SUPERMICRO-PTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
147

fsPtpTable

table
.1.3.6.1.4.1.10876.101.2.45.1.1.4 · 1 row entry · 6 columns
Open in standard view 
Information describing the parameters of the switch/router
instances.
fsPtpEntry entry .1.3.6.1.4.1.10876.101.2.45.1.1.4.1
Information describing the parameters of the switch/router per
virtual instance. The entry in this table is created using the
fsPtpContextRowStatus object only if the virtual context is
existing in the system. The entr…
Indexes
fsPtpContextId
Column Syntax OID
fsPtpContextId
A 32-bit unique context identifier for each entry. Each virtual
context will be able to run PTP protocol individually and this
distinguishes mutiple virtual contexts present in the switch/router.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.1
fsPtpAdminStatus
Enable or disable the Precision Time Protocol on this virtual context.
The default value is disabled.
In disabled state, the PTP protocol will be non operational in the
virtual context. The resources alone will be re…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.2
fsPtpTraceOption
This object takes the same value as fsPtpGblTraceOption.
This object accepts the trace values directly from the user.
Alternatively, this object will also be affected if the global
trace object is modified
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.3
fsPtpContextType
Displays the type of context
Enumeration
Enumerated Values:
1l2Context
2l3Context
3l2Andl3Context
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.4
fsPtpPrimaryDomain
This object specifies the primary domain. This is the domain
which can configure the system clock. By default, this will be
configured to default domain id (0). The administrator should
explicitly configure this object.…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.5
fsPtpContextRowStatus
RowStatus for creating/deleting the entries into this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.1.4.1.6

fsPtpDomainDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.2.1 · 1 row entry · 5 columns
Open in standard view 
Table Contains domains information of the node
fsPtpDomainDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.2.1.1
Contains domains information of the node
Indexes
fsPtpContextId fsPtpDomainNumber
Column Syntax OID
fsPtpDomainNumber
This is the unique identifier of the domain. This domain id defines
the scope of the PTP message communication, state, operations, data
sets and timescale.
The domain identifier 0 corresponds to default domain id.
Doma…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.2.1.1.1
fsPtpDomainClockMode
This indicates the operating mode of the clock in this domain.
boundary - specifies it is boundary clock.
ordinary - specifies it is ordinary clock.
transparent - specifies it is
end-to-end/peer-to-peer transparent cl…
Enumerationr/w
Enumerated Values:
1boundary
2ordinary
3transparent
4forward
5management
 .1.3.6.1.4.1.10876.101.2.45.1.2.1.1.2
fsPtpDomainClockIdentity
This is the unique identity of the local clock or management node
associated with this domain. The clock identity values shall be taken
from either the IEEE EUI-64 individual assigned numbers as specified
in 7.5.2.2.2,…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.2.1.1.3
fsPtpDomainGMClusterQueryInterval
This is the log to the base 2 of mean interval in seconds
between unicast announce messages from grand master
cluster member, it will be used.If a request is not granted
by a port, the request shall be repeated after…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.2.1.1.4
fsPtpDomainRowStatus
RowStatus for creating the entries into this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.2.1.1.5

fsPtpClockDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.3.1 · 1 row entry · 13 columns
Open in standard view 
Table Contains information of the clock on particular domain.
entry will be created in this table with defalut values
once the entry is created in the fsPtpDomainDataSetTable with 
fsPtpDomainClockMode as boundary or an ordinary clock. If the clock 
mode is changed to other than boundary or an ordinary the corresponding 
entry in this table will be deleted
fsPtpClockDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.3.1.1
Contains the information of the clock on a particular doamin. This
table will be initialised with default values if the clock is
operating as a boundary or ordinary clock in the domain.
Indexes
No indexes recorded
Column Syntax OID
fsPtpClockIdentity
This is the unique identity of the local clock or management node.
This should be the fsptpDomainClockIdentity of the domain indicated
by the fsPtpDomainNumber. Configuration of this value will take effect
only when th…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.1
fsPtpClockTwoStepFlag
This value is TRUE if the clock is two step clock, otherwise it is
FALSE.
If this value is configured as TRUE, then PTP will transmit the
originTimeStamp only through follow-up messages.
Configuring this value will mak…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.2
fsPtpClockNumberPorts
This indicates the number of PTP ports on the device. For an ordinary
clock this value should be 1. This value can be configured if
fsPtpDomainRowStatus is not in service
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.3
fsPtpClockClass
It denotes the traceability of the time or frequency distributed by
the grandmaster clock. This value is used by the BMC algorithm to
select the best master clock.
This should be initialized after initializing ptpClo…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.4
fsPtpClockAccuracy
This indicates the accuracy of the clock. This should be initialized
after ptpClockClass. This initialization value depends on the accuracy
of the clock during initialization. This value depends on ptpClockClass
and ptp…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.5
fsPtpClockOffsetScaledLogVariance
This value is an estimate of the variations of the local clock
from a linear timescale when it is not synchronized to another
clock using the protocol. The initialization value depends on the
inherent characteristics …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.6
fsPtpClockPriority1
This value is used by BMC algorithm to select the best master
clock. Lower values take precedence.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.7
fsPtpClockPriority2
This value is used by BMC algorithm to select the best master clock.
This is used as a tiebreaker when the BMC failes to order the clock
using ptpClockPriority1, ptpClockClass, ptpClockAccuracy and
ptpClockOffsetSca…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.8
fsPtpClockSlaveOnly
Configuring this value as true will make the clock to behave as slave
clock.
A boundary clock can not be a slave only clock.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.9
fsPtpClockPathTraceOption
This is the path trace enable/disable option. Configuring this value
as true will make the path trace mechanism operational.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.10
fsPtpClockAccMasterMaxSize
This is the Maximum number of acceptable master table Entries configured
in the domain in this context.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.11
fsPtpClockSecurityEnabled
This is used to enable/disable of security protocol. Configuring this
as TRUE, makes all the PTP communication to use Security Protocol
extension. Default value is false.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.12
fsPtpClockNumOfSA
This represents the maximum number of security associations
supported by the clock, including all incoming and outgoing
SAs as well as both static and dynamic SAs.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.3.1.1.13

fsPtpCurrentDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.4.1 · 1 row entry · 5 columns
Open in standard view 
Table Contains synchronization information on a particular
domain. entry will be created in this table with defalut 
values once the entry is created in the fsPtpDomainDataSetTable
with fsPtpDomainClockMode as boundary or an ordinary clock. 
If the clock mode is changed to other than boundary or an 
ordinary the corresponding entry in this table will be deleted.
fsPtpCurrentDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.4.1.1
Contains synchronization information on a particular domain.
Indexes
No indexes recorded
Column Syntax OID
fsPtpCurrentStepsRemoved
This is the number of communication path traversed between local
clock and the grandmaster clock. Slave clock will update this field
once port is selected as slave.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.1
fsPtpCurrentOffsetFromMaster
This is the current value of the time difference scalednanoseconds
between a master and a slave as computed by the slave.

The time interval field represents the values in scalednanoseconds.
The scalednan…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.2
fsPtpCurrentMeanPathDelay
This is the current value of the mean propagation time scalenanoseconds
between a master and a slave as computed by the slave.

The time interval field represents the values in scalednanoseconds.
The scal…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.3
fsPtpCurrentMasterToSlaveDelay
This attribute is the propagation time for a sync message
travelling between master to slave clocks

The time interval field represents the values in scalednanoseconds.
The scalednanoseconds member is the …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.4
fsPtpCurrentSlaveToMasterDelay
This attribute is the propagation time for a sync message
travelling between slave to master clocks

The time interval field represents the values in scalednanoseconds.
The scalednanoseconds member is the …
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.4.1.1.5

fsPtpParentDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.5.1 · 1 row entry · 12 columns
Open in standard view 
Table Contains parent clock information on a particular domain.
entry will be created in this table with defalut 
values once the entry is created in the fsPtpDomainDataSetTable
with fsPtpDomainClockMode as boundary or an ordinary clock. 
If the clock mode is changed to other than boundary or an 
ordinary the corresponding entry in this table will be deleted.
fsPtpParentDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.5.1.1
Contains parent clock information on a particular domain.
Indexes
No indexes recorded
Column Syntax OID
fsPtpParentClockIdentity
This is the clock identity of the port on the master that issues
sync messages used in synchronizing this clock. The initial value
of this field is the value of ptpClockIdentity
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.1
fsPtpParentPortNumber
This is the port number identity of the port on the master that issues
sync message used in synchronizing this clock. Combination of
ptpParentClockIdentity and ptpParentPortNumber gives the port identity
of the parent…
FsPtpPortNumber
Textual Convention: FsPtpPortNumber Integer32
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.2
fsPtpParentStats
TRUE value of this field indicates that the clock has a slave port
and computed statistically valid estimate of
observedParentOffsetScaledLogVariance and
observedParentClockPhaseChangeRate. The initial value of this …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.3
fsPtpParentObservedOffsetScaledLogVariance
This is an estimate of the parent clock's PTP variance as observed by
the slave clock. Computation of this value is optional one. If this is
not computed then ptpParentStats will be set false. The initial value
is 0xF…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.4
fsPtpParentObservedClockPhaseChangeRate
This is an estimate of the parent clock's phase change rate as
observed by the slave clock. Computation of this value is optional one.
If this is not computed then ptpParentStats will be set false.
The initial value i…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.5
fsPtpParentGMClockIdentity
This is the clock identity attribute of the grand master clock.
The initial value is ptpClockIdentity.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.6
fsPtpParentGMClockClass
This is the clock class of the grandmaster. The
initialization value of this variable is ptpClockClass.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.7
fsPtpParentGMClockAccuracy
This is the clock accuracy of the grandmaster. The
initialization value of this variable is ptpClockAccuracy
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.8
fsPtpParentGMClockOffsetScaledLogVariance
This is the offset scaled log variance of the grandmaster. The
initialization value of this variable is
ptpClockOffsetScaledLogVariance
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.9
fsPtpParentGMPriority1
This is the priority1 of the grandmaster clock. The
initialization value of this variable is ptpClockPriority1
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.10
fsPtpParentGMPriority2
This is the priority2 of the grandmaster clock. The
initialization value of this variable is ptpClockPriority2
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.11
fsPtpParentClockObservedDrift
This is attribute of the parent dataset represents the observed drift
of the master clock to which a slave clock is synchronizing
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.5.1.1.12

fsPtpTimeDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.6.1 · 1 row entry · 7 columns
Open in standard view 
Table Contains parent Time properties information of the
clock on a particular domain. entry will be created in 
this table with defalut values once the entry is created 
in the fsPtpDomainDataSetTable with fsPtpDomainClockMode as
boundary or an ordinary clock. If the clock mode is changed 
to other than boundary or an ordinary the corresponding 
entry in this table will be deleted.
fsPtpTimeDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.6.1.1
Contains parent Time properties information of the
clock on a particular domain
Indexes
No indexes recorded
Column Syntax OID
fsPtpTimeCurrentUTCOffset
If systems epoch is the PTP epoch then this value indicates the offset
in seconds between TAI and UTC.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.1
fsPtpTimeCurrentUTCOffsetValid
Value of this variable is TRUE if the fsPtpTimeCurrentUTCOffset is
known to be correct.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.2
fsPtpTimeLeap59
If the systems epoch is PTP epoch then TRUE value of this variable
indicates that the last minute of the current UTC day contains 59
seconds.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.3
fsPtpTimeLeap61
If the systems epoch is PTP epoch then TRUE value of this variable
indicates that the last minute of the current UTC day contains 61
seconds.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.4
fsPtpTimeTimeTraceable
This variable is TRUE if the timescale and value of
fsPtpTimeCurrentUTCOffset are traceable to a primary reference
otherwise, the value shall be FALSE.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.5
fsPtpTimeFrequencyTraceable
This variable is TRUE if the frequecy determining the timescale is
traceable to a primary reference otherwise, the value shall be FALSE.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.6
fsPtpTimeTimeSource
This is the source of time used by the grandmaster clock. If the time
source is known at the time of initialization then the value will be set
to that otherwise the initial value is INTERNAL_OSCILLATOR(160).
Enumeration
Enumerated Values:
16atomicclock
32gps
48terrestrialradio
64ptp
80ntp
96handset
144other
160internaloscillator
255reserved
 .1.3.6.1.4.1.10876.101.2.45.1.6.1.1.7

fsPtpPortConfigDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.7.1 · 1 row entry · 28 columns
Open in standard view 
Table Contains PTP configuration information
for a particular port of boundary or an ordinary clock
fsPtpPortConfigDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.7.1.1
Contains PTP configuration information for a particular port.
valid fsPtpPortInterfaceType and fsPtpPortIfaceNumber need to be given to
make this entry active
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpPortIndex
Column Syntax OID
fsPtpPortIndex
The index value used to identify the port component on the device.
The value of this object is used as a port index to the
fsPtpPortConfigDataSetTable.Since ifindex will not be created in CFA
for vlan interfaces. Fre…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.1
fsPtpPortClockIdentity
This is the clock Identity of the port
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.2
fsPtpPortInterfaceType
This denotes the type of the interface. PTP port bears a seperate
meaning than the one that are normally defined in interface mibs.
PTP can run over physical interfaces, VLAN identifiers or IVR
interfaces. Hence this o…
Enumerationr/w
Enumerated Values:
1udpipv4
2udpipv6
3ieee8023
4devicenet
5controlnet
6profitnet
7ieee8021
65534unknown
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.3
fsPtpPortIfaceNumber
This denotes the interface number assigned in the interface manager
of the system. PTP assigned interface numbers are different from the
the values assigned in interface mib. This object denotes the value
assigned in th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.4
fsPtpPortState
This denotes the PTP State of the PTP port as computed by the PTP State
event machine.

initializing:
While a port is in the INITIALIZING state, the port initializes its data
sets, hardware, and communic…
Enumeration
Enumerated Values:
0faulty
1disabled
2initializing
3listening
4uncalibrated
5slave
6premaster
7master
8passive
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.5
fsPtpPortMinDelayReqInterval
This is the log to the base 2 of the delay request interval
in seconds. This speifies the time to the members devices to
send delay request messages when the port is in the master.
specify the minimum permitted mean t…
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.6
fsPtpPortPeerMeanPathDelay
This is an estimate of the current one-way propagation delay in
scalednanoseconds on the link attached to this port, calculated
using the peer delay mechanism. If the value of the
fsPtpPortDelayMechanism is end-to-en…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.7
fsPtpPortAnnounceInterval
This is the log to the base 2 of the mean Announce message intervali
in seconds.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.8
fsPtpPortAnnounceReceiptTimeout
This is the Announce receipt time out value.
This should be an integral multiple of announce interval
in seconds
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.9
fsPtpPortSyncInterval
This is the logarithm to the base 2 of the sync message interval
in seconds
Integer32r/w
Constraints:
range: -1-1
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.10
fsPtpPortSynclimit
This specifies the maximum clock offset value before
PTP attempts to resynchronize.The range of this object
should be 50 .. 1000000000 nanoseconds

The time interval field represents the values in scaled…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.11
fsPtpPortDelayMechanism
This indicates the propagation delay measuring option used by the port
in computing meanpathDelay.
Enumerationr/w
Enumerated Values:
1endtoend
2peertopeer
255disabled
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.12
fsPtpPortMinPdelayReqInterval
This is the value of Pdelay_Req interval in seconds. This value will be
specified in terms of logarithm to the base 2.
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.13
fsPtpPortVersionNumber
This indicates the PTP version in use on the port.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.14
fsPtpPortUnicastNegOption
This indicates the unicast negotiation enable/disable option.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.15
fsPtpPortUnicastMasterMaxSize
This indicates the maximum size of the Unicast
master table in this port.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.16
fsPtpPortAccMasterEnabled
This is the enable/disable option for Acceptable master table in this
Port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.17
fsPtpPortNumOfAltMaster
A port, port-A not in the MASTER state, shall transmit multicast
Announce messages when the number of other ports that:
> Are currently transmitting qualified (see 9.3.2.5)
Announce messages with flagField.alter…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.18
fsPtpPortAltMulcastSync
This is TRUE and if the port is transmitting multicast
announce message with alternate master flag true then the slave
port can also transmit multicast sync messages with alternate
master flag as true
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.19
fsPtpPortAltMulcastSyncInterval
This is interval in seconds between the sync messages
transmitted with alternate master flag as true
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.20
fsPtpPortPtpStatus
The effective Operational state of the port in PTP. PTP will be
operational over this interface only when the value of this object
is set to true. Otherwise PTP will be non-operational over this
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.21
fsPtpPortRcvdAnnounceMsgCnt
This is the count of Announce messages received on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.22
fsPtpPortRcvdSyncMsgCnt
This is the count of sync messages received on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.23
fsPtpPortRcvdDelayReqMsgCnt
This is the count of delay request messages received on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.24
fsPtpPortRcvdDelayRespMsgCnt
This is the count of delay response messages received on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.25
fsPtpPortTransDelayReqMsgCnt
This is the count of delay request messages transmitted on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.26
fsPtpPortDiscardedMsgCnt
This is the discarded ptp message count on the port
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.27
fsPtpPortRowStatus
RowStatus for creating the entries into this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.7.1.1.28

fsPtpForeignMasterDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.8.1 · 1 row entry · 3 columns
Open in standard view 
Table contains information about the foreign 
master
fsPtpForeignMasterDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.8.1.1
Contains information about the foreign master
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpForeignMasterClockIdentity fsPtpForeignMasterPortIndex fsPtpPortIndex
Column Syntax OID
fsPtpForeignMasterClockIdentity
Source Clock identity on which the announce message is
received from foreign master
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.8.1.1.1
fsPtpForeignMasterPortIndex
Source port index on which the announce message is
received from foreign master
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.8.1.1.2
fsPtpForeignMasterAnnounceMsgs
This indicates the number of Announce messages from the
foreign master
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.8.1.1.3

fsPtpTransparentDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.9.1 · 1 row entry · 5 columns
Open in standard view 
Table Contains Transparent clock information on a 
particular domain. entry will be created in 
this table with defalut values once the entry is created 
in the fsPtpDomainDataSetTable with fsPtpDomainClockMode as
e2etransparent or p2ptransparent. If the clock mode is changed 
to other than e2etransparent or p2ptransparent the corresponding 
entry in this table will be deleted.
fsPtpTransparentDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.9.1.1
Contains Transparent clock information on a particular domain.
An entry will be created in this table with default values, only
if the clock is operating as a transparent clock in this domain.
Indexes
No indexes recorded
Column Syntax OID
fsPtpTransparentClockIdentity
This is the unique identity of the local clock
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.9.1.1.1
fsPtpTransparentClockTwoStepFlag
This value is TRUE if the clock is two step clock, otherwise it is
FALSE. Configuring this value will make the PTP to move all the ports
associated with this domain identifier to move to INITIALIZING state.
Default va…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.9.1.1.2
fsPtpTransparentClockNumberPorts
This indicates the number of ports in PTP device used by the
transparent clock. This value can be configured if
fsPtpDomainRowStatus is not in service
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.10876.101.2.45.1.9.1.1.3
fsPtpTransparentClockDelaymechanism
If the transparent clock is end-to-end then value of this variable
is 01, if the transparent clock is peer-to-peer then value of this
variable is 02
Enumerationr/w
Enumerated Values:
1endtoend
2peertopeer
 .1.3.6.1.4.1.10876.101.2.45.1.9.1.1.4
fsPtpTransparentClockPrimaryDomain
This is the domain number of the primary syntonization domain
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.9.1.1.5

fsPtpTransparentPortDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.10.1 · 1 row entry · 9 columns
Open in standard view 
Table contains the port configuration of the particular
port of the transparent clock
fsPtpTransparentPortDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.10.1.1
PTP configuration information for a particular port for the
transparent clock. Valid fsPtpTransparentPortInterfaceType
and fsPtpTransparentPortIfaceNumber should be given to
create the entry in this table otherwise e…
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpTransparentPortIndex
Column Syntax OID
fsPtpTransparentPortIndex
The index value used to identify the port component on
the transparent clock. The value of this object is used
as a port index to the ptpTransparentPortDataSetTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.1
fsPtpTransparentPortInterfaceType
This denotes the type of the interface. PTP port bears a seperate
meaning than the one that are normally defined in interface mibs.
PTP can run over physical interfaces, VLAN identifiers or IVR
interfaces. Hence this o…
Enumerationr/w
Enumerated Values:
1udpipv4
2udpipv6
3ieee8023
4devicenet
5controlnet
6profitnet
7ieee8021
65534unknown
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.2
fsPtpTransparentPortIfaceNumber
This denotes the interface number assigned in the interface manager
of the system. PTP assigned interface numbers are different from the
the values assigned in interface mib. This object denotes the value
assigned in th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.3
fsPtpTransparentPortClockIdentity
This is the clock identity of the transparent clock. This is the
index to the ptpPortConfigDataSetTable.
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.4
fsPtpTransparentPortMinPdelayReqInterval
This is the Pdelay_Req interval. This is used if the
transparent clock is Peer-to-Peer.
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.5
fsPtpTransparentPortFaultyFlag
This is the faulty status of the port. This value will be made TRUE
if the port enters into Faulty state.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.6
fsPtpTransparentPortPeerMeanPathDelay
If the ptpTransparentClockDelaymechanism is P2P then this
indicates the mean propagation delay of the ingress link
connected to this port

The time interval field represents the values in scalednanosecon…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.7
fsPtpTransparentPortPtpStatus
The effective Operational state of the port in PTP. PTP will be
operational over this interface only when the value of this object
is set to true. Otherwise PTP will be non-operational over this
interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.8
fsPtpTransparentPortRowStatus
RowStatus for creating the entries into this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.10.1.1.9

fsPtpGrandMasterClusterDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.11.1 · 1 row entry · 4 columns
Open in standard view 
Table contains grand master cluster members. Max
number of entries in this table should not be more
than 5.
          
Currently this table is not supported.
This table will be supported in the future
fsPtpGrandMasterClusterDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.11.1.1
Contains grand master cluster members
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpGrandMasterClusterNetworkProtocol fsPtpGrandMasterClusterAddLength fsPtpGrandMasterClusterAddr
Column Syntax OID
fsPtpGrandMasterClusterNetworkProtocol
This indicates the network protocol of the port of the
grand master cluster
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.11.1.1.1
fsPtpGrandMasterClusterAddLength
This indicates the length of the fsptpGrandMasterClusterAddr
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.11.1.1.2
fsPtpGrandMasterClusterAddr
This indicates the protocol address of the port of the
grand master cluster member
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.11.1.1.3
fsPtpGrandMasterClusterRowStatus
This indicates the status of this entry, is valid or not.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.11.1.1.4

fsPtpUnicastMasterDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.12.1 · 1 row entry · 4 columns
Open in standard view 
Table contains unicast masters on the port
          
Currently this table is not supported.
This table will be supported in the future
fsPtpUnicastMasterDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.12.1.1
Contains unicast masters on the port
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpPortIndex fsPtpUnicastMasterNetworkProtocol fsPtpUnicastMasterAddLength fsPtpUnicastMasterAddr
Column Syntax OID
fsPtpUnicastMasterNetworkProtocol
This indicates the network protocol of the port of
the unicast master on this port
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.12.1.1.1
fsPtpUnicastMasterAddLength
This indicates the length of fsptpUnicastMasterAddr
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.12.1.1.2
fsPtpUnicastMasterAddr
This indicates the protocol address of the port
of the unicast master on this port
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.12.1.1.3
fsPtpUnicastMasterRowStatus
This indicates the status of this entry, is valid or not.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.12.1.1.4

fsPtpAccMasterDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.13.1 · 1 row entry · 5 columns
Open in standard view 
Table contains acceptable masters for the clock
fsPtpAccMasterDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.13.1.1
Contains acceptable masters for the clock
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpAccMasterNetworkProtocol fsPtpAccMasterAddLength fsPtpAccMasterAddr
Column Syntax OID
fsPtpAccMasterNetworkProtocol
This indicates the network protocol of the port of
the acceptable master of the clock
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.13.1.1.1
fsPtpAccMasterAddLength
This indicates the length of fsptpAccMasterAddr
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.13.1.1.2
fsPtpAccMasterAddr
This indicates the protocol address of the port of
the acceptable master of the clock
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.10876.101.2.45.1.13.1.1.3
fsPtpAccMasterAlternatePriority
If this value is non zero then priority1 of the clock set will be
replaced by this priority for the best master algorithm.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.13.1.1.4
fsPtpAccMasterRowStatus
This indicates the status of this entry, is valid or not.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.13.1.1.5

fsPtpSecKeyDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.14.1 · 1 row entry · 8 columns
Open in standard view 
Table contains list of security keys
          
Currently this table is not supported.
This table will be supported in the future
fsPtpSecKeyDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.14.1.1
contains list of security keys
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpSecKeyId
Column Syntax OID
fsPtpSecKeyId
This is the unique identifier of the security key
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.1
fsPtpSecKeyAlgorithmId
This indicates the algorithm to be used with the
security key
Enumerationr/w
Enumerated Values:
1hmacSha196
2hmacSha256128
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.2
fsPtpSecKeyLength
This indicates the length of fsptpSecKey
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.3
fsPtpSecKey
This field holds the security key
OctetStringr/w .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.4
fsPtpSecKeyStartTime
This indicates validity start time of the key in secs.
This key will be activated by setting the
fsptpSecKeyValid to TRUE
SNMPv2-TCTimeStampr/w
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.5
fsPtpSecKeyExpirationTime
This indicates expiry time of the key in seconds.
Once the key expires then the fsptpSecKeyValid is
set to FALSE
SNMPv2-TCTimeStampr/w
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.6
fsPtpSecKeyValid
This indicates whether the security key is
valid or not
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.7
fsPtpSecKeyRowStatus
This indicates whether the security key is
valid or not
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.14.1.1.8

fsPtpSADataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.15.1 · 1 row entry · 27 columns
Open in standard view 
Table contains list of incoming and outgoing SAs,
The value of the objects can not be modified if it
is dynamically learned SAs though the object is read-write
          
Currently this table is not supported.
This table will be supported in the future
fsPtpSADataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.15.1.1
Contains list of incoming and outgoing SAs
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpSAId
Column Syntax OID
fsPtpSAId
This is the unique ID of SA.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.1
fsPtpSASrcPortNumber
This indicates the port Number of the source
port Identity of the SA. The fsPtpSARowStatus should be in
not in service if it has to be modified. For outgoing SA this can be set
to all-ones indicates that the SA is use…
FsPtpPortNumberr/w
Textual Convention: FsPtpPortNumber Integer32
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.2
fsPtpSASrcAddrLength
This indicates the length of fsptpSASrcAddr.
The fsPtpSARowStatus should be in
not in service if it has to be modified.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.3
fsPtpSASrcAddr
This indicates the protocol address of the source port of the SA.
The fsPtpSARowStatus should be in
not in service if it has to be modified.for outgoing SA this can be
set to all-ones indicates the SA matches all addre…
OctetStringr/w .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.4
fsPtpSADstPortNumber
This indicates the port number of the
destination port of the SA.
The fsPtpSARowStatus should be in
not in service if it has to be modified. For outgoing
SA this value can be set to all-ones indicating that
the SA is …
FsPtpPortNumberr/w
Textual Convention: FsPtpPortNumber Integer32
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.5
fsPtpSADstAddrLength
This indicates the length of the fsptpSADstAddr.
The fsPtpSARowStatus should be in
not in service if it has to be modified.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.6
fsPtpSADstAddr
This indicates the protocol address of the destination port of the SA.
The fsPtpSARowStatus should be in
not in service if it has to be modified. For outgoing SA this can be
set to all-ones indicating that the SA is for…
OctetStringr/w .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.7
fsPtpSASrcClockIdentity
This indicates the clock identity of the source
port of the SA The fsPtpSARowStatus should be in
not in service if it has to be modified.For outgoing SA this can be set
to all-ones indicates that the SA is used for al…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.8
fsPtpSADstClockIdentity
This indicates the clock identity of the destination port of the SA.
The fsPtpSARowStatus should be in
not in service if it has to be modified. For outgoing SA this
can be set to all-ones indicating that the SA is for …
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.9
fsPtpSAReplayCounter
This is the replay counter. This value is used in the replay
protection mechanism.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.10
fsPtpSALifeTimeId
This is the life time Id, This value is used in the replay
protection mechanism.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.11
fsPtpSAKeyId
This indicates which key is used for computation of the
ICV . The value can not be assigned to this variable
if it is a incoming SA
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.12
fsPtpSANextLifeTimeId
This is the next life time Id used in replay protection
mechanism. when fsptpSAReplayCounter rolls over the value
of fsptpSANextLifeTimeId is copied to fsptpSALifeTimeId.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.13
fsPtpSANextKeyId
This indicates the key that is going to be used after this
key expires. The value can not be assigned to this variable
if it is a incoming SA
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.14
fsPtpSATrustState
This indicates the trust state of the incoming SA.
For out going SA this is not used.
Enumeration
Enumerated Values:
0untrusted
1trusted
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.15
fsPtpSATrustTimer
This indicates the trust timer of incoming SA. when it
receives successfully authenticated message this value
is set to fsptpSATrustTimeout. This is decremented by
one by each security event task, when it reaches zero …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.16
fsPtpSATrustTimeout
This indicates the time out period for the authenticated
messages in SA. If it is not recieved successfully authenticated
message within this period the incoming SA will be timed out. For
outgoing SA this is …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.17
fsPtpSAChallengeState
This indicates whether the SA is waiting for a reply
for a challenge request
Enumeration
Enumerated Values:
0idle
1challenging
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.18
fsPtpSAChallengeTimer
This indicates the challenge timer of incoming SA this value is
set to fsptpSAChallengeTimeOut once a challenge-request or
challenge-response-request is sent by the SA. This timer is
decremented by one by each secur…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.19
fsPtpSAChallengeTimeOut
This is the time out period for the challenge-request, or
challenge-response-request message. if challenge-request or
challenge-response-request is not received within this period
then the fsptpSAChallengeState is set …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.20
fsPtpSARequestNonce
This is the request nonce used in challenge-response mechanism
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.21
fsPtpSAResponseNonce
This is the request nonce received in the challenge
request and maintained in the SA
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.22
fsPtpSAChallengeRequired
This value is set to TRUE when a challenge request
needs to be sent to update incoming security association
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.23
fsPtpSAResponseRequired
This value is set to TRUE when a challenge response needs
to be sent
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.24
fsPtpSATypeField
This indicates whether the SA is static or dynamic
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.25
fsPtpSADirection
This indicates the SA's direction, whether incoming SA
or outgoing SA
Enumerationr/w
Enumerated Values:
0in
1out
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.26
fsPtpSARowStatus
RowStatus for creating the entries into this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.15.1.1.27

fsPtpAltTimeScaleDataSetTable

table
.1.3.6.1.4.1.10876.101.2.45.1.16.1 · 1 row entry · 6 columns
Open in standard view 
Table contains list of Alternate timescal keyId and it's parameters. 
It is applicabel for Grandmaster Clock.
fsPtpAltTimeScaleDataSetEntry entry .1.3.6.1.4.1.10876.101.2.45.1.16.1.1
contains list of Alternate timescal Entries
Indexes
fsPtpContextId fsPtpDomainNumber fsPtpAltTimeScaleKeyId
Column Syntax OID
fsPtpAltTimeScaleKeyId
This is the unique identifier of the Alternate Timescale KeyId
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.1
fsPtpAltTimeScalecurrentOffset
The value of currentOffset shall be the offset of the alternate time,
in seconds, from the node's time. The alternate time is the sum
of this value and the node's time.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.2
fsPtpAltTimeScalejumpSeconds
The value of jumpSeconds shall be the size of the next discontinuity,
in seconds, of the alternate time. A value of zero indicates that no
discontinuity is expected. A positive value indicates that the
discontinuity …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.3
fsPtpAltTimeScaletimeOfNextJump
The value of timeOfNextJump shall be the value of the seconds
portion of the transmitting node's time at the time that the next
discontinuity will occur. The discontinuity occurs at the start of the
second indicated …
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.4
fsPtpAltTimeScaledisplayName
The value of displayName shall be the text name of the alternate
timescale. Commonly used acronyms should be used, e.g., NTP, PT,PST,
PDT for Network Time Protocol, Pacific Time, Pacific Standard Time,
and Pacific Dayl…
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.5
fsPtpAltTimeScaleRowStatus
This indicates whether the security key is valid or not
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.45.1.16.1.1.6