rcIfPortPHYIndex
SWITCH-INTERFACE-PORT-MIB ·
.1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.1
Object
column
SNMPv2-SMIInteger32
A unique value, greater than zero, for each port in the managed system.
Context
- MIB
- SWITCH-INTERFACE-PORT-MIB
- OID
.1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcIfPortPHYEntry
- Table
- rcIfPortPHYTable
- Siblings
- 16
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIfPortPHYMdiStatus The actual automatic MDI crossover state. A value of illegal(0)
is retuned if the interface port is not configured for an
acceptable value. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.10 |
| rcIfPortPHYActiveMAUIndex The index of active MAU in the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.11 |
| rcComboPortMediaMode The mode of combo. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.12 |
| rcComboPortMediaPriority Indicates which types of media has higher priority to be active than another one. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.13 |
| rcComboPortMediaActive Used to identify whether this Combo port currently be in the active state. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.14 |
| rcIfPortSfpAutoDetect Used to identify whether this port is in sfp auto-detect mode. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.15 |
| rcIfPortSfpPortTypeGet The SFP fiber mode operator state. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.16 |
| rcIfPortPHYEEEAutoGet EEE-Auto Operate Mode. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.17 |
| rcIfPortPHYExistence A value of false(2) is returned, if there is no PHY in the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.2 |
| rcIfPortPHYMAUNum MAU number in the port. A value 0 is returned, if there is no PHY in the port.
a value more than 1 is returned ,if the port is combo port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.3 |
| rcIfPortPHYAdminStatus The desired state of the port. | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.4 |
| rcIfPortPHYOperStatus The current operational state of the port. If rcIfPortPHYAdminStatus is down(2)
then rcIfPortOperStatus should be down(2). While rcIfPortPHYAdminStatus is
changed to up(1), rcIfP… | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.5 |
| rcIfPortPHYSpeedGet The actual speed state of the active MAU in the port. A value of illegal(0)
is retuned if the interface port is not configured for an acceptable value.
A value of unknown(1) is … | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.6 |
| rcIfPortPHYDuplexGet The actual duplex state of the active MAU in the port. A value of illegal(0)
is retuned if the interface port is not configured for an acceptable value.
A value of unknown(1) is … | column | Enumeration | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.7 |
| rcIfPortPHYFlowControlRecvStatus The actual flow control state in receiving direction. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.8 |
| rcIfPortPHYFlowControlSendStatus The actual flow control state in sending direction. | column | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.1.7.1.2.1.1.9 |