arrayDiskDeviceLifeStatus

StorageManagement-MIB · .1.3.6.1.4.1.674.10893.1.20.130.4.1.47
MIB view Table view

Object

column mandatory Integer32 
Provides PCIe SSD device life status.
Possible Values:
-1: Not Available / Not Applicable
1: Drive Health Good
2: Approaching Warranty Coverage Expiry
3: Warranty Coverage Expired
4: Approaching Read Only
5: Read Only

Context

MIB
StorageManagement-MIB
OID
.1.3.6.1.4.1.674.10893.1.20.130.4.1.47
Type
column
Access
readonly
Status
mandatory
Parent
arrayDiskEntry
Table
arrayDiskTable
Siblings
60

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
arrayDiskNumber mandatory
Instance number of this array disk entry.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.1
arrayDiskChannel mandatory
The bus to which this array disk is connected.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.10
arrayDiskLengthInMB mandatory
The size in megabytes of the array disk. If this size is 0, it is smaller than a megabyte.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.11
arrayDiskLengthInBytes mandatory
The size of the array disk in bytes that is less than a megabyte. This size plus the arrayDiskLengthInMB is the total size of the array disk.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.12
arrayDiskLargestContiguousFreeSpaceInMB mandatory
The size in megabytes of the largest contiguous free space on the array disk. If this size is 0, it is less than a megabyte.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.13
arrayDiskLargestContiguousFreeSpaceInBytes mandatory
The size of the largest contiguous free space on this array disk in bytes that is less than a megabyte. This size plus the arrayDiskLargestContiguousFreeSpaceInMB is the total s…
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.14
arrayDiskTargetID mandatory
The SCSI target ID which this array disk is assigned.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.15
arrayDiskLunID mandatory
The array disk's logical unit number.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.16
arrayDiskUsedSpaceInMB mandatory
The amount in megabytes of the used space on the array disk. If this size is 0, it is smaller than a megabyte.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.17
arrayDiskUsedSpaceInBytes mandatory
The size in bytes of the used space on the array disk that is smaller than a megabyte. This size plus the arrayDiskUsedSpaceInMB is the total amount of used space on the array d…
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.18
arrayDiskFreeSpaceInMB mandatory
The amount in megabytes of the free space on the array disk. If this size is 0, it is smaller than a megabyte.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.19
arrayDiskName mandatory
The name of the array disk as represented in Storage Management.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.2
arrayDiskFreeSpaceInBytes mandatory
The size in bytes of the free space on the array disk that is smaller than a megabyte. This size plus the arrayDiskFreeSpaceInMB is the total amount of free space on the array d…
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.20
arrayDiskBusType mandatory
The bus type of the array disk. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: SSA 6: USB 7: SATA 8: SAS 9: PCIe
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.21
arrayDiskSpareState mandatory
The status of the array disk as a spare. Possible states: 1 : disk is a member of a virtual disk 2 : disk is a member of a disk group 3 : disk is a global hot spare 4 : disk is a …
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.22
arrayDiskRollUpStatus mandatory
Severity of the array disk state. This is the combined status of the array disk and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non…
columnDellStatus.1.3.6.1.4.1.674.10893.1.20.130.4.1.23
arrayDiskComponentStatus mandatory
The status of the array disk itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-rec…
columnDellStatus.1.3.6.1.4.1.674.10893.1.20.130.4.1.24
arrayDiskDeviceName mandatory
The operating system device name for this disk. This property is only applicable to array disks attached to a RAID controller.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.25
arrayDiskNexusID mandatory
Durable unique ID for this array disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.26
arrayDiskPartNumber mandatory
The part number of the disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.27
arrayDiskSASAddress mandatory
The specified SAS address if this is a SAS disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.28
arrayDiskNegotiatedSpeed mandatory
The speed at which the drive is actually running in MPS (megabytes per second).
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.29
arrayDiskVendor mandatory
The array disk's manufacturer's name.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.3
arrayDiskCapableSpeed mandatory
The maximum speed at which the drive is capable of negotiating in MPS (megabytes per second).
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.30
arrayDiskSmartAlertIndication mandatory
Indicated whether the disk has received a predictive failure. Possible values: 1: No - disk has not received a predictive failure alert 2: Yes - disk has received a predictive fai…
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.31
arrayDiskManufactureDay mandatory
The day of the week (1=Sunday thru 7=Saturday) on which this disk was manufactured.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.32
arrayDiskManufactureWeek mandatory
The week (1 thru 53) in which this disk was manufactured.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.33
arrayDiskManufactureYear mandatory
The four digit year in which this disk was manufactured.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.34
arrayDiskMediaType mandatory
The Media type of the array disk. Possible Values: 1:unknown 2:hdd 3:ssd
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.35
arrayDiskDellCertified mandatory
Indicates if array disk is certified by Dell. Value: 1 - Certified, 0 - Not Certified, 99 - Unknown
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.36
arrayDiskAltaVendorId obsolete
Provides vendor information for Alta interposer.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.37
arrayDiskAltaProductId obsolete
Provides product id for Alta interposer.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.38
arrayDiskAltaRevisionId obsolete
Provides revision id for Alta interposer.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.39
arrayDiskState mandatory
The current condition of the array disk. Possible states: 0: Unknown 1: Ready - Available for use, but no RAID configuration has been assigned. 2: Failed - Not operational. 3…
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.4
arrayDiskEncryptionCapable mandatory
Indicates if physical disk is Encryption capable. Value: 1 - Capable, 0 - Not Capable, 99 - Not Applicable
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.40
arrayDiskEncrypted mandatory
Indicates if the physical disk has encryption enabled. Value: 1 - Yes, 0 - No, 99 - Not Applicable
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.41
arrayDiskPowerState mandatory
Indicates power state of a physical drive. Value: 0 - Spun up, 1- Spun down, 255 - Transition, 99 - Not Applicable
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.42
arrayDiskDriveWriteCache mandatory
Indicates drive write cache capability for PCIe SSD devices. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined/Not Applicable
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.43
arrayDiskModelNumber mandatory
Provides PCIe SSD device model number.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.44
arrayDiskLifeRemaining mandatory
Provides PCIe SSD device life remaining in percentage. Value: 0..100, 999 - Undetermined/Not Applicable
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.45
arrayDiskDriverVersion mandatory
Provides PCIe SSD device driver version.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.46
arrayDiskReadOnly mandatory
Provides PCIe SSD's Read Only attribute. Possible Values: Yes, No, Not Applicable
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.48
arrayDiskRemainingRatedWriteEndurance mandatory
Provides PCIe SSD device Remaining Rated Write Endurance Possible Values: 0-100% ,Not Available/Not Applicable
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.49
arrayDiskSeverity obsolete
This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
columnEnumeration.1.3.6.1.4.1.674.10893.1.20.130.4.1.5
arrayDiskSectorSize mandatory
Provides the information regarding sector size of array disk. Possible values are: 512 or 4096.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.50
arrayDiskPICapable mandatory
Provides the information regarding T10 PI capability of Array disk. Possible values are: 0 (T10 PI incapable) or 1 (T10 PI capable).
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.51
arrayDiskMaxLinkWidth mandatory
Provides the information regarding Max Link Width of Array disk. Possible values are: 0 - 8.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.52
arrayDiskNegotiatedLinkWidth mandatory
Provides the information regarding Negtioated Link Width of Array disk. Possible values are: 0 - 8.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.53
nonRAIDdiskCachePolicy mandatory
Displays the current disk write cache policy of the NonRAID disk. Possible values are: Enabled - Disabled.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.54
arraydiskCachePolicy mandatory
Displays the current disk write cache policy of the array disk. Possible values are: Enabled - Disabled - Default.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.55
arraydiskISECapable mandatory
A boolean value depicitng if the disk is Instant Secure Erase Capable or not.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.56
arraydiskWWN mandatory
Displays WWN for a disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.57
arraydiskEncryptionProtocol mandatory
Displays Encrption Protocol for a disk. Possible Values: 0: No encryption 1: TCG Enterprise SSC 2: TCG Opal SSC
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.58
arraydiskErrorRecoverable mandatory
Indicates if INIT error drive is recoverable. Values: 1- Yes, 0 - No, 99 - Not available / Not applicable.
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.59
arrayDiskProductID mandatory
The model number of the array disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.6
arraydiskErrorDescription mandatory
Displays description of INIT error.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.60
arraydiskAvailableSpare mandatory
Displays Available Spare for a PCIe SSD. Possible Values: 0-100 % Note: A value of 9999 indicates Not Applicable or Not Available
columnInteger32.1.3.6.1.4.1.674.10893.1.20.130.4.1.61
arrayDiskSerialNo mandatory
The array disk's unique identification number from the manufacturer.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.7
arrayDiskRevision mandatory
The firmware version of the array disk.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.8
arrayDiskEnclosureID mandatory
The SCSI ID of the enclosure processor to which this array disk belongs.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.674.10893.1.20.130.4.1.9