StorageManagement-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
403

controllerTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.1 · 1 row entry · 75 columns
Open in standard view 
A table of managed RAID controllers. The number of entries
is related to number of RAID controllers discovered in the
system.
Note: The properties in this table may not be applicable to all entries.
controllerEntry entry .1.3.6.1.4.1.674.10893.1.20.130.1.1
An entry in the table of RAID controllers. A row in this table cannot
be created or deleted by SNMP operations on columns of the table.
Indexes
controllerNumber
Column Syntax OID
controllerNumber mandatory
Instance number of this controller entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.1
controllerName mandatory
The name of the controller in this subsystem as represented in Storage Management.
Includes the controller type and instance.
For example: Perc3/QC 1.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.2
controllerVendor mandatory
The controller's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.3
controllerType mandatory
The type of this controller:
1: SCSI
2: PV660F
3: PV662F
4: IDE (Integrated/Intelligent Drive Electronics)
5: SATA (Serial Advanced Technology Attachment)
6: SAS (Serial Attached SCSI)
9: PCIe SSD
Enumeration
Enumerated Values:
1scsi
2pv660F
3pv662F
4ide
5sata
6sas
9pciessd
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.4
controllerState mandatory
The current condition of the controller's subsystem
(which includes any devices connected to it.)
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
6degraded
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.5
controllerSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.6
controllerRebuildRateInPercent mandatory
The percent of the compute cycles dedicated to rebuilding
failed array disks.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.7
controllerFWVersion mandatory
The controller's current firmware version.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.8
controllerCacheSizeInMB mandatory
The controller's current amount of cache memory in megabytes.
If this size is 0, it is less than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.9
controllerCacheSizeInBytes mandatory
The controller's current amount of cache memory that is less than a megabyte. This combined with the
controllerCacheSizeInMB will be the total amount of memory.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.10
controllerPhysicalDeviceCount mandatory
Number of physical devices on the controller channel including both disks and the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.11
controllerLogicalDeviceCount mandatory
Number of virtual disks on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.12
controllerPartnerStatus obsolete
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.13
controllerHostPortCount obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.14
controllerMemorySizeInMB mandatory
Size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.15
controllerMemorySizeInBytes mandatory
Size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB
will be the total size of the memory. This attribute is only supported on Adaptec controllers.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.16
controllerDriveChannelCount obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.17
controllerFaultTolerant mandatory
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Enumeration
Enumerated Values:
1yes
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.18
controllerC0Port0WWN obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.19
controllerC0Port0Name obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.20
controllerC0Port0ID obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.21
controllerC0Target obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.22
controllerC0Channel obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.23
controllerC0OSController obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.24
controllerC0BatteryState obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Enumeration
Enumerated Values:
1ok
2failed
7reconditioning
9high
10low
12charging
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.25
controllerC1Port0WWN obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.26
controllerC1Port0Name obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.27
controllerC1Port0ID obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.28
controllerC1Target obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.29
controllerC1Channel obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.30
controllerC1OSController obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.31
controllerC1BatteryState obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Enumeration
Enumerated Values:
1ok
2failed
7reconditioning
9high
10low
12charging
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.32
controllerNodeWWN obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.33
controllerC0Port1WWN obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.34
controllerC1Port1WWN obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.35
controllerBatteryChargeCount obsolete
This entry is obsolete.
Fibre channel is not supported in Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.36
controllerRollUpStatus mandatory
Severity of the controller state.
This is the combined status of the controller and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.37
controllerComponentStatus mandatory
The status of the controller itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.38
controllerNexusID mandatory
Durable unique ID for this controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.39
controllerAlarmState mandatory
State, or setting for the controller's alarm.
Possible values:
1: Enabled
2: Disabled
3: Not Applicable
Enumeration
Enumerated Values:
1enabled
2disabled
3not-applicable
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.40
controllerDriverVersion mandatory
Currently installed driver version for this controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.41
controllerPCISlot mandatory
The PCI slot number or embedded number for controllers on the motherboard.
For Modular or NGM controllers, the PCI Slot Designation or Embedded is displayed.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.42
controllerClusterMode mandatory
Identifies if the controller is in cluster mode.
Possible values:
1 : Enabled
2 : Disabled
3 : Active (enabled and active)
99: Not Applicable
Enumeration
Enumerated Values:
1enabled
2disabled
3active
99notApplicable
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.43
controllerMinFWVersion mandatory
The minimum firmware version for Storage Management to support the controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.44
controllerMinDriverVersion mandatory
The minimum driver version for Storage Management to support the controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.45
controllerSCSIInitiatorID mandatory
The SCSI ID of the initiator.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.46
controllerChannelCount mandatory
Number of channels on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.47
controllerReconstructRate mandatory
The rate for reconstruct on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.48
controllerPatrolReadRate mandatory
The rate for patrol read on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.49
controllerBGIRate mandatory
The rate for background initialization on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.50
controllerCheckConsistencyRate mandatory
The rate for check consistency on the controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.51
controllerPatrolReadMode mandatory
Identifies the patrol read mode.
Possible values:
1: Automatic (enabled)
2: Manual (enabled)
3: Disabled
Enumeration
Enumerated Values:
1automatic
2manual
3disabled
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.52
controllerPatrolReadState mandatory
The state of the patrol read.
1: Stopped - not running
2: Ready - ready to start
4: Active - is running
8: Aborted - has aborted
Enumeration
Enumerated Values:
1stopped
2ready
4active
8aborted
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.53
controllerPatrolReadIterations mandatory
The number of times Patrol Read has been run on this controller.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.54
controllerStorportDriverVersion mandatory
Provide current Windows OS storport driver version. Not applicable for Linux.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.55
controllerMinRequiredStorportVer mandatory
Provides minimum required storport driver version for Windows OS only.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.56
controllerEncryptionCapable mandatory
Indicates Encryption capability of the controller.
Value: 1 - Capable, 99 - NotApplicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.57
controllerEncryptionKeyPresent mandatory
Indicates presence of Encryption Key for the controller.
Value: 1 - Yes, 0 - No, 99 - NotApplicable
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.58
controllerPersistentHotSpare mandatory
Indicates Persistent Hot Spare capability of the controller
Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.59
controllerSpinDownUnconfiguredDrives mandatory
Indicates controller capability to put unconfigured drives in power save mode.
Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.60
controllerSpinDownHotSpareDrives mandatory
Indicates controller capability to put hot spare drives in power save mode.
Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined / Not applicable
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.61
controllerSpinDownTimeInterval mandatory
Shows the duration in minutes after which, the unconfigured or hot spare drives will be spun down to power save mode.
Value: 30 to 1440
Note: A value of 9999 indicates feature not available.
Integer32r/w
Constraints:
range: 30-1440
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.62
controllerEncryptionMode mandatory
Indicates the current encryption mode of the controller.
Value: 0 - No Encryption, 1 - Local Key Management (LKM), 2 - Secure Enterprise Key Management (SEKM), 99 - Not Applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.63
controllerCacheCade mandatory
Indicates if the controller is CacheCade capable or not.
Value: 1 - Capable, 0 - Not Capable, 99 - Undetermined
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.64
controllerSpinDownConfiguredDrives mandatory
Indicates controller capability to spin down configured physical disks.
Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.65
controllerAutomaticPowerSaving mandatory
Indicates controller capability for automatic power saving.
Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.66
controllerConfiguredDrivesSpinUpTime mandatory
Indicates configured drives spin up start time.
Value: 1:00 AM to 12:59 PM, 9999 - Undetermined
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.67
controllerConfiguredDrivesSpinUpTimeInterval mandatory
Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up.
Value: 1 .. 24, 9999 - Undetermin…
Integer32
Constraints:
range: 30-1440
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.68
controllerPreservedCache mandatory
Indicates if preserved cache is present on the controller.
Values: 1- Yes, 0 - No, 99 - Not available / Not applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.69
controllerPIEnable mandatory
Indicates if T10 PI is enabled on a controller.
Value can be either 0 (T10 PI disabled) or 1 (T10 PI enabled).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.70
controllerCurrentMode mandatory
Shows the current controller mode.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.71
frontChassisSlot mandatory
Shows the physical slot on the chassis for stash .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.72
controllerInstance mandatory
Shows the current instance of the controller for stash .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.73
controllerNonRAIDdiskCachePolicy mandatory
Displays the current disk write cache policy for Non-RAID disks.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.74
controllerAutoconfigureBehavior mandatory
Displays the current auto configure behavior mode on controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.1.1.75

channelTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.2 · 1 row entry · 11 columns
Open in standard view 
A table of controller channels. The number of entries is 
related to the number of channels supported by a RAID 
controller. Perc2 RAID controller supports a max of 4 
channels per controller. The maximum number of entries is 
implementation dependent.
Note: The properties in this table may not be applicable to all entries.
channelEntry entry .1.3.6.1.4.1.674.10893.1.20.130.2.1
An entry in the channel table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
channelNumber
Column Syntax OID
channelNumber mandatory
Instance number of this channel entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.1
channelName mandatory
The name of the channel as represented in Storage Management.
The name will include the word channel and the instance.
For example: Channel 1
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.2
channelState mandatory
The current condition of the channel.
Possible states:
0: Unknown
1: Ready - The I/O has resumed.
2: Failed
3: Online
4: Offline - The I/O has paused.
6: Degraded
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
6degraded
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.3
channelSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.4
channelTermination mandatory
The type of SCSI termination on this channel.
Termination is required for proper operation of this channel.

1: Wide Termination (16 bit)
2: Narrow Termination (8 bit)
3: Not Terminated
Enumeration
Enumerated Values:
1wide
2narrow
3notTerminated
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.5
channelSCSIID mandatory
The SCSI ID of the controller to which the channel belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.6
channelRollUpStatus mandatory
Severity of the channel state.
This is the combined status of the channel and its
components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.7
channelComponentStatus mandatory
The status of the channel itself with out without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.8
channelNexusID mandatory
Durable unique ID for this channel.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.9
channelDataRate mandatory
The data rate (SCSI speed) of the channel. Example: Ultra 320M SCSI
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.10
channelBusType mandatory
The bus type of the channel.
Possible values:
1: SCSI
2: IDE
3: Fibre Channel
4: SSA
6: USB
7: SATA
8: SAS
9: PCIe
Enumeration
Enumerated Values:
1scsi
2ide
3fibreChannel
4ssa
6usb
7sata
8sas
9pcie
 .1.3.6.1.4.1.674.10893.1.20.130.2.1.11

enclosureTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.3 · 1 row entry · 34 columns
Open in standard view 
A table of managed Enclosures. The number of entries is 
related to number of enclosures discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
enclosureEntry entry .1.3.6.1.4.1.674.10893.1.20.130.3.1
An entry in the Enclosure table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
enclosureNumber
Column Syntax OID
enclosureNumber mandatory
Instance number of the enclosure entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.1
enclosureName mandatory
The enclosure's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.2
enclosureVendor mandatory
The enclosure's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.3
enclosureState mandatory
The current condition of the enclosure
(which includes any devices connected to it.)
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
6degraded
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.4
enclosureSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.5
enclosureID mandatory
Represents unique id for an enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.6
enclosureProcessorVersion obsolete
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.7
enclosureServiceTag mandatory
Enclosure identification used when consulting customer support.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.8
enclosureAssetTag mandatory
User definable asset tag for the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.9
enclosureAssetName mandatory
User definable asset name of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.10
enclosureSplitBusPartNumber mandatory
The enclosure's split bus part number.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.11
enclosureProductID mandatory
The enclosure's product identification. This also corresponds to the enclosure type.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.12
enclosureKernelVersion obsolete
This entry is obsolete for Storage Management.
Refer to enclosureFirmwareVersion for the firmware version of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.13
enclosureESM1PartNumber obsolete
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.14
enclosureESM2PartNumber obsolete
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.15
enclosureType mandatory
The type of this enclosure.
Possible values:
1: Internal
2: Dell PV200S (PV201S)
3: Dell PV210S (PV211S)
4: Dell PV220S (PV221S)
5: Dell PV660F
6: Dell PV224F
7: Dell PV660F / PV224F
8: Dell MD1000
9: Dell MD1120
11: De…
Enumeration
Enumerated Values:
1internal
2dELLPV200SPV201S
3dELLPV210SPV211S
4dELLPV220SPV221S
5dELLPV660F
6dELLPV224F
7dELLPV660F224F
8md1000
9md1120
10md1200
11md1220
12md1400
13md1420
14mx5016s
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.16
enclosureProcessor2Version mandatory
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.17
enclosureConfig mandatory
The current configuration of the enclosure's backplane.
Possible values:
1: Joined
2: Split Bus
3: Clustered
4: Unified
Enumeration
Enumerated Values:
1joined
2splitBus
3clustered
4unified
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.18
enclosureChannelNumber mandatory
The channel number, or bus, to which the enclosure is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.19
enclosureAlarm mandatory
The current status of the enclosure's alarm (PV220S, and PV221S only.)
Possible values:
1: Disabled
2: Enabled
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.20
enclosureBackplanePartNumber mandatory
The part number of the enclosure's backplane.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.21
enclosureSCSIID mandatory
The SCSI ID of the controller to which this enclosure is attached.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.22
enclosureRollUpStatus mandatory
Severity of the enclosure state.
This is the combined status of the enclosure and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.23
enclosureComponentStatus mandatory
The status of the enclosure itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.24
enclosureNexusID mandatory
Durable unique ID for this enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.25
enclosureFirmwareVersion mandatory
The firmware version of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.26
enclosureSCSIRate mandatory
Actual SCSI rate in the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.27
enclosurePartNumber mandatory
The part number of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.28
enclosureSerialNumber mandatory
Serial number of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.29
enclosureSASAddress mandatory
The specified SAS address if this is a SAS enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.30
enclosureOccupiedSlotCount mandatory
Shows the number of physical disk slots occupied in a storage enclosure.
Note: A value of 9999 indicates feature not available.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.31
enclosureTotalSlots mandatory
Shows the total number of physical slots in a storage enclosure; it includes total count of occupied and empty slots.
Note: A value of 9999 indicates feature not available.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.32
enclosureEmptySlotCount mandatory
Shows the number of empty physical disk slots in a storage enclosure.
Note: A value of 9999 indicates feature not available.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.33
enclosureExpressServiceCode mandatory
Express Service Code (ESC) is base10 converted numerical value of service tag.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.3.1.34

arrayDiskTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.4 · 1 row entry · 61 columns
Open in standard view 
A table of managed Array Disks. The number of entries is 
related to number of Array Disks discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
arrayDiskEntry entry .1.3.6.1.4.1.674.10893.1.20.130.4.1
An entry in the Array Disk table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
arrayDiskNumber
Column Syntax OID
arrayDiskNumber mandatory
Instance number of this array disk entry.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.1
arrayDiskName mandatory
The name of the array disk as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.2
arrayDiskVendor mandatory
The array disk's manufacturer's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.3
arrayDiskState mandatory
The current condition of the array disk.
Possible states:
0: Unknown
1: Ready - Available for use, but no RAID configuration has been assigned.
2: Failed - Not operational.
3: Online - Operational. RAID configurati…
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
6degraded
7recovering
11removed
13non-raid
14notReady
15resynching
22replacing
23spinningDown
24rebuild
25noMedia
26formatting
27unusable
28diagnostics
34predictiveFailure
35initializing
39foreign
40clear
41unsupported
53incompatible
56readOnly
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.4
arrayDiskSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.5
arrayDiskProductID mandatory
The model number of the array disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.6
arrayDiskSerialNo mandatory
The array disk's unique identification number from the manufacturer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.7
arrayDiskRevision mandatory
The firmware version of the array disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.8
arrayDiskEnclosureID mandatory
The SCSI ID of the enclosure processor to which this array disk belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.9
arrayDiskChannel mandatory
The bus to which this array disk is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.10
arrayDiskLengthInMB mandatory
The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.11
arrayDiskLengthInBytes mandatory
The size of the array disk in bytes that is less than
a megabyte. This size plus the arrayDiskLengthInMB is
the total size of the array disk.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.12
arrayDiskLargestContiguousFreeSpaceInMB mandatory
The size in megabytes of the largest contiguous free space
on the array disk. If this size is 0, it is less than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.13
arrayDiskLargestContiguousFreeSpaceInBytes mandatory
The size of the largest contiguous free space on this
array disk in bytes that is less than a megabyte.
This size plus the arrayDiskLargestContiguousFreeSpaceInMB
is the total size of the largest contiguous free space…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.14
arrayDiskTargetID mandatory
The SCSI target ID which this array disk is assigned.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.15
arrayDiskLunID mandatory
The array disk's logical unit number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.16
arrayDiskUsedSpaceInMB mandatory
The amount in megabytes of the used space on the array
disk. If this size is 0, it is smaller than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.17
arrayDiskUsedSpaceInBytes mandatory
The size in bytes of the used space on the array disk
that is smaller than a megabyte. This size plus the
arrayDiskUsedSpaceInMB is the total amount of used space
on the array disk.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.18
arrayDiskFreeSpaceInMB mandatory
The amount in megabytes of the free space on the array
disk. If this size is 0, it is smaller than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.19
arrayDiskFreeSpaceInBytes mandatory
The size in bytes of the free space on the array disk
that is smaller than a megabyte. This size plus the
arrayDiskFreeSpaceInMB is the total amount of free space
on the array disk.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.20
arrayDiskBusType mandatory
The bus type of the array disk.
Possible values:
1: SCSI
2: IDE
3: Fibre Channel
4: SSA
6: USB
7: SATA
8: SAS
9: PCIe
Enumeration
Enumerated Values:
1scsi
2ide
3fibre
4ssa
6usb
7sata
8sas
9pcie
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.21
arrayDiskSpareState mandatory
The status of the array disk as a spare.
Possible states:
1 : disk is a member of a virtual disk
2 : disk is a member of a disk group
3 : disk is a global hot spare
4 : disk is a dedicated hot spare
5 : not a spare
99: …
Enumeration
Enumerated Values:
1memberVD
2memberDG
3globalHotSpare
4dedicatedHotSpare
5notASpare
99notApplicable
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.22
arrayDiskRollUpStatus mandatory
Severity of the array disk state.
This is the combined status of the array disk and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.23
arrayDiskComponentStatus mandatory
The status of the array disk itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.24
arrayDiskDeviceName mandatory
The operating system device name for this disk. This property is only applicable to array disks attached to a RAID controller.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.25
arrayDiskNexusID mandatory
Durable unique ID for this array disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.26
arrayDiskPartNumber mandatory
The part number of the disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.27
arrayDiskSASAddress mandatory
The specified SAS address if this is a SAS disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.28
arrayDiskNegotiatedSpeed mandatory
The speed at which the drive is actually running in MPS (megabytes per second).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.29
arrayDiskCapableSpeed mandatory
The maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.30
arrayDiskSmartAlertIndication mandatory
Indicated whether the disk has received a predictive failure.
Possible values:
1: No - disk has not received a predictive failure alert
2: Yes - disk has received a predictive failure alert
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.31
arrayDiskManufactureDay mandatory
The day of the week (1=Sunday thru 7=Saturday) on which this disk was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.32
arrayDiskManufactureWeek mandatory
The week (1 thru 53) in which this disk was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.33
arrayDiskManufactureYear mandatory
The four digit year in which this disk was manufactured.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.34
arrayDiskMediaType mandatory
The Media type of the array disk.
Possible Values:
1:unknown
2:hdd
3:ssd
Enumeration
Enumerated Values:
1unknown
2hdd
3ssd
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.35
arrayDiskDellCertified mandatory
Indicates if array disk is certified by Dell.
Value: 1 - Certified, 0 - Not Certified, 99 - Unknown
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.36
arrayDiskAltaVendorId obsolete
Provides vendor information for Alta interposer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.37
arrayDiskAltaProductId obsolete
Provides product id for Alta interposer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.38
arrayDiskAltaRevisionId obsolete
Provides revision id for Alta interposer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.39
arrayDiskEncryptionCapable mandatory
Indicates if physical disk is Encryption capable.
Value: 1 - Capable, 0 - Not Capable, 99 - Not Applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.40
arrayDiskEncrypted mandatory
Indicates if the physical disk has encryption enabled.
Value: 1 - Yes, 0 - No, 99 - Not Applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.41
arrayDiskPowerState mandatory
Indicates power state of a physical drive.
Value: 0 - Spun up, 1- Spun down, 255 - Transition, 99 - Not Applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.42
arrayDiskDriveWriteCache mandatory
Indicates drive write cache capability for PCIe SSD devices.
Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined/Not Applicable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.43
arrayDiskModelNumber mandatory
Provides PCIe SSD device model number.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.44
arrayDiskLifeRemaining mandatory
Provides PCIe SSD device life remaining in percentage.
Value: 0..100, 999 - Undetermined/Not Applicable
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.45
arrayDiskDriverVersion mandatory
Provides PCIe SSD device driver version.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.46
arrayDiskDeviceLifeStatus mandatory
Provides PCIe SSD device life status.
Possible Values:
-1: Not Available / Not Applicable
1: Drive Health Good
2: Approaching Warranty Coverage Expiry
3: Warranty Coverage Expired
4: Approaching Read Only
5: Read Only
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.47
arrayDiskReadOnly mandatory
Provides PCIe SSD's Read Only attribute.
Possible Values: Yes, No, Not Applicable
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.48
arrayDiskRemainingRatedWriteEndurance mandatory
Provides PCIe SSD device Remaining Rated Write Endurance
Possible Values: 0-100% ,Not Available/Not Applicable
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.49
arrayDiskSectorSize mandatory
Provides the information regarding sector size of array disk.
Possible values are: 512 or 4096.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.50
arrayDiskPICapable mandatory
Provides the information regarding T10 PI capability of Array disk.
Possible values are: 0 (T10 PI incapable) or 1 (T10 PI capable).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.51
arrayDiskMaxLinkWidth mandatory
Provides the information regarding Max Link Width of Array disk.
Possible values are: 0 - 8.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.52
arrayDiskNegotiatedLinkWidth mandatory
Provides the information regarding Negtioated Link Width of Array disk.
Possible values are: 0 - 8.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.53
nonRAIDdiskCachePolicy mandatory
Displays the current disk write cache policy of the NonRAID disk.
Possible values are: Enabled - Disabled.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.54
arraydiskCachePolicy mandatory
Displays the current disk write cache policy of the array disk.
Possible values are: Enabled - Disabled - Default.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.55
arraydiskISECapable mandatory
A boolean value depicitng if the disk is Instant Secure Erase Capable or not.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.56
arraydiskWWN mandatory
Displays WWN for a disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.57
arraydiskEncryptionProtocol mandatory
Displays Encrption Protocol for a disk.
Possible Values:
0: No encryption
1: TCG Enterprise SSC
2: TCG Opal SSC
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.58
arraydiskErrorRecoverable mandatory
Indicates if INIT error drive is recoverable.
Values: 1- Yes, 0 - No, 99 - Not available / Not applicable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.59
arraydiskErrorDescription mandatory
Displays description of INIT error.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.60
arraydiskAvailableSpare mandatory
Displays Available Spare for a PCIe SSD.
Possible Values: 0-100 %
Note: A value of 9999 indicates Not Applicable or Not Available
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.4.1.61

arrayDiskEnclosureConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.5 · 1 row entry · 7 columns
Open in standard view 
A table of the connections between array disks, their enclosure, 
and their associated controller.  For each object in the table, its
object number corresponds to an instance number in the appropriate 
MIB table for that object where all of the object properties can be found.
Note: Only array disks that are part of an enclosure will be listed
in this table.  Backplanes are considered enclosures by
Storage Management.
arrayDiskEnclosureConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.5.1
An entry in the Array Disk Enclosure Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
arrayDiskEnclosureConnectionNumber
Column Syntax OID
arrayDiskEnclosureConnectionNumber mandatory
Instance number of this array disk connection entry.
This table shows the array disk to enclosure relationship.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.1
arrayDiskEnclosureConnectionArrayDiskName mandatory
The name of the array disk in this connection as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.2
arrayDiskEnclosureConnectionArrayDiskNumber mandatory
The instance number of the array disk in the arrayDiskTable
in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.3
arrayDiskEnclosureConnectionEnclosureName mandatory
The name of the enclosure as represented in Storage Management
to which this array disk belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.4
arrayDiskEnclosureConnectionEnclosureNumber mandatory
The instance number in the enclosureTable of the enclosure
to which this array disk belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.5
arrayDiskEnclosureConnectionControllerName mandatory
The name of the controller as represented in Storage Management
to which this array disk is connected.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.6
arrayDiskEnclosureConnectionControllerNumber mandatory
The instance number in the controllerTable of the controller
to which this array disk is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.5.1.7

arrayDiskChannelConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.6 · 1 row entry · 7 columns
Open in standard view 
A table of the connections between array disks, their channel, and 
their associated controller.  For each object in the table, its 
object number corresponds to an instance number in the appropriate 
MIB table for that object where all of the object properties can be 
found.
Note: Only array disks that are NOT part of an enclosure will be 
listed in this table.  Backplanes are considered enclosures by
Storage Management.
arrayDiskChannelConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.6.1
An entry in the Array Disk Channel Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
arrayDiskChannelConnectionNumber
Column Syntax OID
arrayDiskChannelConnectionNumber mandatory
Instance number of this array disk connection entry.
This table shows the array disk to SCSI channel relationship.
There is no enclosure service processor associated with these
array disks.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.1
arrayDiskChannelConnectionArrayDiskName mandatory
The name of the array disk in this connection
as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.2
arrayDiskChannelConnectionArrayDiskNumber mandatory
The instance number of the array disk in the arrayDiskTable
in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.3
arrayDiskChannelConnectionChannelName mandatory
The name of the channel as represented in Storage Management
to which is array disk is connected.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.4
arrayDiskChannelConnectionChannelNumber mandatory
The instance number of the channel in the channelTable to
which this array disk is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.5
arrayDiskChannelConnectionControllerName mandatory
The name of the controller as represented in Storage Management
to which this array disk is connected.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.6
arrayDiskChannelConnectionControllerNumber mandatory
The instance number in the controllerTable of the controller
to which this array disk is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.6.1.7

fanTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.7 · 1 row entry · 17 columns
Open in standard view 
A table of managed Fans. The number of entries is 
related to number of Fans discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
fanEntry entry .1.3.6.1.4.1.674.10893.1.20.130.7.1
An entry in the Fan table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
fanNumber
Column Syntax OID
fanNumber mandatory
Instance number of this fan entry.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.1
fanName mandatory
The fan's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.2
fanVendor mandatory
The fan's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.3
fanState mandatory
The current condition of the fan.
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
6: Degraded
21: Missing
Enumeration
Enumerated Values:
1ready
2failed
6degraded
11removed
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.4
fanSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.5
fanProbeUnit obsolete
This entry is obsolete for Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.6
fanProbeMinWarning obsolete
This entry is obsolete. This setting is not supported
by fans managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.7
fanProbeMinCritical obsolete
This entry is obsolete. This setting is not supported
by fans managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.8
fanProbeMaxWarning obsolete
This entry is obsolete. This setting is not supported
by fans managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.9
fanProbeMaxCritical obsolete
This entry is obsolete. This setting is not supported
by fans managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.10
fanProbeCurrValue mandatory
The current speed of the fan.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.11
fan1PartNumber mandatory
The part number of the fan in the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.12
fan2PartNumber obsolete
This entry is obsolete. This setting is not supported
by fans managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.13
fanRollUpStatus mandatory
Severity of the fan state.
This is the combined status of the fan and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.14
fanComponentStatus mandatory
The status of the fan itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.15
fanNexusID mandatory
Durable unique ID for this fan.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.16
fanRevision mandatory
The revision number of the fan in the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.7.1.17

fanConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.8 · 1 row entry · 5 columns
Open in standard view 
A table of the connections between each fan on 
the managed node and its enclosure.  Each enclosure 
number in the table corresponds to that enclosure instance
in the Enclosure Table.
fanConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.8.1
An entry in the Fan Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
fanConnectionNumber
Column Syntax OID
fanConnectionNumber mandatory
Instance number of this fan connection entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.8.1.1
fanConnectionFanName mandatory
The name of the fan in this connection as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.8.1.2
fanConnectionFanNumber mandatory
The instance number of the fan in the fanTable in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.8.1.3
fanConnectionEnclosureName mandatory
The name of the enclosure as represented in Storage Management
to which this fan belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.8.1.4
fanConnectionEnclosureNumber mandatory
The instance number of the enclosure in the enclosureTable
to which this fan belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.8.1.5

powerSupplyTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.9 · 1 row entry · 11 columns
Open in standard view 
A table of managed Power Supplies. The number of entries is 
related to number of Power Supplies discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
powerSupplyEntry entry .1.3.6.1.4.1.674.10893.1.20.130.9.1
An entry in the Power Supply table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
powerSupplyNumber
Column Syntax OID
powerSupplyNumber mandatory
Instance number of this power supply entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.1
powerSupplyName mandatory
The power supply's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.2
powerSupplyVendor mandatory
The power supply's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.3
powerSupplyState mandatory
The current condition of the power supply.
Possible states:
0 : Unknown
1 : Ready
2 : Failed
5 : Not Installed
6 : Degraded
11: Removed
21: Missing
Enumeration
Enumerated Values:
1ready
2failed
5notInstalled
6degraded
11removed
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.4
powerSupplySeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.5
powerSupply1PartNumber mandatory
The part number of the power supply of the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.6
powerSupply2PartNumber obsolete
This entry is obsolete. This setting is not supported
by power supplies managed under Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.7
powerSupplyRollUpStatus mandatory
Severity of the power supply state.
This is the combined status of the power supply and its
components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.8
powerSupplyComponentStatus mandatory
The status of the power supply itself without the
propegation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.9
powerSupplyNexusID mandatory
Durable unique ID for this power supply.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.10
powerSupplyRevision mandatory
The revision number of the power supply in the enclosure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.9.1.11

powerSupplyConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.10 · 1 row entry · 6 columns
Open in standard view 
A table of the connections between each power 
supply on the managed node and its enclosure.  Each
enclosure number in the table corresponds to that 
enclosure instance in the Enclosure Table.
powerSupplyConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.10.1
An entry in the Power Supply Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
powerSupplyConnectionNumber
Column Syntax OID
powerSupplyConnectionNumber mandatory
Instance number of this power supply connection entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.1
powerSupplyConnectionPowersupplyName mandatory
The name of the power supply in this connection
as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.2
powerSupplyConnectionPowersupplyNumber mandatory
This instance number in the powersupplyTable
of the power supply in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.3
powerSupplyConnectionEnclosureName mandatory
The name of the enclosure to which this power supply is
connected as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.4
powerSupplyConnectionEnclosureNumber mandatory
The instance number of the enclosure in the enclosureTable
to which this power supply is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.5
powerSupplyConnectionFirmwareVersion mandatory
Displays power supply connection firmware version.
Note: Available above 1.04 firmware version
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.10.1.6

temperatureProbeTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.11 · 1 row entry · 14 columns
Open in standard view 
A table of managed Temperature Probes. The number of entries is 
related to number of Temperature Probes discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
temperatureProbeEntry entry .1.3.6.1.4.1.674.10893.1.20.130.11.1
An entry in the Temperature Probe table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
temperatureProbeNumber
Column Syntax OID
temperatureProbeNumber mandatory
Instance number of this temperature probe entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.1
temperatureProbeName mandatory
Name of this temperature probe as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.2
temperatureProbeVendor mandatory
Temperature probe's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.3
temperatureProbeState mandatory
The current condition of the temperature probe.
Possible states:
0: Unknown
1: Ready
2: Failed (Minimum Failure Threshold Exceeded,
Maximum Failure Threshold Exceeded)
4: Offline
6: Degraded (Minimum Wa…
Enumeration
Enumerated Values:
1ready
2failed
4offline
6degraded
9inactive
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.4
temperatureProbeSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.5
temperatureProbeUnit mandatory
The units that will be used to display temperatures for this
temperature probe.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.6
temperatureProbeMinWarning mandatory
The minimum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.7
temperatureProbeMinCritical mandatory
The minimum temperature that will force the probe into
an error state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.8
temperatureProbeMaxWarning mandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.9
temperatureProbeMaxCritical mandatory
The maximum temperature that will force the probe into
an error state.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.10
temperatureProbeCurValue mandatory
The current temperature of this probe.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.11
temperatureProbeRollUpStatus mandatory
Severity of the temperature probe state.
This is the combined status of the temperature probe
and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.12
temperatureProbeComponentStatus mandatory
The status of the temperature probe itself without the propagation
of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.13
temperatureProbeNexusID mandatory
Durable unique ID for this temperature probe.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.11.1.14

temperatureConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.12 · 1 row entry · 5 columns
Open in standard view 
A table of the connections between each 
temperature probe on the managed node and its enclosure. 
Each enclosure number in the table corresponds to that 
enclosure instance in the Enclosure Table.
temperatureConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.12.1
An entry in the Temperature Probe Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
temperatureConnectionNumber
Column Syntax OID
temperatureConnectionNumber mandatory
Instance number of this temperature probe connection entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.12.1.1
temperatureConnectionTemperatureName mandatory
The name of the temperature probe in this connection as
represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.12.1.2
temperatureConnectionTemperatureNumber mandatory
The instance number in the temperatureTable of the temperature probe in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.12.1.3
temperatureConnectionEnclosureName mandatory
The name of the enclosure as represented in Storage Management
to which this temperature probe belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.12.1.4
temperatureConnectionEnclosureNumber mandatory
The instance number of the enclosure in the enclosureTable
to which this temperature probe belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.12.1.5

enclosureManagementModuleTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.13 · 1 row entry · 13 columns
Open in standard view 
A table of managed Enclosure Management Modules. The number of 
entries is related to number of Enclosure Management Modules
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
enclosureManagementModuleEntry entry .1.3.6.1.4.1.674.10893.1.20.130.13.1
An entry in the Enclosure Management Module table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
enclosureManagementModuleNumber
Column Syntax OID
enclosureManagementModuleNumber mandatory
Instance number of this enclosure memory module entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.1
enclosureManagementModuleName mandatory
Name of this enclosure memory module as represented in
Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.2
enclosureManagementModuleVendor mandatory
The management module's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.3
enclosureManagementModuleState mandatory
The current condition of the enclosure management
module.
Possible states:
0: Unknown
1: Ready
2: Failed
3: Online
4: Offline
5: Not Installed
6: Degraded
21: Missing
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
5notInstalled
6degraded
21missing
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.4
enclosureManagementModuleSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.5
enclosureManagementModulePartNumber mandatory
The part number of the enclosure memory module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.6
enclosureManagementModuleType mandatory
The type of the enclosure management module.
Possible values:
0: Unknown
1: EMM
2: Termination Card
Enumeration
Enumerated Values:
1eMM
2terminationCard
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.7
enclosureManagementModuleFWVersion mandatory
Firmware version of the enclosure memory module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.8
enclosureManagementModuleMaxSpeed mandatory
The maximum bus speed of the enclosure management module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.9
enclosureManagementModuleRollUpStatus mandatory
Severity of the enclosure management module state.
This is the combined status of the EMM and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.10
enclosureManagementModuleComponentStatus mandatory
The status of the enclosure management module itself
without the propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.11
enclosureManagementModuleNexusID mandatory
Durable unique ID for this EMM.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.12
enclosureManagementModuleRevision mandatory
The revision number of the enclosure management module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.13.1.13

enclosureManagementModuleConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.14 · 1 row entry · 5 columns
Open in standard view 
A table of the connections between each enclosure management module 
on the managed node and its enclosure.  Each enclosure 
number in the table corresponds to that enclosure instance
in the Enclosure Table.
enclosureManagementModuleConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.14.1
An entry in the Enclosure Management Module Connection table . A row in this
table cannot be created or deleted by SNMP operations on columns of the table.
Indexes
enclosureManagementModuleConnectionNumber
Column Syntax OID
enclosureManagementModuleConnectionNumber mandatory
Instance number of this enclosure management module
connection entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.14.1.1
enclosureManagementModuleConnectionEMMName mandatory
The name of the enclosure management module in this
connection as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.14.1.2
enclosureManagementModuleConnectionEMMNumber mandatory
The instance number of the enclosure management module in
the enclosureManagementModuleTable in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.14.1.3
enclosureManagementModuleConnectionEnclosureName mandatory
The name of the enclosure as represented in Storage Management
to which this enclosure management module belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.14.1.4
enclosureManagementModuleConnectionEnclosureNumber mandatory
The instance number of the enclosure in the enclosureTable
to which this enclosure management module belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.14.1.5

batteryTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.15 · 1 row entry · 15 columns
Open in standard view 
A table of managed Batteries. The number of 
entries is related to number of Batteries
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
batteryEntry entry .1.3.6.1.4.1.674.10893.1.20.130.15.1
An entry in the Battery table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
batteryNumber
Column Syntax OID
batteryNumber mandatory
Instance number of this battery entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.1
batteryName mandatory
The battery's name as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.2
batteryVendor mandatory
The battery's (re)seller's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.3
batteryState mandatory
Current state of battery.
Possible values:
0: Unknown
1: Ready
2: Failed
6: Degraded
7: Reconditioning
9: High
10: Low Power
12: Charging
21: Missing
36: Learning
Enumeration
Enumerated Values:
1ready
2failed
6degraded
7reconditioning
9high
10low
12charging
21missing
36learning
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.4
batteryRollUpStatus mandatory
Severity of the battery state.
This is the combined status of the battery and its components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.5
batteryComponentStatus mandatory
The status of the battery itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.6
batteryChargeCount mandatory
The number of charges that have been applied to the battery.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.7
batteryMaxChargeCount mandatory
The maximum number of charges that can be applied to the battery.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.8
batteryNexusID mandatory
Durable unique ID for this battery.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.9
batteryPredictedCapacity obsolete
This property displays the battery's ability to be charged.
Possible values:
1: Failed - The battery cannot be charged and needs to be replaced.
2: Ready - The battery can be charged to full capacity.
4: Unknown -…
Enumeration
Enumerated Values:
1failed
2ready
4unknown
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.10
batteryNextLearnTime obsolete
Time next learn cycle must be executed (in hours.)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.11
batteryLearnState obsolete
Specifies the learn state activity of the battery.
Possible values:
1 : Failed
2 : Active
4 : Timed out
8 : Requested
16: Idle
32: Due
Enumeration
Enumerated Values:
1failed
2active
4timedOut
8requested
16idle
32due
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.12
batteryID mandatory
Represents unique id for battery.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.13
batteryMaxLearnDelay obsolete
The maximum amount of time (in hours) that the battery learn cycle can be delayed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.14
batteryLearnMode obsolete
Indicates current learn mode of the battery.
Possible values:
1: Auto
2: Warn
4: Autowarn
8: Unknown
Enumerationr/w
Enumerated Values:
1auto
2warn
4autowarn
8unknown
 .1.3.6.1.4.1.674.10893.1.20.130.15.1.15

batteryConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.16 · 1 row entry · 5 columns
Open in standard view 
A table of the connections between each 
battery on the managed node and its controller. 
Each controller number in the table corresponds to that 
controller instance in the Controller Table.
batteryConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.130.16.1
An entry in the Battery Connection table . A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
batteryConnectionNumber
Column Syntax OID
batteryConnectionNumber mandatory
Instance number of this battery connection entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.16.1.1
batteryConnectionBatteryName mandatory
The name of the battery in this connection as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.16.1.2
batteryConnectionBatteryNumber mandatory
The instance number in the batteryTable of the battery in this connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.16.1.3
batteryConnectionControllerName mandatory
The name of the controller as represented in Storage Management
to which this battery belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.16.1.4
batteryConnectionControllerNumber mandatory
The instance number of the controller in the controllerTable
to which this battery belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.16.1.5

tapeDriveTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.17 · 1 row entry · 8 columns
Open in standard view 
A table of listed Tape Drives The number of entries is 
related to number of Tape Drives discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
tapeDriveEntry entry .1.3.6.1.4.1.674.10893.1.20.130.17.1
An entry in the Tape Library table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
tapeDriveNumber
Column Syntax OID
tapeDriveNumber mandatory
Instance number of this tape drive entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.1
tapeDriveName mandatory
The name of the tape drive as represented in Storage Management.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.2
tapeDriveVendor mandatory
The tape drive's manufacturer's name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.3
tapeDriveProductID mandatory
The model number of the tape drive
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.4
tapeDriveNexusID mandatory
Durable unique ID for this tape drive
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.5
tapeDriveBusType mandatory
The bus type of the tape drive.
Possible values:
8. SAS
Enumeration
Enumerated Values:
8sas
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.6
tapeDriveSASAddress mandatory
The specified SAS address if this is a SAS tape drive.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.7
tapeDriveMediaType mandatory
The Media type of the tape drive.
Possible Values:
4:Tape
Enumeration
Enumerated Values:
4tape
 .1.3.6.1.4.1.674.10893.1.20.130.17.1.8

nvmeAdapterTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.130.18 · 1 row entry · 29 columns
Open in standard view 
A table of listed NVME Adapter cards. The number of entries is 
related to number of NVME Adapter cards discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
nvmeAdapterEntry entry .1.3.6.1.4.1.674.10893.1.20.130.18.1
An entry in the NvmeAdapter table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
nvmeAdapterNumber
Column Syntax OID
nvmeAdapterNumber mandatory
Instance number of this NVME Adapter entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.1
nvmeAdapterState mandatory
The current state of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.2
nvmeAdapterControllerNum mandatory
The PCIeSSD subsystem Id to which the NVMe Adapter belongs to.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.3
nvmeAdapterPCISlot mandatory
The PCI slot of the system where the adapter card is connected.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.4
nvmeAdapterDeviceName mandatory
The device name of the NVMe Adapter as it is represented in OMSA and also the operating system.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.5
nvmeAdapterVendor mandatory
NVMe Adapter manufacturer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.6
nvmeAdapterProductID mandatory
The product id or part number of the NVMe Adapter
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.7
nvmeAdapterSerialNumber mandatory
Product serial number of the NVMe Adapter.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.8
nvmeAdapterRevision mandatory
The NVMe Adapter revision.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.9
nvmeAdapterDriverVersion mandatory
NVMe Adapter driver version.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.10
nvmeAdapterPCIBusNo mandatory
The PCI Bus number of the NVMe adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.11
nvmeAdapterPCIDeviceNum mandatory
The PCI device number of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.12
nvmeAdapterPCIFuncNum mandatory
The PCI device number of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.13
nvmeAdapterNexusID mandatory
Nexus ID of the NVMe Adapter.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.14
nvmeAdapterBusProtocolType mandatory
The Bus protocol for NVMe device, expected value: 9 (PCIeSSD).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.15
nvmeAdapterMediaType mandatory
NVMe Adapter media type.
Possible Values:
1:unknown
2:ssd
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.16
nvmeAdapterLengthInMegaBytes mandatory
Size in megabytes of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.17
nvmeAdapterLengthOffsetBytes mandatory
No of bytes after total number of megabytes have been subtracted from the total size of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.18
nvmeAdapterDeviceID mandatory
The device Id of the NVMe Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.19
nvmeAdapterModelNumber mandatory
Model number of the NVMe Adapter as per the manufacturer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.20
nvmeAdapterNegotiatedSpeed mandatory
The negotiated speed of the NVMe adapter in GT/s.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.21
nvmeAdapterCapableSpeed mandatory
The maximum rated speed of the NVMe adapter in GT/s.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.22
nvmeAdapterRemainingRatedWrEnd mandatory
The remaining percentage of writes on the NVME device
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.23
nvmeAdapterFormFactor mandatory
The form factor of the NVMe Adapter.
Expected Value: 2
means (Card)
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.24
nvmeAdapterSupportedSpec mandatory
The NVMe specification supported by the device.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.25
nvmeAdapterMaxLinkWidth mandatory
The maximum bus width of NVME Adapter
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.26
nvmeAdapterNegotiatedLinkWidth mandatory
The negotiated bus width of NVME Adapter.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.27
nvmeAdapterSubVendor mandatory
Sub vendor of the NVMe Adapter device.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.28
nvmeAdapterAvailableSpare mandatory
The remaining available spare space on the NVME device
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.130.18.1.29

virtualDiskTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.1 · 1 row entry · 28 columns
Open in standard view 
A table of managed Virtual Disks. The number of entries is related
to number of Virtual Disks discovered in the system. 
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
virtualDiskEntry entry .1.3.6.1.4.1.674.10893.1.20.140.1.1
An entry in the Virtual Disk table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
virtualDiskNumber
Column Syntax OID
virtualDiskNumber mandatory
Instance number of this virtual disk entry.
Integer32
Constraints:
range: 1-100000000
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.1
virtualDiskName mandatory
The virtual disk's label generated by Storage Management or entered
by the user.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.2
virtualDiskDeviceName mandatory
Device name used by this virtual disk's member disks.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.3
virtualDiskState mandatory
The current condition of this virtual disk
(which includes any member array disks.)
Possible states:
0: Unknown
1: Ready - The disk is accessible and has no known problems.
2: Failed - Access has been lost to the da…
Enumeration
Enumerated Values:
1ready
2failed
3online
4offline
6degraded
7verifying
15resynching
16regenerating
18failedRedundancy
24rebuilding
26formatting
32reconstructing
35initializing
36backgroundInit
52permanentlyDegraded
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.4
virtualDiskSeverity obsolete
This entry is obsolete for Storage Management.
It was replaced with RollUpStatus and ComponentStatus for each device.
Enumeration
Enumerated Values:
1warning
2error
3failure
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.5
virtualDiskLengthInMB mandatory
The size of this virtual disk in megabytes. If this size
is 0, it is smaller than a megabyte.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.6
virtualDiskLengthInBytes mandatory
The portion of the virtual disk in bytes that is smaller
than a megabyte. This size plus the virtualDiskLengthInMB
is the total size of the virtual disk.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.7
virtualDiskFreeSpaceInMB obsolete
This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.8
virtualDiskFreeSpaceInBytes obsolete
This entry is obsolete. This property is not supported for virtual disks managed under Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.9
virtualDiskWritePolicy mandatory
Indicates whether the controller's write cache will be used
when writing to a virtual disk.
Possible values:
1: Enabled - Adaptec Write Cache Enabled Protected
2: Disabled - Adaptec Write Cache Disabled
3: LSI Write Ba…
Enumeration
Enumerated Values:
1enabled
2disabled
3writeBack
4writeThrough
5enabledAlways
6forceWriteback
7enabledAlwaysSAS
9notApplicable
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.10
virtualDiskReadPolicy mandatory
Indicates whether the controller's read cache will be used
when reading from a virtual disk.
Possible values:
1: Enabled - Adaptec Read Cache Enabled
2: Disabled - Adaptec Read Cache Disabled
3: LSI Read Ahead
4: LSI A…
Enumeration
Enumerated Values:
1enabled
2disabled
3readAhead
4adaptiveReadAhead
5noReadAhead
9notApplicable
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.11
virtualDiskCachePolicy mandatory
Indicates whether the controller's cache is used when
reading from or writing to a virtual disk.
Possible values:
1: Direct I/O (LSI)
2: Cached I/O (LSI)
99: Not applicable
Enumeration
Enumerated Values:
1directIO
2cachedIO
99not-applicable
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.12
virtualDiskLayout mandatory
The virtual disk's RAID type.
Currently supported types:
1: Concatenated
2: RAID-0
3: RAID-1
7: RAID-5
8: RAID-6
10: RAID-10
12: RAID-50
19: Concatenated RAID 1
24: RAID-60
25: CacheCade
Enumeration
Enumerated Values:
1concatenated
2raid-0
3raid-1
4raid-2
5raid-3
6raid-4
7raid-5
8raid-6
9raid-7
10raid-10
11raid-30
12raid-50
13addSpares
14deleteLogical
15transformLogical
18raid-0-plus-1
19concatRaid-1
20concatRaid-5
21noRaid
22volume
23raidMorph
24raid-60
25cacheCade
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.13
virtualDiskCurStripeSizeInMB mandatory
The stripe size of this virtual disk in megabytes. If this
size is 0, it is either smaller than a megabyte or not applicable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.14
virtualDiskCurStripeSizeInBytes mandatory
The portion of the stripe size in bytes that is smaller
than a megabyte. This size plus the virtualDiskCurStripeSizeInMB
is the total stripe size on the virtual disk.
If this size is 0, either the entire size is whole…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.15
virtualDiskChannel obsolete
This entry is obsolete. This property is not supported
by virtual disks managed under Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.16
virtualDiskTargetID mandatory
Unique ID for the virtual disk.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.17
virtualDiskLunID obsolete
This entry is obsolete. This property is not supported
by virtual disks managed under Storage Management.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.18
virtualDiskRollUpStatus mandatory
Severity of the virtual disk state.
This is the combined status of the virtual disk and its
components.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.19
virtualDiskComponentStatus mandatory
The status of the virtual disk itself without
the propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
DellStatus
Textual Convention: DellStatus Enumeration
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.20
virtualDiskNexusID mandatory
Durable unique ID for this virtual disk.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.21
virtualDiskArrayDiskType mandatory
Identifies the type of array (physical) disks used to create the virtual disk.
Possible values:
1: SAS
2: SATA
3: SCSI
4: IDE
5: PCIE
99: Unknown
Enumeration
Enumerated Values:
1sas
2sata
3scsi
4ide
5pcie
99unknown
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.22
virtualDiskBadBlocksDetected mandatory
Indicates if virtual disk has bad blocks.
Value: 0 - No, 1 - Yes, 2 - Not Applicable, 99 - Unknown
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.23
virtualDiskEncrypted mandatory
Indicates if virtual disk is encrypted.
Value: 0 - No, 1 - Yes, 99 - Unknown.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.24
virtualDiskIsCacheCade mandatory
Indicates if this virtual disk is configured as CacheCade.
Value: 1 - Yes, 0 - No, 99 - Undetermined
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.25
virtualDiskDiskCachePolicy mandatory
Indicates disk cache policy of the logical device.
Value: 1 - Unchanged, 2 - Enabled, 4 - Disabled, 8 - Default, 10 - Undetermined
Enumeration
Enumerated Values:
1unchanged
2enabled
4disabled
8default
10undetermined
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.26
virtualDiskAssociatedFluidCacheStatus mandatory
Indicates the status of the associated fluid cache status
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.27
virtualDiskPIEnable mandatory
Indicates if T10 PI is enabled on a virtual disk.
Possible values are: 0 (T10 PI disabled) or 1 (T10 PI enabled).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.1.1.28

virtualDiskPartitionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.2 · 1 row entry · 6 columns
Open in standard view 
A table of managed Virtual Disk Partitions. The number of entries is related
to number of partitions discovered in the system. The maximum number of 
entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
virtualDiskPartitionEntry entry .1.3.6.1.4.1.674.10893.1.20.140.2.1
An entry in the Virtual Disk Partition table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
virtualDiskPartitionNumber
Column Syntax OID
virtualDiskPartitionNumber mandatory
Instance number of this partition entry
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.140.2.1.1
virtualDiskPartitionDeviceName mandatory
Device name of the partition given by the operating system.
OctetString .1.3.6.1.4.1.674.10893.1.20.140.2.1.2
virtualDiskPartitionState mandatory
State of the partition. This is mapped stated of the associate virtual disk.
1: Active - Mapped cache disk is working fine
2: No - Fluid caching is not enabled
3: Removing - This is a transient stage duing the process o…
Enumeration
Enumerated Values:
1active
2no
3removing
4failed
 .1.3.6.1.4.1.674.10893.1.20.140.2.1.3
virtualDiskPartitionSize mandatory
Size of the Partition in GB.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.2.1.4
virtualDiskPartitionFluidCacheStatus mandatory
Indicates if the partition has associated fluidcache
OctetString .1.3.6.1.4.1.674.10893.1.20.140.2.1.5
virtualDiskPartitionNexusID mandatory
Durable unique ID for this partition. This comprises the controllerID, virtualDisk ID and hash mapped WWN number of this partition
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.2.1.6

arrayDiskLogicalConnectionTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.3 · 1 row entry · 7 columns
Open in standard view 
A table of the connections between array disks, the 
virtual disk to which they belong, and their
associated logical disk. For each object in the table, 
its object number corresponds to an instance number in 
the appropriate MIB table for that object where all of 
the object properties can be found.
arrayDiskLogicalConnectionEntry entry .1.3.6.1.4.1.674.10893.1.20.140.3.1
An entry in the Array Disk Logical Connection table . A row in this table
cannot be created or deleted by SNMP operations on columns of the table.
Indexes
arrayDiskLogicalConnectionNumber
Column Syntax OID
arrayDiskLogicalConnectionNumber mandatory
Instance number of this array disk logical connection entry.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.1
arrayDiskLogicalConnectionArrayDiskName mandatory
The name of the array disk in this logical connection.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.2
arrayDiskLogicalConnectionArrayDiskNumber mandatory
The instance number of the array disk in this logical connection.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.3
arrayDiskLogicalConnectionVirtualDiskName mandatory
The name of the virtual disk to which this array disk belongs.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.4
arrayDiskLogicalConnectionVirtualDiskNumber mandatory
The instance number of the virtual disk to which this array disk
belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.5
arrayDiskLogicalConnectionDiskName mandatory
The name of the disk group to with this array disk belongs.
This property is currently not supported.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.6
arrayDiskLogicalConnectionDiskNumber mandatory
This instance number of the disk group to with this array disk belongs.
This property is currently not supported.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.3.1.7

fluidCacheTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.4 · 1 row entry · 16 columns
Open in standard view 
A table of managed FluidCache. The number of entries is related to FluidCache discovered in the system. 
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all entries.
fluidCacheEntry entry .1.3.6.1.4.1.674.10893.1.20.140.4.1
An entry in the Fluid Cache table.
A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Indexes
fluidCacheNumber
Column Syntax OID
fluidCacheNumber mandatory
Instance number of this fluid cache entry
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.140.4.1.1
fluidCacheName mandatory
The name of the fluidcache in this subsystem as represented in Storage Management.
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.2
fluidCacheLicenseState mandatory
License state of the associated fluid cache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.3
fluidCacheLicenseValidity mandatory
This entry displays the number of days the fluid cache license is valid. It has to be read in parallel to license type.
Incase of site wide license, value '0' should be read as 'Not Applicable'
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.4.1.4
fluidCacheLicenseEntitlementID mandatory
Indiactes the Entitlement Identifier for the license of the fluid cache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.5
fluidCacheLicenseDuration mandatory
Indicates the duration of the the license validity
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.6
fluidCacheLicenseCapacity mandatory
Indicates the capacity of the license of fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.7
fluidCacheLicenseRemaining mandatory
Indicates the remaining days of the license validity
OctetStringr/w .1.3.6.1.4.1.674.10893.1.20.140.4.1.8
fluidCacheLicenseType mandatory
Indicates the type of the license of the fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.9
fluidCacheLicenseVendor mandatory
Indicates the license vendor for the fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.10
fluidCacheLicenseProductId mandatory
Indicates the product ID of the license of the fluidcache susbsytem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.11
fluidCacheLicenseDateSold mandatory
Indicates the date on which the license for the fluidcache subsystem is sold
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.12
fluidCacheLicenseGeneration mandatory
Indicates the generation of the license for the fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.13
fluidCacheLicenseFeatureID mandatory
Indicates the license feature ID of the fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.14
fluidCacheLicenseFeatureDescription mandatory
Provides the description of the license feature of fluidcache subsystem
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.15
fluidCacheNexus mandatory
Indicates the unique ID of the fludicache component
OctetString .1.3.6.1.4.1.674.10893.1.20.140.4.1.16

fluidCacheDiskTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.5 · 1 row entry · 10 columns
Open in standard view 
Indicates the Disk Table of the fludicache component
fluidCacheDiskEntry entry .1.3.6.1.4.1.674.10893.1.20.140.5.1
Indicates the Disk Number of the fludicache component
Indexes
fluidCacheDiskNumber
Column Syntax OID
fluidCacheDiskNumber mandatory
Instance number of the fluidCacheDisk entry
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.1
fluidCacheDiskName mandatory
Name of the Fluid Cache Disk Name as seen by storage management
OctetString .1.3.6.1.4.1.674.10893.1.20.140.5.1.2
fluidCacheDiskState mandatory
State of the FluidCacheDisk entry
Valid values are
2 - Active, otherwise Inactive
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.3
fluidCacheDiskBackendDeviceType mandatory
This displays the type of the backend device beneath the fluid cache disk.
Values are as below
773 denotes VirtualDisk
791 denotes Partition
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.4
fluidCacheDiskBackendDeviceName mandatory
Device name of the backend device as seen by the operating system
OctetString .1.3.6.1.4.1.674.10893.1.20.140.5.1.5
fluidCacheDiskBackendDeviceSize mandatory
Size of the Backend device. Size is indicated in GB
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.6
fluidCacheDiskOperatingMode mandatory
Operating mode of the FluidCache. Values are
0 - Writeback mode
1 - Writethrough mode
2 - PassThrough mode
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.7
fluidCacheDiskConfiguredMode mandatory
Configured Mode of the FluidCache. The values are
0 - Writeback mode
1 - Writethrough mode
2 - PassThrough mode
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.8
fluidCacheDiskNexus mandatory
Durable Unique ID of the fluidcache disk
OctetStringr/w .1.3.6.1.4.1.674.10893.1.20.140.5.1.9
fluidCacheDiskStatus mandatory
Severity of the fluid cache disk state.

Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.5.1.10

fluidCachePoolTable

table mandatory
.1.3.6.1.4.1.674.10893.1.20.140.6 · 1 row entry · 8 columns
Open in standard view 
Indicates the Pool Table of the fludicache component
fluidCachePoolEntry entry .1.3.6.1.4.1.674.10893.1.20.140.6.1
Indicates the Pool Number of the fludicache component
Indexes
fluidCachePoolNumber
Column Syntax OID
fluidCachePoolNumber mandatory
Instance number of the fluid cachepool entry
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10893.1.20.140.6.1.1
fluidCachePoolStoreCount mandatory
Number of flash devices that are part of the fluidcache pool
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.6.1.2
fluidCachePoolUUID mandatory
UUID of the fluidcache pool
OctetString .1.3.6.1.4.1.674.10893.1.20.140.6.1.3
fluidCachePoolLicenseState mandatory
State of the fluid cache license.
Possible values: Valid, Evaluation, Expired
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.674.10893.1.20.140.6.1.4
fluidCachePoolSize mandatory
Size of the fluidcache pool in GiB
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.6.1.5
fluidCachePoolHighAvailabilityState mandatory
Indicates if the fluidcache pool is operating in high availability mode.
OctetString .1.3.6.1.4.1.674.10893.1.20.140.6.1.6
fluidCachePoolNexus mandatory
Durable unique ID of the fluidcache pool entry
OctetString .1.3.6.1.4.1.674.10893.1.20.140.6.1.7
fluidCachePoolStatus mandatory
Severity of the fluid cache pool table state.

Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10893.1.20.140.6.1.8