value is only
relevant while tLagAdaptiveLb is equal … | column | percent Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.11 |
| tLagAdaptiveLbChanged The value of tLagAdaptiveLbChanged indicates the number of times a
load balancing change event tLagAdaptiveLoadbalancingChanged occurred
for this LAG. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.12 |
| tLagConfigLastChange last change timestamp records when any object in tLagConfigTable was
set. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6527.3.1.2.15.3.1.2 |
| tLagPortThresholdFalling counts the number of linkDown or dynamicCost events for the Link
Aggregation Group caused by the number of physical ports being less
than or equal to tLagPortThreshold value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.3 |
| tLagPortThresholdRising counts the number of linkUp or dynamicCost events for the Link
Aggregation Group caused by the number of physical ports being greater
than tLagPortThreshold value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.4 |
| tLagPortReasonDownFlags obsolete The tLagPortReasonDownFlags indicates why a lag port may be in the
operationally 'down' state. The following reasons are detected
through this object:
unknown(0) - Unsp… | column | Bits | .1.3.6.1.4.1.6527.3.1.2.15.3.1.6 |
| tLagSelectedSubGroup The value of tLagSelectedSubGroup indicates the currently selected
sub-group.
The value zero indicates that the value is not applicable.
The value mi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.7 |
| tLagCandidateSubGroup The value of tLagCandidateSubGroup indicates the candidate sub-group.
The value zero indicates that the value is not applicable.
The value minus one … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.8 |
| tLagRemainingHoldTime The value of tLagRemainingHoldTime indicates the time remaining before
this system would switch to the newly eligible sub-group.
The value zero indicates that the s… | column | deciseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.15.3.1.9 |