rcIfPortMAUType

SWITCH-INTERFACE-PORT-MIB · .1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.2
MIB view Table view

Object

column Enumeration 
This object identifies the MAU type and indicates capability. 
values for MAU types above are defined in standard IEEE 802.3 
DOT3-MAU-MIB.my(RFC 3636). It can respect MAU capability and 
media information.Specially,dot3-1000BASE-T1 indicates 1000BASE-T
only support auto-negotiation,and dot3-1000BASE-T2 indicates 
1000BASE-T only support 1000M and full-duplex.'unknown' indicates
it is uncertain

Context

MIB
SWITCH-INTERFACE-PORT-MIB
OID
.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.2
Type
column
Access
readonly
Status
current
Parent
rcIfPortMAUEntry
Table
rcIfPortMAUTable
Siblings
12

Syntax

Enumeration

Values & Constraints

Enumerated Values
0unknown
5dot3-10BASE-T
16dot3-100BASE-TX
18dot3-100BASE-FX
22dot3-1000BASE-X
30dot3-1000BASE-T
31dot3-10GBASE-X
33dot3-10GBASE-R
37dot3-10GBASE-W
99rc-1000BASE-P
100dot3-1000BASE-T1
101dot3-1000BASE-T2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIfPortMAUIndex
An index based 1 that uniquely identifies a MAU from the other MAUs in the port. It should be less than rcIfPortPHYMAUNum in the port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.1
rcIfPortMAUMdiMode
The desired automatic MDI crossover mode of the MAU. Some MAU may not support setting the value of this object to some of the enumerated values.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.10
rcIfPortMAUStatus
The actual state of the MAU. In a combo port, only one MAU in the port can operate in active state. This object dose not support writing operation yet!
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.11
rcIfPortMAUSfpPortType
The SFP fiber mode admin state.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.12
rcIfPortEEEAutoMode
EEE-Auto Admin Mode.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.13
rcIfPortMAUConnectorType
This object identifies the MAU connector type.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.3
rcIfPortMAUConnectorStatus
This object identifies the MAU connector status. A value of unknown(0) is returned if the connector can not been identified. A value of error(1) is returned if the connector type…
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.4
rcIfPortMAUSpeedSet
The desired speed state for the MAU. Some MAU may not support setting the value of this object to some of the enumerated values.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.5
rcIfPortMAUDuplexSet
The desired duplex state of the MAU. Some MAU may not support setting the value of this object to some of the enumerated values.
columnEnumeration.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.6
rcIfPortMAUFlowControlEnable
Set symmetric flow control of the MAU to enable(1) or disable(2).
columnSWITCH-TCEnableVar.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.7
rcIfPortMAUFlowControlRecvEnable
Set the flow control in receiving direction to enable(1) or disable(2).
columnSWITCH-TCEnableVar.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.8
rcIfPortMAUFlowControlSendEnable
Set the flow control in sending direction to enable(1) or disable(2).
columnSWITCH-TCEnableVar.1.3.6.1.4.1.8886.6.1.1.7.1.2.2.1.9