fsPtpPortState

This denotes the PTP State of the PTP port as computed by the PTP State
event machine. 
              
initializing:
While a port is in the INITIALIZING state, the port initializes its data 
sets, hardware, and communication facilities. No port of the clock shall 
place any PTP messages on its communication path. If one port of a 
boundary clock is in the INITIALIZING state, then all ports shall be in 
the INITIALIZING state.
              
faulty:
The fault state of the protocol. A port in this state shall not place any 
PTP messages except for management messages that are a required response 
to another management message on its communication path.
              
disabled:
The port shall not place any messages on its communication path. In a 
boundary clock, no activity at the port shall be allowed to affect the 
activity at any other port of the boundary clock. A port in this state 
shall discard all PTP received messages except for management messages.
              
listening:
The port is waiting for the announceReceiptTimeout to expire or to 
receive an Announce message from a master. The purpose of this state is 
to allow orderly addition of clocks to a domain. A port in this state 
shall not place any PTP messages on its communication path except for 
Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, 
or management messages that are a required response to another 
management message.
              
premaster:
The port shall behave in all respects as though it were in the MASTER 
state except that it shall not place any messages on its communication 
path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling
or management messages.
              
master:
The port is behaving as a master port. It will periodically send announce
and sync messages.
                               
passive:
The port shall not place any messages on its communication path except 
for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages
or management messages that are a required response to another management
message.
              
uncalibrated: 
This is a transient state to allow initialization of synchronization 
servos, updating of data sets when a new master port has been selected,
and other implementation-specific activity.
              
slave:
The port is synchronizing to the selected master port.

MIB

SUPERMICRO-PTP-MIB

OID

.1.3.6.1.4.1.10876.101.2.45.1.7.1.1.5

Type

column

Access

readonly

Status

current

Parent

fsPtpPortConfigDataSetEntry

Table

fsPtpPortConfigDataSetTable

Siblings

27