SWITCH-INTERFACE-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
35

rcIfPortPHYTable

table
.1.3.6.1.4.1.8886.6.1.1.7.1.2.1 · 1 row entry · 17 columns
Open in standard view 
A table of switch port and associated properties.
rcIfPortPHYEntry entry .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1
An entry containing PHY management information applicable to a particular
interface port.
Indexes
rcIfPortPHYIndex
Column Syntax OID
rcIfPortPHYIndex
A unique value, greater than zero, for each port in the managed system.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.1
rcIfPortPHYExistence
A value of false(2) is returned, if there is no PHY in the port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.2
rcIfPortPHYMAUNum
MAU number in the port. A value 0 is returned, if there is no PHY in the port.
a value more than 1 is returned ,if the port is combo port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.3
rcIfPortPHYAdminStatus
The desired state of the port.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.4
rcIfPortPHYOperStatus
The current operational state of the port. If rcIfPortPHYAdminStatus is down(2)
then rcIfPortOperStatus should be down(2). While rcIfPortPHYAdminStatus is
changed to up(1), rcIfPortPHYOperStatus should remain in the do…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.5
rcIfPortPHYSpeedGet
The actual speed state of the active MAU in the port. A value of illegal(0)
is retuned if the interface port is not configured for an acceptable value.
A value of unknown(1) is returned when rcIfPortPHYOperStatus indi…
Enumeration
Enumerated Values:
0illegal
1unknown
2speed-10M
3speed-100M
4speed-1000M
5speed-10G
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.6
rcIfPortPHYDuplexGet
The actual duplex state of the active MAU in the port. A value of illegal(0)
is retuned if the interface port is not configured for an acceptable value.
A value of unknown(1) is returned when rcIfPortPHYOperStatus indi…
Enumeration
Enumerated Values:
0illegal
1unknown
2half
3full
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.7
rcIfPortPHYFlowControlRecvStatus
The actual flow control state in receiving direction.
SWITCH-TCEnableVar
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.8
rcIfPortPHYFlowControlSendStatus
The actual flow control state in sending direction.
SWITCH-TCEnableVar
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.9
rcIfPortPHYMdiStatus
The actual automatic MDI crossover state. A value of illegal(0)
is retuned if the interface port is not configured for an
acceptable value.
Enumeration
Enumerated Values:
0illegal
1unknown
2normal
3xover
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.10
rcIfPortPHYActiveMAUIndex
The index of active MAU in the port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.11
rcComboPortMediaMode
The mode of combo.
Enumerationr/w
Enumerated Values:
0not-support
1auto
2fiber-forced
3copper-forced
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.12
rcComboPortMediaPriority
Indicates which types of media has higher priority to be active than another one.
Enumerationr/w
Enumerated Values:
0not-support
1fiber
2copper
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.13
rcComboPortMediaActive
Used to identify whether this Combo port currently be in the active state.
Enumeration
Enumerated Values:
0unavailable
1fiber
2copper
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.14
rcIfPortSfpAutoDetect
Used to identify whether this port is in sfp auto-detect mode.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.15
rcIfPortSfpPortTypeGet
The SFP fiber mode operator state.
Enumeration
Enumerated Values:
0unknown
1copper
2fiber100
3fiber1000
4fiber10000
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.16
rcIfPortPHYEEEAutoGet
EEE-Auto Operate Mode.
Enumeration
Enumerated Values:
0not-support
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.17

rcIfPortMAUTable

table
.1.3.6.1.4.1.8886.6.1.1.7.1.2.2 · 1 row entry · 13 columns
Open in standard view 
A table of switch port and associated properties.
rcIfPortMAUEntry entry .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1
An entry containing management information for a particular MAU in the port.
Indexes
rcIfPortPHYIndex rcIfPortMAUIndex
Column Syntax OID
rcIfPortMAUIndex
An index based 1 that uniquely identifies a MAU from the other
MAUs in the port. It should be less than rcIfPortPHYMAUNum
in the port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.1
rcIfPortMAUType
This object identifies the MAU type and indicates capability.
values for MAU types above are defined in standard IEEE 802.3
DOT3-MAU-MIB.my(RFC 3636). It can respect MAU capability and
media information.Specially,dot…
Enumeration
Enumerated Values:
0unknown
5dot3-10BASE-T
16dot3-100BASE-TX
18dot3-100BASE-FX
22dot3-1000BASE-X
30dot3-1000BASE-T
31dot3-10GBASE-X
33dot3-10GBASE-R
37dot3-10GBASE-W
99rc-1000BASE-P
100dot3-1000BASE-T1
101dot3-1000BASE-T2
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.2
rcIfPortMAUConnectorType
This object identifies the MAU connector type.
Enumeration
Enumerated Values:
0unknown
1other
2sfp
3sfp-plus
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.3
rcIfPortMAUConnectorStatus
This object identifies the MAU connector status. A value of unknown(0)
is returned if the connector can not been identified. A value of
error(1) is returned if the connector type is can not been
supported by the MAU. …
Enumeration
Enumerated Values:
0unknown
1error
2not-present
3present
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.4
rcIfPortMAUSpeedSet
The desired speed state for the MAU. Some MAU may not support
setting the value of this object to some of the enumerated values.
Enumerationr/w
Enumerated Values:
1auto-negotiate
2speed-10M
3speed-100M
4speed-1000M
5speed-10G
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.5
rcIfPortMAUDuplexSet
The desired duplex state of the MAU. Some MAU may not support
setting the value of this object to some of the enumerated values.
Enumerationr/w
Enumerated Values:
1auto-negotiate
2half
3full
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.6
rcIfPortMAUFlowControlEnable
Set symmetric flow control of the MAU to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.7
rcIfPortMAUFlowControlRecvEnable
Set the flow control in receiving direction to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.8
rcIfPortMAUFlowControlSendEnable
Set the flow control in sending direction to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Textual Convention: SWITCH-TCEnableVar Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.9
rcIfPortMAUMdiMode
The desired automatic MDI crossover mode of the MAU. Some MAU may
not support setting the value of this object to some of the
enumerated values.
Enumerationr/w
Enumerated Values:
1auto-detect
2normal
3xover
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.10
rcIfPortMAUStatus
The actual state of the MAU. In a combo port, only one MAU
in the port can operate in active state. This object dose not
support writing operation yet!
Enumerationr/w
Enumerated Values:
1active
2suspend
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.11
rcIfPortMAUSfpPortType
The SFP fiber mode admin state.
Enumerationr/w
Enumerated Values:
0autodetect
1copper
2fiber100
3fiber1000
4fiber10000
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.12
rcIfPortEEEAutoMode
EEE-Auto Admin Mode.
Enumerationr/w
Enumerated Values:
0not-support
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.13

rcComboMediaTable

table
.1.3.6.1.4.1.8886.6.1.1.7.1.2.3 · 1 row entry · 5 columns
Open in standard view 
A table of Combo port and associated properties.
rcComboMediaEntry entry .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1
Table entry for Combo media status information.
Indexes
rcComboPortId rcComboPortMedia
Column Syntax OID
rcComboPortId
An index based 1 that uniquely identifies a Ether like interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1.1
rcComboPortMedia
An index based 1 that uniquely identifies a Ether like interface.
Enumeration
Enumerated Values:
0not-support
1fiber
2copper
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1.2
rcComboPortDescription
The description of a combo interface of the swtich.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1.3
rcComboPortDuplex
The configurated duplex for this interface.
Enumerationr/w
Enumerated Values:
0not-support
1auto-negotiate
2half
3full
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1.5
rcComboPortMdiXMode
Automatic MDI Crossover mode of a port/PHY.
Enumerationr/w
Enumerated Values:
0not-support
1auto
2normal
3xover
 .1.3.6.1.4.1.8886.6.1.1.7.1.2.3.1.9